BAFANG E-SYSTEM User manual

MANUAL

BAFANG E-SYSTEM

INHALT

Display DP C11.CAN 3

Display DP C240.CAN 21

Motor H300 (RM G010.250.D) 37

Motor H400B (RM G020.250/350.DC) 41

Motor H600 (RM G370.250.DC) 45

DISPLAY DP C11.CAN

CONTENT

1.1 Important Notice 4

1.2 Introduction of Display 4

1.3 Product Description 5

1.3.1 Specifications 5

1.3.2 Functions Overview 5

1.4 Display 6

1.5 Key Definition 6

1.6 Normal Operation 7

1.6.1 Switching the System On/Off 7

1.6.2 Selection of Support Levels 7

1.6.3 Selection mode 7

1.6.4 Headlights / backlighting 8

1.6.5 Walk Assistance 8

1.6.6 Service 9

1.6.7 Battery capacity indication 9

1.7 Settings 10

1.7.1 "Display Setting" 10

1.7.2 "Information" 13

1.8 Error Code Definition 16

DP C11.CAN

1.2 INTRODUCTION OF DISPLAY

• Model: DP C11.CAN BUS

• The housing material is PC and Acrylic, and

the button material is made of silicone.

• The label marking is as follows:

Note: Please keep the QR code label attached to the

display cable. The information from the Label is used

for a later possible software update.

1.1 IMPORTANT NOTICE

• If the error information from the display

cannot be corrected according to the inst-

ructions, please contact your retailer.

• The product is designed to be waterproof. It

is highly recommended to avoid submerging

the display under water.

• Do not clean the display with a steam jet,

high-pressure cleaner or water hose.

• Please use this product with care.

• Do not use thinners or other solvents to

clean the display. Such substances can

damage the surfaces.

• Warranty is not included due to wear and

normal use and aging.

DISPLAY DP C11.CAN

1.3 PRODUCT DESCRIPTION

1.3.1 Specifications

• Operating temperature: -20℃~45℃

• Storage temperature: -20℃~50℃

• Waterproof: IP65

• Storage room Humidity: 30%-70% RH

1.3.2 Functional Overview

• Speed display (including top speed and aver-

age speed, switching between km and miles)

• Battery capacity indicator

• Lighting control

• Brightness setting for backlight

• Walk assistance

• Indication of performance support

• Motor output power indicator

• Time display for single journeys

• Kilometer stand (including single-trip dis-

tance, total distance and remaining distance)

• Setting the support levels

• Energy consumption indicator CALORIES

(Note: If the display has this function)

• Display for the remaining distance (Depends

on your riding style)

• Information View (battery, controller, HMI

and sensor)

• Error messages view

1.4 DISPLAY

1Display of battery capacity in real time.

2Support level

3The display shows this symbol , When

the lights are turned on.

4Unit of speed

5Digital speed display

6Trip: Daily kilometers (TRIP) - Total kilometers

(ODO) - Top speed (MAX) - Average speed

(AVG) - Rremaining distance (RANGE) - Ener-

gy Consumption (CALORIES) - Output power

(POWER)- Travel time (TIME).

Service: Please see the service section

1.5 KEY DEFINITION

down

System On/Off

DISPLAY DP C11.CAN

1.6 NORMAL OPERATION

1.6.1 Switching the System ON/OFF

Press and hold (>2S) on the display to turn on the system. Press and hold (>2S) again to turn

off the system.

If the "automatic shutdown time" is set to 5 minutes (it can be reset with the "Auto Off" function,

See "Auto Off"), the display will automatically be turned off within the desired time when it is not

in operation.If the password function is enabled, you must enter the correct password to use the

system.

1.6.2 Selection of Support Levels

When the display is turned on, press the or button (<0.5S) to switch to the support level, the

lowest level is 0, the highest level is 5. When the system is switched on, the support level starts in

level 1. There is no support at level 0.

For different assist levels please see part "Assist Mode".

1.6.3 Selection mode

Brieﬂy press the button (<0.5s) to see the different trip modes.

Trip: daily kilometers (TRIP) - total kilometers (ODO) - Maximum speed (MAX) - Average speed (AVG)

- Rremaining distance (RANGE) - Energy consumption (CALORIES) - Output power (POWER) - Travel

time (TIME).

1.6.4 Headlights / backlighting

Hold the button (>2S) to activate the headlight and taillights.

Hold the button (>2S) again to turn off the headlight. The brightness of the backlight can be set

in the display settings "Brightness".

1.6.5 Walk Assistance

The Walk assistance can only be activated with a standing pedelec.

Activation: Press the button until this symbol appears. Next press and hold down the

button whilst the symbol is displayed, now the Walk assistance will activate. The symbol

will blink and the pedelec moves approx. 5 km/h. After releasing the button, the motor stops

automatically and switches back to level 0.

The Walk assistance can only be activated with a standing pedelec.

DISPLAY DP C11.CAN

1.6.6 Service

The display shows "SERVICE" as soon as a certain number of kilometers or battery charges has been

reached. With a mileage of more than 5000 km (or 100 charge cycles), the “SERVICE" function is

displayed on the display. Every 5000 km the display "SERVICE" is displayed every time. This function

can be set in the display settings.

1.6.7 Battery capacity indicator

The battery capacity is shown in the top left of the display. Each full bar represents a remaining

capacity of the battery in a percentage.

(as shown in the diagram below):

Capacity Range Indicator

80%-100%

60%-80%

40%-60%

20%-40%

5%-20%

<5% blinking

1.7 SETTINGS

After the display is turned on, press and hold the and buttons (at the same time) to enter

into the setting menu, By pressing the or button (<0.5S), you can highlight and select Display

Setting, Information or Exit. Then press the button (<0.5S) to conﬁrm your selected option.

Or highlight "EXIT" and press the button (<0.5S) to return to the main menu, or highlight "BACK"

and press (<0.5S) the button (<0.5S) to return to the Settings interface.

1.7.1 "Display Setting"

Press the or button (<0.5S) and highlight Display Setting, and then brieﬂy press the button

(<0.5S) to access the following selections.

1.7.1.1 "TRIP Reset" Reset mileage

Press the or button (<0.5S) to highlight “Trip Reset” in the Display setting menu, and then

press button (<0.5S) to select. Then with the or button choose between “YES” or “NO”.

Once you have chosen your desired selection, press the button (<0.5S) to save and exit to the

"Display setting".

This manual suits for next models

Table of contents

Other BAFANG Bicycle Accessories manuals

Popular Bicycle Accessories manuals by other brands

Sigma

Sigma BC 16.16 manual

Playcore

Playcore Dero Setbacks installation instructions

VDO Cyclecomputing

VDO Cyclecomputing x3dw instruction manual

Cateye

Cateye RAPID X2 manual

buratti meccanica

buratti meccanica Clorofilla Trail Use and maintenance manual

Shimano

Shimano SG-8R20 Service instructions

BOB

BOB YAK owner's manual

APLIC

APLIC 303303/20190717TW012 user manual

SRAM

SRAM AXS BlipBox user manual

Garmin

Garmin EDGE 500 owner's manual

Shimano

Shimano FD-RX810 Dealer's manual

Cateye

Cateye V2C - Quick start manual

KMART

KMART 43115907 instructions

SIGMA SPORT

SIGMA SPORT Buster 2000 manual

NVO Components

NVO Components STEM manual

DAXYS

DAXYS BP188 user manual

XLC

XLC BV-W17 manual

Deda Elementi

Deda Elementi SUPERBOX user manual