Barco CLM W6 User manual

CLM W6/HD6

Service Manual

Barco nv Events

Noordlaan 5, B-8520 Kuurne

Phone: +32 56.36.89.70

Fax: +32 56.36.88.24

E-mail: [email protected]

Visit us at the web: www.barco.com

This manual applies to Barco CLM W6/CLM HD6 projection system. The manual helps you

to get a brief description of basic technical information in service and maintain the product.

Your customers will be appreciate the quick response time when you immediately identify

problems that occur with our products. We expect your customers will be appreciate the

service that you offer them.

This manual is for technicians and people who have an electronic background. Please

send the product back to the distributor for repairing and do not attempt to do anything

which is complex or is not mentioned in the troubleshooting.

Notice:

The information found in this manual is subject to change without prior notice. Any

subsequent changes made to the data herein will be incorporated in future edition.

CLM W6/CLM HD6 Service Manual

Manual Version 3.0

Preface

CLM W6/CLM HD6 Jan 31, 2012 I

Table of Content

Chapter 1 Introduction

Highlight 1-1

System block diagram 1-4

Main board connection diagram 1-5

Chapter 2 Disassembly Process

Equipment Needed & Product Overview 2-1

Disassemble Projector Lens 2-2

Disassemble I/O COVER 2-3

Disassemble Main Board Module 2-5

Disassemble Lamp Module 2-8

Disassemble Color Wheel Module 2-10

Disassemble Front Cover Module 2-12

Disassemble Front Cover Shielding 2-14

Disassemble Top Cover 2-15

Disassemble Top Cover Shielding 2-15

Disassemble Keypad Board Module 2-16

Disassemble Connector Board 2-18

Disassemble Right Lamp Driver 2-22

Disassemble Dual lamp blower module 2-25

Disassemble Front dual lamp blower module 2-28

Disassemble ROD and DA blower module 2-30

Disassemble Blower Bracket 2-31

Disassemble Engine Module 2-32

Disassemble Fan (70*20) 2-42

Disassemble LVPS Module 2-45

II CLM W6/CLM HD6 Jan 31, 2012

Table of Content

Disassemble Left Lamp Driver 2-45

Disassemble Fan Module (120X120X25 mm) 2-48

Disassemble Fan Module (105X32 mm) 2-49

Disassemble Blower Module (60X25 mm) 2-51

Disassemble Right Air Vent 2-52

Disassemble Left Air Vent 2-52

Disassemble Bottom Cover Module 2-53

Rod Adjustment 2-56

Chapter 3 Troubleshooting

LED Lighting Message 3-1

Equipment Needed 3-3

Main Procedure 3-4

Power Troubleshooting 3-5

Image Performance Troubleshooting 3-7

Remote Control Troubleshooting 3-11

Network Troubleshooting 3-12

Chapter 4 Function Test & Alignment Procedure

Test Equipment Needed 4-1

Service Mode and Hidden Menu 4-1

OSD Reset 4-2

Reset Lamp Hour 4-2

Test Condition 4-3

CLM W6/CLM HD6 Jan 31, 2012 III

Table of Content

Test Inspection Procedure 4-5

PC Mode 4-6

Calibration 4-9

Video Performance 4-11

Keystone Test 4-12

PIP Function Test 4-13

Network Function Test 4-13

Others 4-17

Chapter 5 Firmware Upgrade

Section 1: System Firmware Upgrade

Equipment Needed 5-1

Firmware Upgrade Procedure 5-2

Section 2: Network Firmware Upgrade Procedure

Equipment Needed 5-6

Read Projector IP 5-7

Network Setting 5-8

PC Hardware Link 5-9

Section 3: Re-write Serial Number

Equipment Needed 5-11

Re-write Serial Number Procedure 5-12

Appendix A Exploded Image I

Appendix B (S/N Denition) I

1-1

CLM W6_CLM HD6 Jan 31, 2012

Chapter 1 Introduction

1. Introduction

1-1 Highlight

No Item Description

1 Dimensions (L x W x H) • 550 x 436 x 236 (mm)

2 Weight • < 25 Kg

3 Power Supply Meets Japanese power distribution requirements:

Mains voltage range: 100V-240V (+/- 10%)

Mains frequency range: 50Hz/60Hz

4 Keystone correction • +/-30 degree

5 Brightness

Brightness with Different Optional Lens:

• WT91-Wide: Typical 6000 lm

• WT91-Tele: Typical 5344 lmTypical 5344 lm

• WT93-Wide: Typical 5648 lm: Typical 5648 lm

• WT93-Tele: Typical 52�1 lm: Typical 52�1 lm

• WT96-Fixed:Typical 5896 lm:Typical 5896 lm

• WT95-Wide: Typical 5�06 lm: Typical 5�06 lm

• WT95-Tele: Typical 3926 lm: Typical 3926 lm

• WT94-Wide: Typical 5404 lm: Typical 5404 lm

• WT94-Tele: Typical 3812 lm: Typical 3812 lm

6 Throw ratio

• For CLM W6:

