Aztech ADSL USB Modem Product information sheet

Windows® 98 Second Edition, Windows® Me, Windows® XP and Windows® 2000

supported

Easy Start

(Read Me First)

Version 1.0

Protocols discussed

RFC 1483

RFC 1577

RFC 2364

RFC 2516

ADSL USB Modem

Contents...

About this Easy Start ............................................... 2

Safety Guidelines ..................................................... 2

Package.................................................................. 2

Minimum System Requirements ................................ 3

Front Indicators ....................................................... 3

Step 1: Installing Your ADSL USB Modem Driver ........ 4

Step 2: Setting Up ADSL USB Modem ...................... 6

Step 3: Configuring the IP Settings (For RFC 1577

user only) ................................................... 7

3.1 For Windows® XP ............................ 7

3.2 For Windows® Me / Windows® 98

Second Edition ................................. 8

3.3 For Windows® 2000 ....................... 10

Step 4: Dial-Up to the Internet (for RFC 2364 and

RFC 2516 users) ....................................... 11

ADSL USB Modem Easy Start

Package

If you found any missing items, please contact your dealer immediately.

(The actual cables that are included with your package may differ in appearance from country to

country)

Telephone extension cable

this Easy Start

USB cable

Installation CD

ËÌ

ÍÎ

ADSL

USB

Modem

Safety Guidelines

•Keep the modem away from fluid, direct sunlight and excessive heat.

•During times of lightning strike/thunderstorm, do not use the modem.

•This product is for use only in UL Listed computers.

•To reduce the risk of fire, use only No. 26 AWG or larger telecommunication

line cord.

About this

Easy Start

This booklet contains information on setting up your

ADSL USB Modem. It touches on the key installation

procedures to help you setup your modem !

ÏMicro-Filter (optional) 1

On commonly asked questions or for problems encountered during

the setting up / running of your modem, please refer to theFrequently

Asked Questions & Troubleshooting Guide located in the \Manuals

folder on your Installation CD.

1 Micro-Filter can be purchased separately from your dealer.

Product warranty does not apply to damage caused by lightning, power surges or wrong voltage.

ADSL USB Modem Easy Start

Front Indicators

The indicators show the status for the following:

Power :Lights up when power is supplied via the USB port from your PC

ADSL :Lights up when the ADSL line is established

Data :Blinks when the modem is transmitting/receiving data

Power ADSL Data

Minimum System Requirements

•IBM PC-based computer with Pentium® 233 processor

•32MB RAM

•20MB hard disk space (system files and modem driver only)

•A free USB Port

•CD-ROM drive

•Windows® 98 Second Edition / Windows® Me / Windows® XP /

Windows® 2000

ADSL USB Modem Easy Start

Step 1: Installing Your

ADSL USB Modem Driver

If you have connected the Modem to your PC BEFORE installing the

driver, you will be prompted with the New Hardware Wizard.

ClickCancelat the prompt. Disconnect the USB cable from your Modem

and proceed with the following installation first!

v. At the following prompt,

click Finish to restart your

computer.

The following contains the driver installation instructions for the protocols RFC

1483 (Bridging), RFC 1577 (IPoA), RFC 2364 (PPPoA) and RFC 2516 (PPPoE).

You only need to install one of them, as determined by your ADSL Service Provider.

i. Power on your computer. Place the Installation CD on your CD-ROM Drive.

ii. From the Installation CD, go to the appropriate folder, either 'RFC1483',

'RFC1577', 'RFC2364' or 'RFC2516' (as determined by your ADSL Service

Provider) and double-click the file setup.exe.

iii. At the following screen, click Next.

iv. Allow some time for Windows to copy the required files.

ADSL USB Modem Easy Start

vi. After system reboot, click OK at the USB Warning.

Connect one end of the USB cable ( ) to the USB Port on

the Modem and the other end ( ) to the USB port on your

computer.

(See the illustration at Step 2).

viii. You will be prompted Installation Completed Successfully. Click OK and

proceed with Step 2 to setup your Modem.

vii. For Windows®98 Second Edition users, you may be prompted for your

Windows CD-ROM.

Replace the Installation CD on

your CD-ROM drive with Windows

98 Second Edition CD-ROM.

In the text box, enter the path

(example D:\win98) of your

Windows CD-ROM and click OK.

ADSL USB Modem Easy Start

Step 2: Setting Up ADSL USB Modem

With the "Hot Swap" feature in this modem, you can connect your modem to your

computer without having to power off your system!

Carry out the connections as illustrated.

2 For details on the usage of the Micro-Filter, please refer to the Frequently Asked Question &

Troubleshooting Guide, 'Do I need to use a Micro-Filter when using ADSL ?' on your Installation CD.

Your USB cable should be connected as illustrated above. Proceed with the rest

of the connections as follow:

ÊConnect one end of the telephone extension cable to the Line Jack on the

modem and the other end to a telephone wall socket.

