Bernafon PRIO User manual
PRIO
Behind-the-ear hearing instruments
INSTRUCTIONS
FOR USE
Summary
Operating Instructions for
BTE (Behind-the-Ear) Hearing Instruments
Features 3
Inserting/Removing Instrument with Earmold 5
Inserting/Removing Instrument 8
with SPIRA flex tube
ON/OFF 11
Volume Control 12
Volume Control Indicator 13
Push Button 13
Telecoil 14
Battery Indicator 16
Battery Replacement 17
Battery Information 18
FM and Direct Audio Input shoe 20
Tracker 22
Safety Guidelines 23
International Warranty 25
Push Button Configuration 27
2
The following hearing instruments are
covered in these operating instructions:
PRIO 112 VC PRIO 105 DM VC PRIO 105 DM
Congratulations on the purchase of your new hearing
instruments. These advanced devices are fully digital,
and have been adjusted by your hearing care
professional with the aid of a computer and specially
developed software.
Please follow these instructions when using and caring
for your new hearing instruments. These guidelines
will help you to achieve the best possible results from
your instruments and to once again enjoy the sounds
of life … your family, friends and environment.
Important
Please read the entire content of these instructions
as well as the attached “Guide for Better Hearing”
before using your hearing instruments.
3
Description of features
With Earmold
1 Canal
2 Sound outlet
3 Tubing
4 Helix
5 Vent
PRIO 105 DM VC
1 Push button
2 Microphone
2a
Second microphone
(105 styles only)
3 Earhook
4 Sound outlet
towards earmold
5 Battery drawer
6 Direct Audio Input
7 Programming port
8 Volume Control
(PRIO 105 DM VC and
PRIO 112 VC)
3
4
5
1
23
1
4
3
2
5
6/7
2a
8
44
6/7
1
5
8
2a 3
2
9
10
1 Push button
2 Microphone
2a Second microphone
(105 styles only)
3 SPIRA flex Sound Tube
4 Sound outlet
5 Battery drawer
6 Direct Audio Input
7 Programming port
8 Volume Control
(PRIO 105 DM VC and
PRIO 112 VC)
9 Concha Clip
10 Dome
Description of features with SPIRA flex Sound Tube
4
Inserting your hearing instrument with an earmold
Inserting your earmold correctly, takes practice,
patience and perseverance. If you are having difficulty
inserting your earmolds, please consult your hearing
care professional.
Insert your earmold first, then position the hearing ins-
trument over your ear.
• Grasptheearmoldtubing
between your thumb and
index finger. The thumb
should be just behind the
tubing where it enters the earmold.
The top part of the earmold needs
to be pointing straight up. The canal
part of the earmold should be pointing
towards the ear canal entrance.
• Ifyouhavedifficultyinsertingthe
earmold, pull the ear lobe down with
the other hand, or pull the top of the
ear back and up.
5
•
Lift the earmold up to your ear.
Push the canal part
of the earmold into the ear canal opening twisting
slightly to ease the helix portion into position. The
helix part should be pointing straight up and should
slip into position.
• Ifyourearisbecomingsorefromtryingtoinsert
the earmold, spread a small amount of Vaseline
around the outer edges of the earmold to help it
slip into position easily. Be careful not to get any
Vaseline into the sound outlet.
If your ear remains
sore please
consult your hearing care professional.
Look in a mirror. If the helix part of the earmold is
visible, it is not inserted correctly.
Run your index finger down the skin just in front of
your ear. If you can touch the helix part of the earmold,
it is not inserted correctly. Use your index finger to
push the helix part of your earmold back behind the
flap of skin. It may help to gently pull this flap of skin
forward with the other hand at the same time.
Helix
6
77
To position the hearing instrument
• Oncetheearmoldisinsertedcorrectly,
lift the hearing instrument up and
position it behind the ear. Take care
not to twist the tubing of the hearing
instrument.
Removing your earmold and hearing instrument
• Liftthehearinginstrumentupandoverfrombehind
the ear.
• Pushthebackofyourearwithyourthumbto
loosen the helix part of the earmold, then use your
index finger to remove it.
• Graspthehelixpartandtwistitforward.
• Gentlypulltheearmoldstraightoutoftheear,
holding on to the helix part of the mold.
Important
Do not take the earmold out of the ear by pulling the
hearing instrument. This might disconnect the instru-
ment from the earmold or damage the tubing.
8
Inserting your hearing instrument with a SPIRA flex
Sound Tube
Inserting your SPIRA flex Sound Tube correctly every
time, takes practice, patience and
perseverance.
• Lift the hearing instrument up
and position it behind your ear.
• Grasp the bend of the tube
between your thumb and index
finger. The dome should be
pointing towards the ear-canal
opening. Gently push the dome
into your ear-canal until the
sound tube sits flush against
the side of your head.
• Position the concha clip into
the indentation above your ear
lobe using your index finger.
Look in a mirror. If the sound tube is
sticking out from your ear, the dome
has not been placed correctly in the
ear canal. If the concha clip is visibly sticking out
from your ear, it has not been positioned correctly.
Table of contents
Other Bernafon Hearing Aid manuals
Bernafon
Bernafon Viron Series User manual
Bernafon
Bernafon Power BTE Assembly instructions
Bernafon
Bernafon Nevara User manual
Bernafon
Bernafon Win 302 Troubleshooting guide
Bernafon
Bernafon ACRIVA 9 Operating instructions
Bernafon
Bernafon VERAS 9 User manual
Bernafon
Bernafon Viron Series User manual
Bernafon
Bernafon VERAS 9 Assembly instructions
Bernafon
Bernafon VERITE 7 Assembly instructions
Bernafon
Bernafon Acriva Assembly instructions
Bernafon
Bernafon Nano RITE Assembly instructions
Bernafon
Bernafon Nevara User manual
Bernafon
Bernafon ACRIVA 9 User manual
Bernafon
Bernafon Nevara User manual
Bernafon
Bernafon Juna 9 Pico RITE Dimensions
Bernafon
Bernafon SOUNDGATE User manual
Bernafon
Bernafon VERITE 9 User manual
Bernafon
Bernafon Nevara User manual
Bernafon
Bernafon Saphira User manual
Bernafon
Bernafon HEARTOO 120 I User manual