WT96 (Fixed Lens) ≈ 0.81

WT93 (Wide Zoom) ≈ 1.27-1.52

WT91 (Standard lens) ≈ 1.52-2.03

WT95 (Standard Zoom) ≈ 2.03-3.85

WT94 (Long Zoom) ≈ 3.85-7.32

• For CLM HD6:

WT96 (Fixed Lens) ≈ 0.77

WT93 (Wide Zoom) ≈ 1.2-1.45

WT91 (Standard lens) ≈ 1.45-1.94

WT95 (Standard Zoom) ≈ 1.94-3.67

WT94 (Long Zoom) ≈ 3.67-6.98

1-2 CLM W6_CLM HD6 Jan 31, 2012

Chapter 1 Introduction

No Item Description

� Projection lens

• Standard lens (WT91) ≈ 1.45-1.94 (WUXGA),

1.52-2.03 (WXGA), Zoom Ratio : 1.33X

• Fixed Lens (WT96) ≈ 0.77 (WUXGA), 0.81 (WXGA)

• Wide Zoom (WT93) ≈ 1.20-1.45 (WUXGA),

1.27-1.52 (WXGA), Zoom Ratio : 1.2X

• Standard Zoom (WT95) ≈ 2.0-3.80 (WUXGA),

2.03-3.85 (WXGA), Zoom Ratio : 1.9X

• Long Zoom (WT94) ≈ 3.67-6.98 (WUXGA),

3.85-7.32 (WXGA), Zoom Ratio : 1.9X

8 Lamp life • Total hours needed to decrease the lumens of the test

sample’s median lamp to 50% of original value:

1500 (Normal), 2000(ECO)

9Terminal

• Computer In x2, VESA (HD15) Blue, Female

• Monitor out x1, VESA (HD15) black, Female

• HDMI, version 1.3v x2

• CVBS In (Composite Video) RCA connector (Y), Female x1

• SVHS In (S-Video), 4-pin mini DIN, Female x1

• Provides S-Video input x1

• BNC RGBHV, BNC 75ohm Females x1 sets

• DC output. 3.5mm jack, Female x1,

Volts: 12v Amps: 250ma Max

• 9-pin RS232 male (d-sub) x1

• RJ45

10 Input single

• Hsync Frequency: 15 ~ 91.1 kHz

• Vsync Frequency: 43 ~ 85 Hz

• Video Signal RGB (PC)

Analog RGB: 0.7Vp-p, 75 ohm

Analog RGB: 1Vp-p, 75 ohm, Sync. Signal

Separate TTL H,V Sync.

Composite TTL Sync.

• Video

Composite video: 1Vp-p,�5 ohm

S-video Luminance: 0.714Vp-p,75 ohm

S-video Chrominance: 0.286Vp-p,75 ohm

1-3

CLM W6_CLM HD6 Jan 31, 2012

Chapter 1 Introduction

No Item Description

11 DMD chip

• DMD TYPE-A 1280x800 PIXEL 0.65” WXGA-800 2xLVDS

“TI” (for CLM W6)

• DMD TYPE-A 1080P 0.65” 2xLVDS (for CLM HD6)

12 Native resolution • 1280x800 WXGA (for CLM W6)

• 1920x1080 1080P (for CLM HD6)

13 Video compatibility

• Standards :

NTSC, NTSC4.43

PAL/PAL-M/PAL-N/SECAM

SDTV compatible (480i/p, 5�6i/p)

HDTV compatible (�20p, 1080i, 1080p)

14 Computer compatibility Apple® Macintosh®, iMac®, and VESA Standards:

WUXGA, UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA

15 Color Wheel

• Standard:

5-segment: R:80°/Y:30°/G:84°/W:90°/B:76°

• Optional:

6-segment: R:100°/C:23°/B:72°/G:90°/M:30°/Y:45°

16 Lamp • OSRAM 2xP-VIP 330W/1.0 E20.9 x2

1� System controller

• CLM HD6:

DUAL TI DDP 3021

• CLM W6

TI DDP 3020F

18 Cooling system

• - Advanced Air Flow

- Eleven fans with system acoustic noise level

- Temperature control circuits with adaptive fan rotational

speeds

- Maximum touch temperature meets UL60950-1

19 Temperature • Operating: 5°C -- 35°C

1-4 CLM W6_CLM HD6 Jan 31, 2012

Chapter 1 Introduction

1-2 System block diagram

Other manuals for CLM W6

This manual suits for next models

Table of contents

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual