Belkin F5U116 User manual
P73277 F5U116
USB Multi-port
Hub
User Manual
Thank you for purchasing the Belkin Components F5U116
Multi-port Hub. This product provides you with the
following ports:
• Four downstream USB ports
• One parallel printer port
• Two RS-232 serial ports
USB has a simple and high-speed interface which makes
adding serial devices and parallel printers almost trivial. No
need to worry about addresses, IRQs, internal cards, slots, or
anything complicated. Just plug it in, install the drivers, and
you’re ready to go.
• Belkin Multi-port Hub
• 6VDC, 2.5A power supply
• USB Device Cable
• Installation CD
• This manual
• Registration card
Introduction
Package Contents
1
Please read this manual thoroughly in its entirety.
Failure to follow installation and other recommended
procedures may result in irreversible damage to the
product, your computer and/or connected devices.
Product Detail
2
• PC with one free USB port
• Windows®98/98 Second Edition (SE)
• CD-ROM drive
System Requirements
Hardware Installation
3
Because USB is hot swappable, you need not power down
your PC.
• Connect the jack of the power adapter and plug it into the
back of the Multi-port Hub
• Find an unused electrical outlet, and plug in the power adapter
• Plug the flat end (A plug) of the USB cable into a free USB
port on your PC
• Plug the square end (B plug) of the USB cable into the USB
upstream connector located on the back of the Multi-port Hub
Windows®will automatically detect the Multi-port Hub and start
installing its drivers. Windows will prompt you for the software.
See the next sections for details on how to install the software.
Before you can install the software, you need to know what
version of Windows®you are using. If you are not sure what
version of Windows®you are running, click on START, select
SETTINGS, click on CONTROL PANEL, then double-click on
SYSTEM. An applet will appear and provide you with your
system’s information.
Software Installation
4
Software Installation – Windows® 98 and Windows®98
Second Edition (SE)
First, Windows®will automatically detect and install the built-in
"General Purpose USB Hub" for the four downstream USB
ports. You do not need to do anything.
Next, Windows®will detect the two serial ports named
"USB-232 Adapter". You see the following dialog box:
Click on Next.
Software Installation (continued)
5
At the next prompt, click on Next again so that Windows®
searches for the best driver (recommended):
You must then tell Windows®where to get the drivers. Insert
the CD-ROM in your CD-ROM drive, and click on “Specify a
location”. In the space provided, type “d:\serial\win98” (or
substitute “d:” with the correct drive letter of your CD-ROM
drive). Click on Next.
Software Installation (continued)
6
Windows®will read the CD-ROM and find the correct drivers.
Click on Next.
Once Windows®has finished copying the drivers, installation for
the first serial port is complete. Click on Finish:
Windows®may prompt you to restart your computer. Because
installation is not yet complete, click No.
Software Installation (continued)
7
Windows®will continue, and will detect and install the drivers
for the second serial port. Then, Windows®98 will find an
“Unknown Device”. Windows®98 SE will find this device as a
“USB Device”. Click on Next.
At the next prompt, click on Next again so that Windows®
searches for the best driver (recommended):
Software Installation (continued)
8
You must then tell Windows®where to get the drivers. Make
sure the Installation CD is in your CD-ROM drive, and click on
“Specify a location”. In the space provided, type in
“d:\parallel\win98” (or substitute “d:” with the correct drive
letter of your CD-ROM drive). Click on Next.
Windows®will read the CD-ROM and find the correct drivers.
Click on Next.
Other manuals for F5U116
2
Table of contents
Other Belkin Switch manuals
Belkin
Belkin OmniView PRO3 PS/2 User manual
Belkin
Belkin F5D5130-F1 User manual
Belkin
Belkin F1DE101H User manual
Belkin
Belkin F1DN102F-3 User manual
Belkin
Belkin OmniView Secure F1DN104U User manual
Belkin
Belkin OmniView F1DJ102P-B User manual
Belkin
Belkin OmniView Professional Series User manual
Belkin
Belkin F1D201u User manual
Belkin
Belkin F1U400 - 4x4 USB Peripheral Switch Sharing User manual
Belkin
Belkin OMNIVIEW PM00019 -F1DP2XXA User manual
Belkin
Belkin Bitronics F1U127-KIT User manual
Belkin
Belkin THUMB HUB F5U218-MOB User manual
Belkin
Belkin OMNIVIEW F1DN102D User manual
Belkin
Belkin F1D201 User manual
Belkin
Belkin Wemo F7C030 User instructions
Belkin
Belkin F5U021 Installation guide
Belkin
Belkin F5U231 User manual
Belkin
Belkin F1DN102MOD-HH-4 User manual
Belkin
Belkin F5D5131-16 - 10/100 Switch User manual
Belkin
Belkin P73957EH User manual
