When an update is available, notification will pop up on the
settings button. The update will be found in the settings tab.
Keep the firmware updated to its latest version. For more
information visit our site.
Path Mode
Draw lines within the dotted
section to create continuous
haptic feedback.
The draw function can be found in the settings tab.
Dot Mode
Select specific vibro-tactile
motors to activate.
testing haptic feedback
Firmware update
wearing device
putting on tactot
Size control
Undo the velcro body straps and put on and zip up the tactot like
you would wear a vest. Pull straps tightly to fit, then secure along
the velcro guide towards the center of the body.
To account for larger fit,
unravel the end of the
velcro strap to fit your size.
For smaller size, roll up the
end of the velcro strap.
Washing
To wash, remove and machine
wash the detachable inner sleeve.
When dry, reattach the inner sleeve,
following the velcro guides.
Getting started -bhaptics designer
Bhaptics designer is a web based application for
creating and editing your own haptic feedback for Tactot. Visit our
website, www.bhaptics.com, for further information.
Bhaptics Plugin
We support plugins for Unity3D and Unreal
Engine, which can be found in the Asset
Store and Marketplace. When using, please
keep to the plugin manual. And for the other
SDKs, please contact us.
Precautions
Before using the tactot, please read this manual carefully.
Safety and Warnings
* Keep this product out of reach of small childrens.
* Do not fasten the body straps excessively.
* Never disassemble or modify the product.
* Do not expose Tactot to extreme weather conditions.
Care and Handling
* Do not throw, drop, or expose the device to physical impact.
* Keep Tactot away from liquids, it is not water-resistant.
* Do not store tactosy in extreme cold or hot areas.
* Do not use chemicals or cleaning solvents on the device.
Contact our email for customer support.
!
