
BTS43 BK8000L_AUX_20150713 V1.0_r0
About the rechargeable Battery &
1. Regarding the lithiu rechargeable battery:
his Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 3 ~ 4 hours or until the “Charge LED (5)” Indicator
light from On to off which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn’t used
for a while, the battery might need to be recharged. Charge the
battery at least once every month.
2. To recharge the built-in battery:
Connect the Bluetooth Speaker’s “Mini USB socket (3)” with the
Computer’s USB port through USB cable.
he “Charge LED (5)” Indicator will turn On in red, the battery is in
charging.
he “Charge LED (5)” Indicator will turn Off when the rechargeable
battery is fully charged.
Disconnect the USB cable when it is done.
1. Press and hold the “ power (4)” button to turn On the device, a
series of tones will sound from speaker. And the “Mode LED (6)”
indicator is fast blinking in White, it is in Bluetooth pairing mode;
2. hen activate the Bluetooth function in your mobile device (such as
Mobile Phone or Personal Computer), the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3. Your mobile device should show “PBT622” in list, and then select it
for pairing. Waiting for some seconds and you will see connected
message as shown on your mobile device. (For some Bluetooth
devices, you may need to input “0000” as pairing password)
4. If pairing is successful, A tones will sound from speaker and the
“Mode LED (6)” indicator will slow blinking each 3 ~ 4 seconds once.
5. Now, you can start to music play from the mobile device by it music
player program.
6. Press and hold the “ power (4)” button to turn Off the device when
it is not in use.
Note: for saving battery energy, the Bluetooth Speaker will turn to sleep
mode when no device is in paired in 8 minutes. To restart the device, press
and hold the “ power (4)” button.