BestScope BS-3040 User manual

User

User Manual

Manual

Stereo

Stereo Microscope

Microscope

BS-3040

This instruction manual is for the microscope BS-3040. (If the model is BS-3040BD, for the

optical part of BS-3040BD, please refer to this manual, for the digital part, please refer to the

manual in the CD.) To insure safety and obtain optimum performance and familiarize

yourself fully with the use of this microscope .We recommend that you read the manual

thoroughly before operating the microscope ,Attain this manual instruction in an easily

accessible place near the microscope for the further reference.

Bestscope

Bestscope International

International

International Limited

Limited

CONTENT

CONTENT BS-3040

BS-3040

CONTENT ………………………………………………………………… 1

Before use ………………………………………………………………… 2

1．NAME OF CONPONTENTS ……………………… ……… ………… 3

2．Assemblage ………………………………… ……… … ………………… 4

2．1 Figure …………………… ……… …………………… …………… 4

2．2 Process ………………………………………………………………… 5

3．Adjustment …………………………… ………………………………… 7

3．1 Binocular head ……………………………………………………… … 7

3．2 Stand …………………………………………………………………… 8

4. Technical parameter …………………………………………………… 9

5．Trouble shooting ……………… ………… …… ……………………… 9

6．Outfit ……………………………………………………………… …… 10

Bestscope

Bestscope International

International

International Limited

Limited

BEFORE

BEFORE USE

USE

USE BS-3040

BS-3040

1．Notice

Notice

1. The microscope is composed of precision components ，Handle with care to prevent

abrupt.

2. Check the input voltage :be sure the input voltage which signed in the back of the

microscope is consistent with the power supply voltage ,or it will bring a serious damage

to the instrumnet .

3. Microscope should be place dry and clean place., Do not expose the microscope in the

sun directly ,Avoiding high temperature and violent vibration.

4. Handle stand with one hand and the base with another hand when moving microscope. 。

5. If the bacterium solution or the water splash to the stage ,objective or viewing tube,pull

out the cord at once ,and wipe up the microscope .Othervise ,the instrumnet will be

damaged

6. The microscope illumination house will get hot when operating. 。Make sure enough

room to disperse heat 。

7. Connect with land to prevent lighting strake. 。

8. Professional people to take the electronic conponents to prevent electricity strake

9. Use the factroy supplied power cord ,pleased

2．Maitenance

Maitenance

1. All lenses had been precisely adjusted and do not take the microscope apart. 。

2. Do not take the Binocular head and focusing system apart 。

3. The instrument should be kept clean ,and prevent pollution while cleaning 。

4. Wipe glass components softly , fingerprints and oil marked on it should be wipe off

with a tissue moistened with a small mount of xylene or a 3:7 mixture of alcohol and

ether

5. Never use the organic solution to clean the other surface, if necessary ,pleased choose

neutral detergent. 。

6. Turn off electricity if microscope is moistured when operating .then wipe it off. 。

7. Do not take any parts of microscope apart, or else effecting microscope function. 。

8. The instrument should be kept in dry place .cover the microscope with the dust cover

after the illumination house temperature come down 。

Bestscope

Bestscope International

International

International Limited

Limited

ZOOM

ZOOM STEREO

STEREO

STEREO MICROSCOPE

MICROSCOPE

MICROSCOPE BS-3040

BS-3040

1．NAME OF CONPONTENTS

BS-3040

BS-3040 ZOOM

ZOOM

ZOOM STEREO

STEREO

STEREO MICROSCOPE

MICROSCOPE

Binocular head

Stand

EW 10X eyepiece

Lock-screw

Glass plate

Base

Focusing knob

cable

Shift knob

swith

Bestscope

Bestscope International

International

International Limited

Limited

2. Assembly

Assembly

Assembly BS-3040

BS-3040

2.1

2.1 Assembly

Assembly

Assembly gragh

gragh

Gragh below indicate the assembly process 。

●Check it is clean before assembling. do not scratch any components and the surface of

glass 。

①

EW10X Eyepiece

③

②

④

Binocular head

Stand

Cable

Bestscope

Bestscope International

International

International Limited

Limited

BS-3040

2.2

2.2 Assembly

Assembly

Assembly process

process

Fig3

④

Fig 1

①

③

②

2.2.1

2.2.1 Assembly

Assembly

Assembly binocular

binocular

binocular head(fig.

