Axis Axis 216FD User manual
ENGLISH FRANCAIS DEUTSCH ESPAÑOL ITALIANO
AXIS 216FD Fixed Dome
Network Camera
Installation Guide
AXIS 216FD Installation Guide Page 3
ENGLISH
AXIS 216FD
Fixed Dome Network Camera
Installation Guide
This installation guide provides instructions for installing the AXIS 216FD Fixed Dome
Network Camera on your network. For all other aspects of using the product, please see the
AXIS 216FD User’s Manual, available from www.axis.com or on the Axis Network Video
Product CD.
Installation steps
1. Check the package contents against the list below.
2. Install the hardware - page 4
3. Set the IP address - page 7
4. Set the password - page 13
5. Adjust the image - page 14
Package contents
Item Title/Variants
Fixed Dome Network Camera AXIS 216FD
Indoor power adapter
Note: The power adapter is country spe-
cific, please check that the type of power
adapter you are using is correct
Europe
UK
Australia
USA/Japan
Argentina
Korea
Extension cable 1.8m (5.9 ft) Power cable
Terminal block connector 4-pin I/O connector block
Mounting kit Screwdriver for tamper-proof screws
Tamper-proof screws
Drill template
Documentation AXIS 216FD Installation Guide
Axis Network Video Product CD
Warranty document
Important!
This product must be installed in
compliance with local laws and
regulations.
Page 4 AXIS 216FD Installation Guide
Installing the hardware
Refer to the illustration on page 5 for a detailed overview of the AXIS 216FD.
1. Make a note of the serial number (S/N), which is located on the product label on the base
of the unit casing. The serial number is used in the installation.
2. Using the drill template, drill two holes in the ceiling/wall.
3. Install the camera unit on the ceiling/wall using screws and plugs that are appropriate for
the ceiling/wall material.
Notes:
• The AXIS 216FD is designed for indoor use only.
• The AXIS 216FD can be mounted with the network and power cables routed through the wall/ceiling or through
the sides. There are cover plates for the openings on both sides of the dome cover.
• Ensure the camera is placed so that the tamper-proof screws can be tightened using the supplied screw driver.
Connecting the cables
1. Connect the network cable to the camera’s network connector.
2. Connect power using one of the methods listed below:
• PoE (Power over Ethernet) via the network cable. This will automatically be detected if
available via the network.
• Connect the supplied indoor power adapter to the power connector on the camera unit.
3. Check that the network, status and power indicators (LEDs) light up green. See the table on
page 6 for LED descriptions.
4. Refer to “Setting the IP address” on page 7 for information on how to assign an IP address
to the AXIS 216FD.
AXIS 216FD Installation Guide Page 5
ENGLISH
Description
Network
connector Serial number (S/N)
Please make a note of the
The serial number is required
during the installation.
serial number and retain
for future reference.
Power
I/O terminal
connector
Dome casing
connector
Camera unit
Power
indicator
Network
indicator
Audio out
Audio in
Status
indicator
Microphone
(LED)
(LED)
(LED)
Control
button
Cover
plates
Page 6 AXIS 216FD Installation Guide
I/O terminal connector block
LED indicators
Pin Function Description
4 Transistor
Output
With a maximum load of 50mA and a maximum voltage of 24V DC, this output has an
open-collector NPN transistor with the emitter connected to the GND pin. If used with an
external relay, a diode must be
connected in parallel with the load, for protection against voltage
transients.
3 Digital Input Connect to GND to activate, or leave floating (or unconnected) to
deactivate.
23.3VDC
Can be used to power auxiliary equipment, max 50mA.
1GND
LED Color Description
Network Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No connection.
Status Green Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to flash only when
the camera is accessed. See the online help files for more information. Go to Setup > System
Options > LED settings
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
AXIS 216FD Installation Guide Page 7
ENGLISH
Setting the IP address
The AXIS 216FD is designed for use on an Ethernet network and must be assigned an IP
address to make it accessible.
Windows
Notes:
• The AXIS 216FD has the default IP address 192.168.0.90
• To view the admin pages for the DHCP server, please see the server’s own documentation. You may need to
contact your network administrator.
• If setting the IP address fails, check that there is no firewall blocking the operation.
See page 10 for other available methods for setting or discovering the IP address of the
AXIS 216FD, e.g. in other operating systems.
AXIS IP Utility and AXIS Camera Management are the recommended methods for setting an IP address in Windows.
DHCP Server
in network
Operating system Recommended
method for:
AXIS IP Utility
See page 8
Optional Windows Single camera /
small installations
AXIS Camera Management
See page 9
Optional Windows 2000
Windows XP Pro
Windows 2003 Server
Multiple cameras /
large installations
Requirements
Installation methods
Page 8 AXIS 216FD Installation Guide
AXIS IP Utility
AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually set a static IP address. AXIS IP Utility is available on
the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS 216FD on the same network segment (physical subnet) as
the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS 216FD is con-
nected to the network and that power
has been applied.
2. Start AXIS IP Utility.
When the AXIS 216FD appears in the
window, double-click it to open the
camera’s home page.
3. See page 13 for instructions on how to
set the password.
Set the IP address manually
1. Acquire an unused IP address on the
same network segment your computer
is connected to.
2. Click the button Set IP address using serial number and enter the serial number and
IP address for the AXIS 216FD. The serial number is located on the product label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page to access the AXIS 216FD web pages.
5. See page 13 for instructions on how to set the password.
Single camera / small installations
Notes:
Set the IP address using IP Utility within 2 minutes of starting
the camera.
AXIS IP Utility can be used to change a dynamically set
IP address to a static one.
AXIS 216FD Installation Guide Page 9
ENGLISH
AXIS Camera Management
AXIS Camera Management can automatically find and set IP addresses, show connection
status and manage firmware upgrades of multiple Axis video products. AXIS Camera
Management is available on the Axis Network Video Product CD, or can be downloaded from
www.axis.com/techsup
Set the IP address
1. Check that the AXIS 216FD is connected to the network and that power has been applied.
2. Start AXIS Camera Management. When the AXIS 216FD appears in the window, double-
click it to open the camera’s home page.
3. See page 13 for instructions on how to set the password.
Set the IP address in multiple devices
AXIS Camera Management speeds up the process of assigning IP addresses in multiple devices
by suggesting available IP addresses from a specified range.
Select the devices that you want to configure (you can even select different models) and click
the Assign IP icon.
Enter the range of IP addresses, the subnet mask and default router that the devices can use.
Click Find and the program will search in the specified range and suggest an available IP
address for each device.
Multiple cameras / large installations
Page 10 AXIS 216FD Installation Guide
Other available methods
This table shows alternative methods for setting or discovering the IP address.
Notes:
•UPnP™, DHCP and Bonjour are enabled by default in the AXIS 216FD.
• The AXIS 216FD has the default IP address 192.168.0.90
• To view the admin pages for the DHCP server, please see the server’s own documentation. You may need to
contact your network administrator.
• If setting the IP address fails, check that there is no firewall blocking the operation.
•AXIS Dynamic DNS Service requires an Internet connection without an HTTP proxy.
•Bonjour - applicable only in browsers with support for Bonjour, e.g. Safari.
UPnP™
UPnP™ functionality is enabled by default in the AXIS 216FD. If also enabled on your computer
(Windows ME or XP), the camera will automatically be detected and a new icon will be added
to “My Network Places.” Click this icon to access the AXIS 216FD. See also page 13 for
instructions on how to set the password.
Note that you must install the AXIS 216FD on the same network segment (physical subnet) as
the computer handling the installation.
Note:
DHCP Server
in network
Operating system Recommended
method for:
UPnP™
See page 10
Optional Windows (ME or XP)
Bonjour
See page 11
Optional Mac OSX (10.4 or later) Macintosh
AXIS Dynamic DNS Service
See page 11
All
ARP/Ping
See page 12
All
View DHCP server
admin pages for IP address
(See note below)
Required All
To install the UPnP™ service on your computer, open the Control Panel from the Start Menu and select Add/Remove
Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then
select UPnP as the service to add.
Requirements
Installation methods
UPnP™ is a certification mark of the UPnP™ Implementers Corporation.
Other manuals for Axis 216FD
7
Table of contents
Languages:
Other Axis Security Camera manuals
Axis
Axis P1346-E User manual
Axis
Axis F101-A XF P1377 User manual
Axis
Axis AXIS T95A00 User manual
Axis
Axis P3343 User manual
Axis
Axis P32-VE Mk II Series User manual
Axis
Axis Q1656-BE User manual
Axis
Axis Q6215 User manual
Axis
Axis Q35 Series User manual
Axis
Axis M1045-LW User manual
Axis
Axis M3113-R User manual
Axis
Axis Q2901-E Administrator Guide
Axis
Axis P9106-V User manual
Axis
Axis M1124-E User manual
Axis
Axis AXIS 207W User manual
Axis
Axis Network Camera AXIS 221 User manual
Axis
Axis M11-L Series User manual
Axis
Axis M3104-LVE User manual
Axis
Axis Q19 Series User manual
Axis
Axis ExCam XPT Q6075 User manual
Axis
Axis 233D User manual
