Billion BiPAC 5100 User manual
BIPAC-5100 / 5100W
(Wireless) ADSL Router
Quick Start Guide
Billion BIPAC-5100 / 5100W ADSL Router
1
Package Contents
BIPAC-5100 / 5100WADSL Router
CD-ROM containing the online manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
AC-DC power adapter (12VDC, 1A)
This Quick Start Guide
Do not use the BIPAC-5100 / 5100W in high humidity or high
temperatures.
Do not use the same power source for the BIPAC-5100 / 5100W
as other equipment.
Do not open or repair the case yourself. If the BIPAC-5100 /
5100W is too hot, turn off the power immediately and have it
repaired at a qualified service center.
Warning
Place the BIPAC-5100 / 5100W on a stable surface.
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
A
ttention
For more detailed instructions on configuring and using
the (Wireless) ADSL Firewall Router, please refer to the
on-line manual.
Quick Start Guide
2
The Front LEDs
LED Meaning
1 PPP : Lit steady when there is a PPPoA / PPPoE connection.
2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”).
3 LAN Port
1-4:
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
4 WLAN :
(5100W
only)
Lit green when the wireless connection is established.
Flashes when sending/receiving data.
5 SYS : Lit when the system is ready.
6 PWR : Lit when power is ON.
1 2
3
4
6
5
Billion BIPAC-5100 / 5100W ADSL Router
3
The Rear Ports
Port Meaning
1 Power Switch Power ON/OFF switch
2 PWR Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
4
LAN
1X — 4X
(RJ-45
connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
5 CONSOLE Console port is used for technical support purpose only.
6 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
1
23
4
5
6
＊
＊ Only the BIPAC-5100W has a wireless interface and antenna. BIPAC-5100
router does NOT have an antenna or wireless interface.
Quick Start Guide
4
Connecting Your ADSL Router
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
(For 5100W only: the WLAN LED will be lit steadily).
Billion BIPAC-5100 / 5100W ADSL Router
5
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
Quick Start Guide
6
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and Dial-up
Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
Billion BIPAC-5100 / 5100W ADSL Router
7
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and
click OK to finish the configuration.
Quick Start Guide
8
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Protocols tab.
2. Select TCP/IP Protocol and click
Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
Other manuals for BiPAC 5100
2
This manual suits for next models
3
Table of contents
Other Billion Network Router manuals
Billion
Billion (802.11g) ADSL2+ Modem/Router BIPAC 5102G User manual
Billion
Billion BiPAC 7404V(G)OX/V(G)PX User manual
Billion
Billion BiPAC 4700AZ User manual
Billion
Billion BiPAC 7800GZ User manual
Billion
Billion BiPAC 7402G User manual
Billion
Billion BiPAC 7800GZ(L) User manual
Billion
Billion BiPAC 7202 User manual
Billion
Billion 800VGT User manual
Billion
Billion BiPAC 6404VGP R3 User manual
Billion
Billion BiPAC 7401V(G)P R4 User manual
Billion
Billion BiPAC 7402G User manual
Billion
Billion BiPAC 7800(N) User manual
Billion
Billion BiPAC 7800(N) User manual
Billion
Billion BiPAC 711C2 User manual
Billion
Billion BiPAC 5200G R4 Series User manual
Billion
Billion BiPAC 9800 User manual
Billion
Billion BiPAC 9800 User manual
Billion
Billion BiPAC 7401VGP User manual
Billion
Billion BiPAC 6200NXL Owner's manual
Billion
Billion BiPAC 7800(N) User manual
