Belkin F5D6050 User manual

Wireless USB Adapter F5D6050

User’smanual

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Knowing Your Wireless USB Network Adapter . . . . . . . . . . . . . . . . . . 3

Placing the Wireless USB Network Adapter . . . . . . . . . . . . . . . . . . . . 4

Connecting to Your Wireless Network . . . . . . . . . . . . . . . . . . . . . . . 8

Uninstalling the Software and Drivers . . . . . . . . . . . . . . . . . . . . . . . 9

Using the Belkin Wireless LAN Monitor Utility . . . . . . . . . . . . . . . . 10

The Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

The Statistics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

The Site Survey Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

The Encryption Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

The Advanced Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Using Profile Manager Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Operating in Ad-Hoc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

INTRODUCTION

Thank you for purchasing the Belkin Wireless USB Network Adapter

(the

Adapter). Now you can take advantage of this great new technology and

gain

the freedom you need around the home or office without using cables.

The

Wireless USB Network Adapter works like a conventional network

adapter, but

without the wires. The easy installation and setup will have you

networking

wirelessly in minutes. Please be sure to read through this manual

completely to

be sure that you are getting the most out of your Wireless USB Network

Adapter.

Features:

The Adapter complies with the IEEE 802.11b standard in order to

communicate

with other 802.11b-compliant wireless devices.

• 2.4GHz ISM (Industrial, Science, and Medical) band operation

• Integrated, easy-to-use profile manager for storing multiple wireless

network settings for work, school, home, or any other setup

• Wireless interface compliance with the IEEE 802.11b standard

• USB interface, for Plug-and-Play installation and convenience

• 64- or 128-bit Wireless (WEP) Encryption

• Wireless access to networked resources

• Support for both infrastructure and ad-hoc (peer-to-peer) networking

modes

• Data rate of up to 11Mbps

• Supports 11, 5.5, 2 or 1Mbps rates (auto-rollback)

• Easy installation and use

• External antennas

• LED link indicator

Applications and Advantages

• Wireless roaming with a laptop around the home or office

Offers the freedom of networking—without cables.

• Difficult-to-wire environments

Enables networking in buildings with solid or finished walls, or open

areas

where wiring is difficult to install.

• Frequently changing environments

Adapts easily in offices or environments that frequently rearrange or

change locations.

INTRODUCTION

• Temporary LANs for special projects or peak time

Sets up temporary networks such as at trade shows, exhibitions, and

constructions sites, which need networks on a short-term basis; also

companies who need additional workstations for a peak activity period.

• SOHO (Small Office/Home Office) networking needs

Provides the easy and quick small network installation SOHO users

need.

Product Specifications

Host Interface: USB 1.1

Power Consumption: 300mA (max)

Certification: FCC Class B, CE Mark, C-Tick

Operating Temperature: 32–131° F (0–55° C)

Storage Temperature: -13–158° F (-25–70° C)

Typical Operating Range: Indoor: 160' (50m) @ 11Mbps, 260' (80m)

@ 5.5Mbps or lower

Outdoor: 490' (150m) @ 11Mbps, up to 1800'

(550m) @ 5.5Mbps or lower

System Requirements

• PC with one available USB port

• Windows® 98, 2000, Me, or XP

Package Contents

• Belkin Wireless USB Network Adapter

• Quick Installation Guide

• Installation Software CD

• User Manual

KNOWING YOUR WIRELESS USB NETWORK

ADAPTER

Status Light

Indicates network

activity and power

Adjustable

Antenna

PLACING THE WIRELESS USB NETWORK

ADAPTER

The best location for your adapter is on top of your computer’s monitor.

Placing

the Adapter on your desktop is acceptable, however, avoid placing the

Adapter

near metal objects such as a computer case or speakers. Any object

that is metal

has the ability to block the radio signals from the Adapter.

Installing and Setting Up the Adapter

Installing your Adapter is done in three easy steps:

1. Install the software FIRST. If you connect your Adapter to your PC

before

you install the software, it will not work until you install the software.