head(fig.

head(fig. 1)

Loosen the lock-screw ③of stand ④, put

the binocular head ②into the hole of stand,

tight the lock-screw 。

2.2.2

2.2.2 eyepiece

eyepiece

eyepiece assembly(fig1

assembly(fig1

、

fig2)

Take the dust cover ①apart of binocular

head ②. Insert the 2pcs WF10X eyepiece into

tube. The rubber on the eyepiece prevent extra

light.Take away the rubber when observating

with galsses

Fig 2

⑤

Working condition ：

1．temperature ：0℃ ～ 40 ℃ ，

2．Hot or moisture will damage the

instrument 。

3．Place the instrument in a clear condition.

cover it the instrument when no using 。

4．The microscope should be placed without

vibration

Bestscope

Bestscope International

International

International Limited

Limited

BS-3040

2.2.3Cable

2.2.3Cable connecting

connecting

connecting (fig.4)

(fig.4)

1．Turn to “O”position ⑥before connecting

power ⑦ 。

2．Insert the pin ⑦into microscope plug safely . 。

3．Insert the pin ⑧into the power plug 。

2.2.4

2.2.4 Use

Use

Use the

the

the glass

glass

glass stage(fig.5)

stage(fig.5)

Set the glass stage plate ⑨on the center of

base, clamp the slide with two clips ⑩when

using the plate. 。

●Using LED light illumination 。

●Input ：100V ～240V 。

Fig 4

⑥

⑧

⑦

Fig 5

⑩

⑨

Bestscope

Bestscope International

International

International Limited

Limited

3. Adjustment

Adjustment

Adjustment BS-3040

BS-3040

3.1

3.1 Binocular

Binocular

Binocular head

head

3.1.1

3.1.1 Interpupillary

Interpupillary

Interpupillary adjustment

adjustment

adjustment (fig.5)

(fig.5)

Adjusting Interpupillary after observation

for another one using 。Hold the two tubes,

①adjust interpupillary to obtain a clear

image. 。

3.1.2

3.1.2 doipter

doipter

doipter adjustment(fig.6)

adjustment(fig.6)

1．Turn the doipter adjusting rings ②to the zero

2．Set the sample on the stage 。

3．Turn the zoom adjusting knob ③to the 5X

position, focusing the sample 。

4．Turn the zoom knob ③to 0.8X position.

Observe though the left side eyepiece.

Adjusting the adoipter ring ②to focus

sample. 。then look though the right

eyepiece, adjusting the adoipter ring ②to

focus sample. 。

5．Repeat process3 and process 4 untill the image

was located on focus, the image also the

clear when change the magnification 。

●working distance :115mm,set up the tray if

necessary 。

●operating ：take the lock-screw down by

screwdriver. Driver up the tray ⑤to a higher

lock-screw hole. Tighten it 。

⑤

Fig 5

①

④

screw

②

③

Fig6

Bestscope

Bestscope International

International

International Limited

Limited

BS-3040

3. 2

2 Stand

Stand

Fig 7

②

Fig 9

3.2.1 ．focusing knob adjustment (fig7 、fig8)

1．Pull down the skateboard ②by focusing knob ①

in a low position to prevent the microscope

head drop because of focusing knob loosen 。

2．Hold two side focusing knob ①. Left focusing

knob keep still, turn the right focusing

knob. Move up or down according to the

strength of right focusing knob. 降。

3．Light adjustment: adjust base illumination with

right side knob ③. Adjust Top illumination by

left side knob ④.。

①

③

Fig 8

④

Attention

Attention ：

1．Clean the touch-area after observing

contagious sample 。

2．Take away sample before move microscope 。

3．Hold the stand and the base to prevent

incline during move microscope 。

loose

tight

Bestscope

Bestscope International

International

International Limited

Limited

4．Technical

Technical

Technical parameter

parameter

parameter BS-3040

BS-3040

4.1 Zoom ratio ：6.1 ：1

4.2 Zoom range ：0.8 ×～5×

4.3 Eyepiece ： Φ 22 10 ×Wide field ,interpupillary adjustable

4.4 Binocular head ：incline at 45 ，interpupillary range :52 ～75mm

4.5 Working distance ：115mm

4.6 range of movement ：105mm

4.7 Illumination ：LED lamp illumination

4.8 input ：100-240V ～， 0.15A ，50/60HZ

5 Trouble

Trouble

Trouble shooting

shooting

The function of microscope will no work efficiently for the unfamiliar using. Check the table

below if meet some troubles, then take proper action. Ask sales agent if the trouble will no be

tackled after check. 。

Trouble

Trouble Cause

Cause

Cause Remedy

Remedy

1．Double images Interpupillary distance

is not correct

Readjust it

Diopter adjustment is

not correct

Readjust it

2．Dirt appears in the view

field

Dirt on the specimen Clean specimen

Dirt on the surfaces of

eyepieces

Clean eyepieces

3．Image is not clear Dirt on the surface of

objectives

Clear objectives

4．Image is not clear while

focusing change

Diopter adjustment is

not correct

Readjust diopter

Focusing is not correct Readjust it

5．The focusing knob is not

smooth

The focusing knob is

too tight

Loosen it to a suitable

position

6．The image is obscure

because of the head

slipping down during

observation

The focusing knob is to

o loosen

Tighten it to a suitable

position

Table of contents

Other BestScope Microscope manuals

BestScope

BestScope BS-3035 Series User manual

BestScope

BestScope BS-3030 Series User manual

BestScope

BestScope BLM2-241 User manual

BestScope

BestScope BS-2070 User manual

BestScope

BestScope BS-2030MH4B User manual

BestScope

BestScope BS-2093B Series User manual

BestScope

BestScope BLM-210 User manual

BestScope

BestScope BS-7000A User manual

BestScope

BestScope BS-2020BD(300) User manual

BestScope

BestScope BS-2030B User manual

BestScope

BestScope BS-2020B User manual

BestScope

BestScope BS-8060B User manual

BestScope

BestScope BS-7000B User manual

BestScope

BestScope BS-6000B User manual

BestScope

BestScope BLM-205 User manual

BestScope

BestScope BS-2073 Series User manual

BestScope

BestScope BS-3044 User manual

BestScope

BestScope BS-6010R User manual

BestScope

BestScope BS-2094C User manual

BestScope

BestScope BS-2026 Series User manual

BestScope

BestScope BS-6020RF User manual

BestScope

BestScope BS-2080MH6 User manual

BestScope

BestScope BS-5092 Series User manual

BestScope

BestScope BS-5070B User manual

Popular Microscope manuals by other brands

Thermo Scientific

Thermo Scientific Nicolet iN10 Using

National

National DC3-163 instructions

KERN Optics

KERN Optics OPE-1 User instructions

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Operation manual

Prior

Prior Lux POL operating instructions

Opitec

Opitec Smartscoop 115615 instructions

KERN

KERN OPO-1 operating instructions

Topcon

Topcon SP-1P user manual

Motic

Motic PA43 Operation manual

Leica

Leica DVM5000 Setup manual

MshOt

MshOt MZ62 user manual

KERN Optics

KERN Optics OZR-5 User instructions

VWR

VWR VisiScope 384 Series instruction manual

Nikon

Nikon ECLIPSE E200 POL instructions

Leica

Leica DI C800 User's manual & installation instructions

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

Olympus

Olympus SZ61 instructions