ËConnect a Micro-Filter2to the TEL Jack on the modem and then connect your

Telephone Set to the Micro-Filter. (The connection to the telephone set is optional.

The Micro-Filter is not required if you are not connecting to a Telephone Set).

For RFC 1483 users, this completes the setting up of your ADSL Modem. Please

refer to your ADSL Service Provider to install a third-party utility for dial-up to the

Internet.

For RFC 1577 users, please proceed to Step 3.

For RFC 2364 and 2516 users, please proceed to Step 4.

Telephone set

Telephone

wall socket

Telephone

extension cable

USB port

USB Port

TEL jack

LINE jack

USB cable

rear view of a PC

Micro-Filter 2

ADSL USB Modem Easy Start

Step 3: Configuring the IP Settings

(For RFC 1577 users only)

3.1 Configuring the IP Settings - For Windows® XP

(Instructions are based on default Start menu option)

i. From your Windows taskbar, click Start >More Programs > Accessories >

Communications > Network Connections.

ii. From Other Places, click My Network Places. Right-click on the LAN Area

Connection and select Properties.

iii. Ensure that the field Connect Using indicates ADSL USB MODEM LAN

ADAPTER.

(This verification is important as you may have more than one Local Area Connection

icons installed in your system).

Select Internet Protocol (TCP/

IP) and click Properties.

iv. Click Use the following IP address.

Enter the addresses as given by

your ADSL Service Provider.

Click Use the following DNS

server addresses. Enter the

DNS server addresses as given

by your ADSL Service Provider.

Click OK. Click OK again to

close.

Restart your system when prompted.

You can start surfing the Internet by

launching your Internet Browser.

ADSL USB Modem Easy Start

3.2 Configuring the IP Settings

- For Windows® Me / Windows® 98 Second Edition

i. From your Windows desktop, right-click on the Network Neighborhood icon.

Select Properties.

ii. From the Configuration tab, select TCP/IP-> ADSL USB MODEM LAN

ADAPTER and click Properties.

iii. Select the IP Address tab.

Click Specify an IP address.

Enter the addresses as given

by your ADSL Service Provider.

iv. Select DNS Configuration tab.

Click Enable DNS.

Enter the Host name.

Enter the DNS Server Search Order.

addresses and click Add. (Values to be

provided by your ADSL Service Provider)

ADSL USB Modem Easy Start

v. Select the Gateway tab.

Enter the New Gateway

address assigned by your

ADSL Service Provider and

click Add.

vi. Select Advanced tab.

Select Yes from the Value

drop-down list and click

OK.

You can start surfing the Internet by launching your Internet Browser.

ADSL USB Modem Easy Start

3.3 Configuring the IP Settings - For Windows® 2000

i. From your Windows desktop, right-click on the icon My Network Places.

Select Properties.

At the Network and Dial-up Connections window, right-click on the Local

Area Connection icon and select Properties.

ii. Ensure that the field Connect Using indicates ADSL USB MODEM LAN

ADAPTER.

(This verification is important as you may more than one Local Area Connection icons

installed in your system).

Select Internet Protocol (TCP/

IP) and click Properties.

iii. Click Use the following IP

address. Enter the addresses as

given by your ADSL Service

Provider.

Click Use the following DNS

server addresses. Enter the

DNS server addresses as given

by your ADSL Service Provider.

Click OK.

Click OK again to close.

Restart your system when prompted.

You can start surfing the Internet by launching your Internet Browser.

Other manuals for ADSL USB Modem

Other Aztech Modem manuals

Aztech

Aztech HL109EP Instructions for use

Aztech

Aztech UM9800-A User manual

Aztech

Aztech DSL 300P Product information sheet

Aztech

Aztech DSL700P User manual

Aztech

Aztech MSP2950(W) User manual

Aztech

Aztech 56K PCI Modem User manual

Aztech

Aztech MDP3880SP-U User manual

Aztech

Aztech 206U User manual

Aztech

Aztech HW831 User manual

Aztech

Aztech MSP3885 Instructions for use

Aztech

Aztech HL110EW Instructions for use

Aztech

Aztech 100U Product information sheet

Aztech

Aztech DSL500U Instructions for use

Aztech

Aztech DSL500U Product information sheet

Aztech

Aztech 206U User manual

Aztech

Aztech UM9800-U User manual

Aztech

Aztech 56K External Modem Product information sheet

Aztech

Aztech DSL 300P Product information sheet

Aztech

Aztech DSL305E Instructions for use

Aztech

Aztech MDP3880SP-U User manual

Aztech

Aztech MR2800-W User manual

Aztech

Aztech MSP3880U Series User manual

Aztech

Aztech 100U Product information sheet

Aztech

Aztech DSL705EU Manual

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual