Avtech DGC5205TSE User manual

888Z

d5205tse_V0.9

5MP IR Dome Camera User Manual

Please use this camera with a recorder which supports HD video recording.

Please read the instructions thoroughly before using the product.

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of

such damages.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence

of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ROHS Announcement

All lead-free products offered by the company comply with the requirements of the European law on the Restriction

of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly

“lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected

separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do

not dispose of these products as unsorted municipal waste.

CE Mark

This apparatus is manufactured to comply with the radio interference.

The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or

remove any content in this manual at any time.

FEATURES

1. 1/2.5” CMOS Sensor with up to 5MP video output

2. Low light sensitivity of 0.1 Lux / F1.8, 0Lux (IR LED ON)

3. Quadbrid video output with TVI, CVI, AHD & CVBS

4. DWDR to increase image recognizability in overexposure and dark areas

5. Day and night 24-hour surveillance with IR effective distance up to 50 meters

6. IP66 for weather-proof application

7. Camera parameters adjustable when used with HD CCTV DVR

PACKAGE CONTENT

IR dome camera User manual Wrench Screws & wall plugs

DIMENSIONS*

*Dimensional Tolerance: ± 5mm

SPECIFICATIONS*

Video Mode TVI, CVI, AHD & CVBS switchable

Pick-up Element 1/2.5 " CMOS image sensor

Number of Pixels 2560 (H) x 1920 (V)

Video Frame Rate 5MP@ 20fps

Min. Illumination 0.1 Lux / F1.8, 0 Lux (IR LED ON)

S/N Ratio More than 48dB (AGC OFF)

Shutter Speed AUTO : 1/25(30)sec~1/50,000sec

Lens f3.6mm / F1.8

Lens Angle 96° (Horizontal) / 50° (Vertical) / 116° (Diagonal)

IR LED 2 units

IR Effective Distance Up to 50 meters

IR Shift YES

Day & Night Mode YES

Noise Reduction YES

IRIS Mode AES

White Balance AUTO

AGC AUTO

Sharpness Adjustable

Flickerless 50HZ / 60HZ / OFF

BLC Adjustable

DWDR YES

IP Rating IP66

Operating Temperature -20℃~ 40℃

Operating Humidity 90% or less relative humidity

Power Source (±10%) DC12V / 0.5A

Current Consumption (±10%) 100mA (IR lED OFF); 240mA (IR LED ON)

Net Weight (kg) 0.32

Optional Peripherals Junction Box (AVA456-BKT / AVA456-HBKT)

* The specifications are subject to change without notice.

INSTALLATION

Step1: Disassemble the camera case into three parts as illustrated in Figure 1.

Part 1 Part 2Base

Figure 1

Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for

securing the bracket and routing the cables (if necessary).

Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged

properly in the bracket, as shown in Figure 2.

Step 4: Secure the bracket to the wall (or ceiling), as shown in Figure 3.

Figure 2 Figure 3

Step 5: Slightly adjust the camera lens to where it’s supposed to face, and replace Part 1 and Part 2 back,

as shown in Figure 4 and Figure 5.

Note: Do not install the lens opposite down. (Refer to

Figure 6

Upside

Downside

Figure 4 Figure 5 Figure 6

Step6: Power on the camera and fine-tune the viewing angle.

Step7: Adjust the position and the viewing angle of the camera, if necessary.

CONNECTION

1. DC12V Input Terminal

Connect the power terminal of the camera to a DC 12V regulated power supply.

Note: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of

this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.

2. Video Output Connector (VIDEO OUT)

Connect the camera video output to the video input of a DVR with 75Ωcoaxial cable.

Note: To ensure the camera has sufficient protection against moisture, an extra waterproof measure, such

as by using an insulating tape, must be used to cover the power and video connectors after

connection.

CAMERA PARAMETERS

This camera series has its own configuration menu.

Note: The access path is taking our HD CCTV recorder as an example. If you’re using other brand’s recorder,

please refer to its own user manual to know how to access the camera parameters.

Based on the recorder type you have, on the live view:

Type 1

Click twice on the channel that this camera is connected to show in full screen, and click on on the

right side to display the PTZ control panel.

Then, click on (Enter) on the PTZ control panel to show the configuration menu of this camera, and

use the arrow keypad to choose between each option.

hen the camera menu is entered, use keypad to move between and

change those configurations.

▲▼ Move between selections.

◄► Change settings.

Call the camera parameters menu or enter the

currently-selected item.

Type 2

Click twice on the channel that this camera is connected to show in full screen, and click on the

bottom left of the channel to show the PTZ control panel.

Then, click on (Enter) on the PTZ control panel to show the configuration menu of this camera, and

use the arrow keypad to choose between each option.

/ Move among sub-menus.

/ Change settings.

Call the camera parameters menu or enter the currently-selected item.

MENU REMARK

MAIN-MENU AE BRIGHTNESS 1 ~ 10

EXPOSURE MODE GLOBAL

AWB MODE ATW

MWB Manually adjust the white balance

parameters by modifying R / B gain

parameters.

DAY - NIGHT MODE EXT Use the external light sensor we

added in the camera to detect the

surrounding light condition and

switch to color or B/W mode.

AUTO

COLOR

VIDEO ENHANCE CONTRAST 1 ~ 10

SHARPNESS 1 ~ 10

COLOR GAIN 1 ~ 10

DNR 1 ~ 10

MIRROR DEFAULT

H Horizontal

V Vertical

HV Horizontal & vertical

D-WDR OFF / ON

VIDEO OUTPUT HD TVI / CVI / AHD / CVBS

VIDEO STANDARD Choose the video resolution and

IPS of this camera in different

video output mode.

REBOOT&APPLY

LANGUAGE ENGLISH / SIMPLIFIED

CHINESE / TRADITIONAL

CHINESE / RUSSIAN /

ITALIAN / PORTUGUESE

RESET

SAVE-EXIT Save the changes and exit the

menu.

EXIT Exit the menu without saving

Table of contents

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications