Barco F90 series Instruction Manual

F90 Dust Filter

Installation and Maintenance

601–0456/00

14/08/2017

Barco Fredrikstad AS

Habornveien 53, N-1630 Gamle Fredrikstad, Norway

Phone: +47 6930 4550

Fax: +47 6930 4580

Support: [email protected]

Visit us at the web: www.barco.com

Printed in

1. Filter Assembly

1. FILTER ASSEMBLY

About

This chapter describes how to assemble and install the ﬁlter

The ﬁlter kit is delivered as a complete kit, but not pre-assembled. The assembly of the kit is performed in parallel with the installation.

Due to a change in airﬂow when the ﬁlter is installed, the fan speed may increase and impact the perceived fan noise.

1.1 Kit Content

Kit Content

Article Number Description Pcs

400–0946 S/A Dust ﬁlter 1

505–0276 S/D ﬁlter screw 6

1.2 Environmental conditions

Due to changed airﬂow resistance when ﬁlter is installed, there are changes in the ambient operating conditions for the projector.

See table below.

Environment Ambient operating temperature Relative humidity

0 – 500m +10 – 40°C 10 – 80% RH

500 – 3000m +10 – 35°C 10 – 80% RH

1.3 Assembly and installation

1. Put the screws (505–0276) in to the holes as indicated in the illustration below. Press the screw until it is snaps into position

2. Apply the ﬁlter frame over the projector’s side cover. Ensure that the captive screws in the ﬁlter frame align with the holes in the

projector side cover, as shown in the illustration.

Image 1-1

Entering the captive screws

Image 1-2

Applying the ﬁlter frame

3. Ensure that the micro switch at the top of the side cover is engaged by the stud on the ﬁlter frame.

601–0456 F90 DUST FILTER 14/08/2017 1

1. Filter Assembly

Filter frame

Projector side cover

Image 1-3

Microswitch engagement

4. Hold the ﬁlter frame in position, and enter the screws in each corner in the corresponding threads in the side cover. Tighten the

screws in a cross pattern. Enter and tighten the two last screws

2601–0456 F90 DUST FILTER 14/08/2017

2. Maintenance

2. MAINTENANCE

2.1 Cleaning the ﬁlter

The ﬁlter can be vacuum cleaned.

The frequency of the cleaning depends on the projectors operating environment. It is advised to inspect the ﬁlter regularly.

If the ﬁlter becomes clogged, the reduced airﬂow may result in a thermal warning and the projector is at risk of shutting down. If this

occurs, please clean the ﬁlter before attempting to turn the projector back on.

601–0456 F90 DUST FILTER 14/08/2017 3

Other manuals for F90 series

Table of contents

Other Barco Projector Accessories manuals

Barco

Barco ClickShare CSE-200+ User manual

Barco

Barco LX-5 SERIES User manual

Barco

Barco Cooler rigging frame User manual

Barco

Barco ICMP HDD User manual

Barco

Barco R9841810 User manual

Barco

Barco D-ILA LX-5 User manual

Barco

Barco DC2K User manual

Barco

Barco XDL User manual

Barco

Barco MOCA User manual

Barco

Barco ClickShare CSE-800 Installation and user guide

Barco

Barco ClickShare CSE-200+ Series User guide

Barco

Barco Event Master E2 User manual

Barco

Barco CX-50 Gen2 User manual

Barco

Barco CLICK SHARE CS-100 User manual

Barco

Barco R9841770 User manual

Barco

Barco R9840680 User manual

Barco

Barco QVD 3.0-6.0:1 User manual

Barco

Barco R9841550 User manual

Barco

Barco ClickShare Present C Series User manual

Barco

Barco FLM lamp house User manual

Barco

Barco R9861520NA User manual

Barco

Barco Preca 1280 User manual

Barco

Barco ClickShare CSE-200 User manual

Barco

Barco PreCa 1280i User manual

Popular Projector Accessories manuals by other brands

Optoma

Optoma BX-AL133B datasheet

PEERLESS

PEERLESS PE 1120 Installation and assembly

Osram

Osram SIRIUS HRI Series Directions for use

Presentation Switchers

Presentation Switchers PS111 quick start

Kramer

Kramer VIA GO user manual

Yamaha

Yamaha PJL-112 Replacement guide

Swedstyle

Swedstyle CL23AA02ZA25E operating manual

Mitsubishi Electric

Mitsubishi Electric 236CB Features

Epson

Epson BrightLink 475Wi user guide

Acer

Acer WP100 quick guide

i3 i3board user manual

CHIEF

CHIEF HB-43E installation instructions

Biamp

Biamp Modena Hub Network administrator's guide

NEC

NEC MP10RX Quick setup guide

Panamorph

Panamorph DCR-S3 installation guide

Exact solutions

Exact solutions FRAME-EVO-P10 manual

CHIEF

CHIEF VCM103S installation instructions

InFocus

InFocus LP70+ Replacement instructions