BestScope BS-3001 Series User manual
Stereo Microscope
BS-3001, 3002 Series
Instruction Manual
Please read the manual before using the microscope.
Contents:
I, Applications
II, Names of the parts and accessories
III, Major technical parameters
IV, How to use
V, Lamp and fuse replacement
VI, Maintenance and general care of your microscope
VII, Optional accessories
I, Applications:
BS-3001 and BS-3002 series stereo microscope are economical models. They are
widely used in electronics industry, assembling and inspection of precise
instruments and meters, educational experiments, observation and research. It
can be used in the schools, research institutes, factories and families to study the
geology, outside appearance of objects.
II, Names of the parts and accessories:
BS-3001A:
Focusing knob, clamp thumb screw, pole, eyepieces, diopter adjustment ring,
prism housing, objective, clipper, black & white glass stage.
BestScope International Limited
BS-3001B:
Incident illuminator, focusing knob, clamp thumb screw, pole, eyepieces, diopter
adjustment ring, prism housing, objective, power switch, specimen clipper, black &
white glass stage.
BS-3001C:
Power switch, incident illuminator, focusing knob, clamp thumb screw, pole,
eyepiece, diopter adjustment ring, prism housing, objective, power switch,
specimen clipper, frost glass stage, transmitted illuminator.
BS-3002A:
Focusing knob, clamp thumb knob, pole, eyepiece, diopter adjustment ring, prism
housing, objective, specimen clipper, black & white glass stage.
BS-3002B:
Focusing knob, clamp thumb knob, pole, eyepiece, diopter adjustment ring, prism
housing, objective, incident illuminator, power switch, specimen clipper, black &
white glass stage.
BS-3002C:
Power switch, incident illuminator, focusing knob, clamp thumb screw, pole,
eyepiece, diopter adjustment ring, prism housing, objective, power switch,
specimen clipper, frost glass stage, transmitted illuminator.
III, Major technical parameters:
1, Optical parameters (mm)
Field of view: WF10×/20mm
Working distance: 2×, Working distance 80mm
2, electric parameter:
Input voltage: 220V/50Hz or 110V/60Hz (Optional)
Illuminating style:
1) natural light
2) incident light 12V/10W(without transmitted illuminator)
3) halogen light 12V/10W(without transmitted illuminator)
BestScope International Limited
4) incident and transmitted illuminator 12V/10W
5) incident and transmitted halogen illuminator 12V/10W
The above 5 types are optional
3, structure parameter:
Vertical binocular head, Inclined 45 degree binocular head are optional. Diopter
adjustment +/- 5 °, inter-papillary distance adjustable 55-75mm .
4, How to use:
1) environment requirement: Dry and dust-free room temperature
between –5---+40 degrees Celsius.
2) Illuminator control:
Plug in the power cord into the outlet. Refer to the following table for
illumination styles. For microscopes with dimmer control the
brightness of the illuminators can be adjusted.
3) select the stage:
1), The frost glass stage is placed on the base and is fixed with a screw,
it is used when a transparent specimen is being observed, please use
transmitted illuminator.
2) Black and white stage is kept in the packing as an accessory. When it
is used please take off the glass stage and place the black and white
stage on the base. Normally the white side is upward. If the specimen
is white or other bright colors, use the black side to improve the
contrast with only incident illuminator.
4) Placement of specimen:
Place the clean specimen on the center of the stage and fix it with
clippers if necessary.
5) Use of rubber eye-guard: One pair of rubber eye guards is contained in
the packing. They are used to protect against incident light around the
eyepieces to improve the visibility.
6) Focusing, diopter, inter-pupillary adjustments:
Place a specimen onto the stage. Loosen the body locking thumb screw and hold
the microscope head and move the body up and down and fix it at the estimated
working distance. Rotate the zooming knob while looking through the right
eyepiece until you see the image. Using the focusing handles to get the sharpest
image of the specimen. Then look through the left eyepiece with your left eyes
and turn the diopter adjustment ring until you get an image as sharp as the right
BestScope International Limited
side. Make this adjustment without moving the focusing knob. Then grasp the
right and left prism housing and move them closer or farther apart in order to
match your pupil distance. Adjustment is proper when the field of view becomes
comfortable and presents a full single field.
7), Objective power switch
Models of BS-3001A, BS-3001B, BS-3001C, BS-3002A, BS-3002B, BS-3002C
have inserted objectives. When changing the objectives, unscrew the
fixing screws and slide the objective out and put on the new objective
(optional) and slide it in. Fix it with the screw.
V, Lamp and fuse Replacement:
Warning: Always disconnect the power cord when you change the lamp or fuse
and make sure that the lamp is not hot.
1, Replacement of the incident lamp:
Loosen the fixing screw and take off the lamp housing. Replace the bulb with a
same new bulb. Place the lamp housing back and fix it with the same screw.
2, Replacement of the transmitted lamp:
Loosen the fixing screw of the glass stage and take off the glass. Take down the
broken bulb through the stage hole and install a new bulb.
3, Replacement of the fuse:
The fuse case is located at the back side of the base. Unscrew the fuse case
cover and put in a new one.
VI, Maintenance and general care of your microscope:
1, Microscope is a delicate precision instrument and it may be damaged by
dropping and hitting.
2, Do not keep microscope under sun. It should be kept in a dry and clean
environment and avoid heat and strong vibration.
3, To obtain clear image, do not touch lenses with your finger.
4, All lens surface should be kept clean. If the lens gets dusty, blow off the dust
with a rubber syringe. If necessary clean the lenses with a lint free cloth.
5, Do not use any organic material to clean the microscope surface, especially the
plastic surface. It should be cleaned by neutral detergent.
6, Because the assembly of all parts has been done by skilled optical craftsmen at
the factory, you should never attempt disassembly.
BestScope International Limited
7, Apply a little bit grease regularly to the mechanical parts.
8, When not in use always cover the microscope with the dust cover and place it in
a cool and dry place.,
VII, Optional parts:
1, eyepieces: WF5×/20mm, WF15×/15mm, WF20×/10mm
2, Objectives: 1×, 3×, 4×, 6×
3, Ring lamp: The fluorescent lamp is fixed by 3 screws on the outside surface of
objective case. It can be a substitute of traditional incident lamp because it is
evenly lighted and the light is brighter and softer and comfortable to use.
This manual suits for next models
1
Table of contents
Other BestScope Microscope manuals
BestScope
BestScope BS-2053 Series User manual
BestScope
BestScope BS-2081L User manual
BestScope
BestScope BS-3060A User manual
BestScope
BestScope BS-6030 User manual
BestScope
BestScope BS-2040B User manual
BestScope
BestScope BS-2022 Series User manual
BestScope
BestScope BS-2043 Series User manual
BestScope
BestScope BS-2044 Series User manual
BestScope
BestScope BS-3030 Series User manual
BestScope
BestScope BS-2092 User manual
BestScope
BestScope BS-6000B User manual
BestScope
BestScope BS-5070B User manual
BestScope
BestScope BS-2041FB(LED) User manual
BestScope
BestScope BS-2020BD(300) User manual
BestScope
BestScope BS-2010E User manual
BestScope
BestScope BS-2040FB(LED) User manual
BestScope
BestScope BS-2081F User manual
BestScope
BestScope BS-6000A User manual
BestScope
BestScope BS-2080D User manual
BestScope
BestScope BS-2073 Series User manual
Popular Microscope manuals by other brands
VWR
VWR VisiScope 384 Series instruction manual
Nikon
Nikon ECLIPSE E200 POL instructions
Leica
Leica DI C800 User's manual & installation instructions
ThermoFisher Scientific
ThermoFisher Scientific Continuµm manual
ThermoFisher Scientific
ThermoFisher Scientific Continuµm manual
Olympus
Olympus SZ61 instructions