2. Connect the Adapter to your PC.

3. Let Windows finish installing the Adapter.

NOTE: INSTALL THE SOFTWARE FIRST BEFORE YOU CONNECT

THE ADAPTER TO

YOUR COMPUTER

Software and Driver Installation

1. Insert the CD into your CD-ROM drive.

2. The Belkin Wireless USB Network Adapter Setup Utility screen will

automatically appear. If it does not appear within 15–20 seconds, then

select your CD-ROM drive and double-click on the folder named “Files”.

double-click on the icon named “USB_UTILITY.exe”.

3. In the menu window,

drag your mouse over

the “Install” button

then select “Click here”

to start the software

installation program.

PLACING THE WIRELESS USB NETWORK

ADAPTER

4. The installer will start. Click on or select “Easy” to continue to the next

step.

If you are using Windows XP, it is recommended that you use the Belkin

Wireless USB Network Adapter Utility to manage the Adapter’s wireless

settings. If you want to

use Windows XP to manage

the Adapter, check “Use

the Windows XP Wireless

Network Connection

Utility”. Instructions on

how to use the Windows

XP Connection Utility are

available from Microsoft.

Click “Next” to continue.

5. After the software installation is

finished, the message “You can

plug in your WLAN adapter now”

will appear. Plug the Adapter to

an available USB port on your PC

or USB hub.

6. After connecting your Adapter,

Windows will detect that new

hardware has been installed.

Depending on your version of

Windows, a window similar to

the one pictured here will

appear. Select the option

“Install the software

automatically (Recommended)”.

PLACING THE WIRELESS USB NETWORK

ADAPTER

7. If you are using Windows 2000 or

Windows XP, you may see a screen

similar to this one. This does not

mean there is a problem. Select

“Continue Anyway”.

8. If you are using Windows 98

or Me, you will be asked to

restart your computer. Select

“Restart”. If you are using

Windows 2000 or XP, you will

see a window similar to this

one. Click “Finish”.

PLACING THE WIRELESS USB NETWORK

ADAPTER

9. When the installation is complete, the Belkin WLAN Monitor icon will

be on

your desktop. To open the Monitor Utility, double-click on this icon.

10. A small icon in your system tray (bottom right corner of most

screens) will

appear. This is your shortcut to the Belkin WLAN Monitor. It also

indicates

the status of your connection:

Red: No connection to a wireless network

Blue: Connected to a wireless network.

If you already have a wireless router or an access point in your home or

office, the Adapter will automatically attempt to connect to your wireless

network. In most cases, the Adapter will be able to connect to your

network

automatically. If you are using encryption, you will have to set the

encryption settings on your wireless router or access point before the

Adapter can successfully connect to your wireless network. For

information

about configuring your Adapter, see the next section in this manual.

CONNECTING TO YOUR WIRELESS NETWORK

If you already have a wireless router or an access point in your home or

office,

the Adapter will automatically attempt to connect to your wireless

network. In

most cases, the Adapter will be able to connect to your network

automatically. If

your wireless network is using encryption, you will need to set the

encryption

settings of your Adapter to match that of your wireless network. For

information

about configuring your Adapter, see the next section in this manual.

UNINSTALLING THE SOFTWARE AND DRIVERS

If you need to remove the software and drivers for any reason, you can

easily

accomplish this in one of two ways. You can insert the software CD and

click on

the “Uninstall” option in the menu, or you can go to the Windows Control

Panel

and select the “Add/Remove Programs” option. The Belkin wizard will

walk you

through the removal process.

When you launch the Wireless LAN Monitor Utility (the Utility), you will

presented with the screen below. The following small icon will also be

present in

your system tray.

The Utility can be set to always be on top of everything else

on your desktop when it is open. This setting can be changed

if you right-click on the icon in your system tray.

Place a check mark next to “Always on top” to keep the

utility on top all of the time. Remove the check mark to set

the window to move to the back when you select another window. You

can close

the Utility screen without shutting the Utility down by clicking Exit (l).

Double-clicking on the icon in the system tray will open the window.

The Status Tab

USING THE BELKIN WIRELESS LAN MONITOR

UTILITY

USING THE BELKIN WIRELESS LAN MONITOR

UTILITY

(a) Profile Name

The first thing you will notice is the “Profile Name”. Initially this will say

“default” and be grayed out until you have set up a profile. Also, the

Profile

Manager Mode (k) will be “OFF”. Using Profiles allows you to save

configurations

for different wireless networks. For instance, if you use your Adapter at

your

place of work and also at your home, your wireless network settings

may be

different for each location. Profiles let you store settings for each

location and

name them for easy identification. The “default” profile will contain the

initial

configuration setting when you install the Adapter. To learn how to use

Profiles,

see the section of this manual called “Using Profile Manager Mode”.

(b) Operating Mode

Shows the current wireless mode the Adapter is operating in. There are

two

operating modes: “Infrastructure” and “802.11 Ad-Hoc”. Infrastructure is

the

most common mode to operate in and is the factory default setting. Use

Infrastructure mode when connecting your PC to a wireless access

point or to a

wireless router. Ad-Hoc mode is used to connect two or more

computers together

without the use of an access point or wireless router. To change the

mode, click

the down-facing arrow next to the Operating Mode field. Select the

mode you

wish to use, then click “Apply”.

Shows the current channel the Adapter is operating on. When operating

Infrastructure mode, the channel is set automatically by the access point

wireless router that the Adapter is connected to. You cannot change the

channels in Infrastructure mode. In Ad-Hoc mode, the channel can be

set

manually. For more information about operating in Ad-Hoc mode, see

“Operating

in Ad-Hoc Mode”.

(d) SSID

The SSID is the wireless network name. This field shows the current

SSID with

which the Adapter is associated. The default (factory) setting is “ANY”,

which

will cause the Adapter to automatically look for any wireless network in

the area.

To connect to a specific wireless network, you can manually enter the

SSID of

the known wireless network. Note that the SSID is case-sensitive, so,

capital

letters do make a difference. To change the SSID, click in the SSID field,

type the

SSID you want, then click “Apply”.

USING THE BELKIN WIRELESS LAN MONITOR

UTILITY

(e) Tx Rate

Displays the current rate of data transmission. There are five Tx rates

possible:

Fixed 11Mbps—Always transmit and receive at 11Mbps data rate

regardless of

signal quality.

Fixed 5.5Mbps—Always transmit and receive at 5.5Mbps data rate

regardless of

signal quality.

Fixed 2Mbps—Always transmit and receive at 2Mbps data rate

regardless of

signal quality.

Fixed 1Mbps—Always transmit and receive at 1Mbps data rate

regardless of

signal quality.

Auto—Adjust speed according to signal strength. This mode is the

recommended

setting. It will decrease the amount of transmit and receive errors by

reducing

the speed of transmission in favor of receiving error-free data. Note that

data

being sent at Fixed 11Mbps with low signal quality will not necessarily

get the

data to the computer faster. This is because when errors occur, the data

must be

resent. When the signal quality is low, the chances for errors to occur at

high

speeds are greatly increased. Sending the data at lower speeds when

the signal

quality is poor will reduce the chances of errors, and thus data will get to

the

computer in the shortest possible time.

(f) MAC Address

Other manuals for F5D6050

Table of contents

Other Belkin Adapter manuals

Belkin

Belkin F5U116 User manual

Belkin

Belkin POWERLINE AV User manual

Belkin

Belkin F8E449 User manual

Belkin

Belkin F5U003-MAC User manual

Belkin

Belkin F5U513 User manual

Belkin

Belkin BASIC F7D1101 User manual

Belkin

Belkin F5D4081 v1_8820ea00632 User manual

Belkin

Belkin F5U022 User manual

Belkin

Belkin Bluetooth USB Adapter F8T013 User manual

Belkin

Belkin BASIC F7D1101 User manual

Belkin

Belkin Headphone Adapter User manual

Belkin

Belkin F5U002 User manual

Belkin

Belkin F8T001 Instruction Manual

Belkin

Belkin F9L1106V2 User manual

Belkin

Belkin F5D7050 User manual

Belkin

Belkin F9L1101 User manual

Belkin

Belkin F8T003 User manual

Belkin

Belkin F9L1106 User manual

Belkin

Belkin F5D4075 - Powerline AV+ Starter User manual

Belkin

Belkin F5U109 User manual

Belkin

Belkin F5D8053 User manual

Belkin

Belkin F5U103 User manual

Belkin

Belkin F5L010 User manual

Belkin

Belkin F5D8073 User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide