Belkin F1DK102U - KVM Switch With Cabling User manual
Belkin Tech Support
US: 310-898-1100, ext. 2263
800-223-5546, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 800 616 1790
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
© 2007 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed. Mac and Mac OS are trademarks of Apple
Inc., registered in the U.S. and other countries. Windows and Windows Vista are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
P74463-B
KVM Switch
User Guide F1DK102U
KVM Switch
1
Package Contents
• 2-Port KVM Switch with Cabling (USB)
• Switching Software CD
• User Guide
Introduction
Congratulations and thank you for purchasing the Belkin 2-Port KVM
Switch with Cabling. The Switch is easy to set up and use, and comes
with everything you need to share one monitor, keyboard, and mouse
between your two computers. No additional cables are required.
The diagram below shows a typical KVM Switch setup. Your monitor,
keyboard, and mouse connect to the Switch. The Switch is connected
to your two computers using the included cables.
Package Contents/Introduction
2
System Requirements
Monitor
The Switch supports LCD and CRT monitors with VGA connections.
You can also use your DVI-I monitor with the Switch by connecting a
VGA adapter to the DVI cable. The Switch does not support direct DVI
connections from monitors.
Keyboard/Mouse
The Switch fully supports any PC or Mac® keyboard and mouse with a
USB connection, including all special-function keys.
Computers
The Switch can be used with desktop or notebook computers that
support USB keyboard and mouse connections, and that run on one
of these operating systems:
• Windows® 2000, XP, 2003, or VistaTM
• Mac OS® X v10.3 and above
• Linux®
System Requirements
USB connection
VGA connection
3
Installing your Switch
Before you begin, make sure that your USB keyboard and mouse
work properly with both computers, and that both computers are
powered on.
1. Connect your monitor, keyboard, and mouse to your first computer.
2. Insert the included software CD into your first computer, and
double-click on the “KVM” file. A small icon of the Switch will
appear in the lower-right corner of your screen.
3. Connect your monitor, keyboard, and mouse to your
second computer.
4. Insert the software CD into your second
computer and double-click on the “KVM” file.
5. Make sure both computers are still powered on.
6. Connect your monitor, keyboard, and mouse to the Switch.
Installing your Switch
4
7. Connect one set of cables to the monitor and USB ports on your
first computer. Wait for your computer to recognize the new USB
device (the Switch). Then connect the other set of cables to the
monitor and USB ports on your second computer.
You are now ready to use your Switch.
Installing your Switch
5
Using your Switch
When you power up your computers, your first computer’s desktop will
appear on your monitor. You are now ready to use that computer as if
it were directly connected to your monitor, keyboard, and mouse. You
can switch access to your other computer using a desktop icon or a
keyboard hot-key sequence.
Windows users:
To switch computers using the desktop icon, right-click on the
icon in the taskbar in the lower-right corner of your screen and select
“Switch All”.
To enable hot keys for your computers, right-click on the icon
in the taskbar, select “Options”, and then select “Enable Hotkey
Switching”. To switch computers using hot keys, press the “Ctrl”
button on your keyboard twice in rapid succession. This is the default
hot-key sequence. To change the hot-key sequence, right-click on the
icon, select “Options”, and then choose a new switching key.
Mac OS users:
To switch computers using the desktop icon, click once on the
icon in the menu bar in the upper-right corner of your screen and
select “Switch All”.
To enable hot keys for your computers, click on the icon in
the menu bar, select “Options”, and then select “Enable Hotkey
Switching”. To switch computers using hot keys, press the “Ctrl”
button on your keyboard twice in rapid succession. This is the default
hot-key sequence. To change the hot-key sequence, click on the
icon, select “Options”, and then choose a new switching key.
Using your Switch
6
FAQs
What operating systems does the Switch support?
The Switch supports Windows 2000, XP, 2003, and Vista; Mac OS X
v10.3 and higher; and Linux.
What type of mice and keyboards does the Switch support?
The Switch provides full enumeration of USB peripherals, allowing
it to support all USB-based keyboards and mice, including all
special-function keys.
What is the maximum video resolution the Switch supports?
The advanced video circuit in the Switch supports a maximum
resolution of 2048x1536@65Hz.
Can I use my DVI-I monitor with the Switch?
Yes, you can use a DVI-I monitor with the Switch by attaching a VGA
adapter to the monitor’s DVI connector.
Does the Switch allow me to transfer files from one computer
to another?
No, the Switch allows you to share peripherals between computers
(monitor, keyboard, and mouse). To share or transfer files between
computers, you will need a networking switch.
Does the Switch require an AC adapter?
No, no additional power supply is required for the Switch to
function properly.
FAQs
7
Troubleshooting
Monitor Support
I am getting ghosting, shadowing, or fuzzy images on my monitor.
• Check that all video cables are inserted properly.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Check that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
• Connect the monitor directly into the computer with which you are
having trouble to see if the problem still appears.
I am getting a black screen on my monitor.
• Check that all video cables are inserted properly.
• Connect your monitor directly to the computer to verify that your
monitor is functioning properly.
• Take your computer off standby mode.
• Check that the power supply is properly connected.
Keyboard Support
My computer does not detect my keyboard and I get a keyboard
error reported at boot up.
• Check that your keyboard cable is connected properly to the Switch.
Tighten any loose connections.
Troubleshooting
Table of contents
Other Belkin Switch manuals
Belkin
Belkin F1DK102PEA User manual
Belkin
Belkin P73371-F5U524-G User manual
Belkin
Belkin Wireless Gplus Notebook Card User manual
Belkin
Belkin F1DK102Uea User manual
Belkin
Belkin OmniView F1DB102P2 User manual
Belkin
Belkin F1DS102U - OmniView SOHO Series 2 Port KVM... User manual
Belkin
Belkin OmniView Dual-User PRO3 User manual
Belkin
Belkin F5L009 - Network USB Hub User manual
Belkin
Belkin Switch2 DVI-D User manual
Belkin
Belkin Secure DVI-I User manual
Belkin
Belkin OmniView F1DK102P User manual
Belkin
Belkin BITRONICS P72655 User manual
Belkin
Belkin F5U221 User manual
Belkin
Belkin OmniView Dual-User PRO3 User manual
Belkin
Belkin OmniView F1DP108Gea User manual
Belkin
Belkin P75470ea User manual
Belkin
Belkin OmniView F1D074 User manual
Belkin
Belkin OmniView F1DS102P User manual
Belkin
Belkin F1U109 User manual
Belkin
Belkin F1DP108A - OmniView SMB CAT5 KVM Switch Quick start guide
