AVX AVX-BT6IW User manual
av-express.com
#InWallSpeakers
In-Wall Bluetooth Speakers
Model
AVX-BT6IW • AVX-BT8IW
INSTALLATION MANUAL
• Drywall Saw
• Utility Knife
• Level
• Wire Strippers
• Phillips Screwdriver
• Drill
• Masking Tape
• Pencil
• Fiberglass Push Rods
• Rubber Gloves
• Measuring Tape
• Cold Beverage....
Tools Needed for Installation
You're ready!
LET’S DO THIS!
GRAB YOUR TOOLS
1 2 3 4 5 6 7 8 9 10
TEST THE SOUND SYSTEM
BEFORE THE INSTALLATION
WARNING
Installation Instructions
Plan Speaker Wire Installation
NOTE: SOUND QUALITY OF THESE SPEAKERS
WILL BE VERY DIFFERENT OUT OF THE WALL
VS. HOW THEY SOUND INSTALLED WHEN
THEY ARE INSTALLED IN THE WALL. SOUND
QUALITY WILL BE NOTICEABLY IMPROVED
ONCE THESE SPEAKERS ARE INSTALLED IN
THE WALL. PLEASE CONSULT AV EXPRESS IF
YOU HAVE ANY QUESTIONS.
Add Plants,
artwork, area rugs
too if you like....
Optimal Performance Setup
Bluetooth streaming source location should be iden-
tified before installing speakers in the wall. You may
need to adjust your ideal streaming location based
on multiple factors such as your application and the
distance from the speakers to your straming device.
For more information consult AV-Express.
Determine Stereo Speaker Placement
8’ - 10’
8’ - 10’
8’ - 10’
Center of Reference
LR
Choose Your Speaker Placement
Location Carefully. Given the nature of
in-wall speakers, once they’re installed
they can not be adjusted. Optimal
placement of the in-wall speakers must
be determined BEFORE you start the
actual installation.
38” - 42”
Check for any obstruction
MUSIC
STREAMING
STEP 1
TEMPLATE
Use Cut-Out Template for the Speakers
Find studs with the
stud finder.
*Insert favorite stud
joke here...
Use the cut-out
template. Tape the
template to the wall
where you want the
speaker and trace an
outline with a pencil.
Use a level to make
sure the template is
properly aligned and
straight.
NOTE: Before drilling
or cutting into wall
ensure there are no
obstructions.
STEP 2
1/2”
EXPLORATION
HOLE
Jab Saw /
Drywall Saw
1/2” HOLES
DRILLED
IN SPEAKER
TEMPLATE
CORNERS
Drill a 1/2" hole in the four corners of the template.
Using a manual drywall saw or razor blade, cut around
all four edges of the cut-out and remove the piece of
drywall.
Measure and cut the speaker openings
TEMPLATE
Route speaker cables
ENSURE
SNAKE AND
SPEAKER WIRE
ARE SECURELY
TAPED
TOGETHER
SPEAKER WIRE
Running wires behind baseboards: Remove the baseboards
and cut a channel into the bottom of the drywall or plaster for
the wires and then reinstall the baseboards.
SNAKE
STEP 3
(Fish tape or fish rod
may be required)
STEP 4
Install the speakers
Test the area to make sure that the in-wall speaker will
fit perfectly. Carefully push the speaker into the hole
until it is in place. Make sure the dogleg clamps hold
the in-wall speaker in place. Tighten the screws with
the screwdriver.
Turn on the system and
test the speakers for
awesome sound!
Admire your work!
Turn on the system and test the speakers for
sound. (Don’t turn it on at full volume)
No Stairway!
Test the whole system
STEP 5
AC/DC Adapter
(Connect to only one
speaker, this is the
power source)
Wall Outlet
Part Number
Working voltage
Music Power
Signal to noise ratio
Channel: Stereo
Operating frequency
AVX-BT6IW
15V/2.4A
40W
80dB
L R
2.4GHZ
SPECS:
Paint the speaker grill covers to match the room décor
or not!
Install speaker grill covers
STEP 6
Part Number
Working voltage
Music Power
Signal to noise ratio
Channel: Stereo
Operating frequency
AVX-BT8IW
20V/2.4A
80W
80dB
L R
2.4GHZ
This manual suits for next models
1
Table of contents
Other AVX Speakers manuals
