AVPro Edge AC-MXMV122-UHD User manual

AC-MXMV122-UHD

pg. 1

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Video Flux User Manual

AC-MXMV122-UHD

Video Flux features 16 available (12 at a time) input

options including composite, component, VGA, and

HDMI. It also has the ability to do 4K Quad View or

completely customize-able Multi-view.

Introduction

The AC-MXMV122-UHD is a sophisticated HD/ UHD Quad Multi-view Video Processor controller, designed to handle

and control multiple video signals exceeding 1920 × 1080 HD. The video sources to be displayed in

1. Full–screen,

2. Dual-view,

3. Tri-view,

4. Quad-view

Each of these modes can be viewed on High Definition (HD) and Ultra High Definition UHD (4K) video screens. The most

common analogue and digital video / audio inputs are supported as signal sources, these include: AV (CVBS), YPbPr, VGA,

and HDMI from 480i up to full-HD (on Consumer CEA) and WUXGA (VESA).

The AC-MXMV122-UHD is a single unit that is ideal for applications requiring up to 4 separate video sources on a single

display in applications such as Digital Signage, Teleconferencing, Highway checkpoint Control Rooms, Multi-View outdoor

advertising display management, indoor public advertisement for almost all public places such as airports, ferry stations,

banks, government halls, hotel lobbies, railway station, hospitals and wherever fast switching with multiple content on

single screen is required.

Product Overview

Each video input channel supports all consumer HD/SD Digital and HD/SD Analog video standards. The AC-MXMV122-

UHD is can be easily cascaded and its control signal can be daisy-chained to allow the creation of a large and easy to

control seamless switching or a Multi-View system environment of almost any size (for example, Multi-View of 8 x 4 (32)

windows (video inputs) to a single TV screen or 16 x 8 semi-seamless Matrix switcher by cascading and daisy-chaining AC-

MXMV122-UHD units.

The AC-MXMV122-UHD has two HDMI output ports for showing the multi-view image on two independently controllable

HD/UHD A/V channels simultaneously.

The AC-MXMV122-UHD is a 3 in 1 HD/UHD Video Processing Device that can work in one of three different modes

depending on the application requirement and system configuration:

1) UHD 4K Multi-View Video Processor

This mode displays the four inputs as a quad view or from a single input to the HDMI outputs independently and

in any combination as 4K UHD video output signals. Each output can have a different display setting.

2) Full HD Multi-View Video Processor

This mode displays all four either inputs as a quad view or from a single input to the HDMI outputs independently

as high quality HD video output signals. Both outputs show the same image display.

3) Seamless 4:2 Matrix mode

Each input can be switched and routed to any of the two HDMI output ports without any blanking or picture

freezing. Each output can display any of the input signals as a single image.

AC-MXMV122-UHD

pg. 2

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Features

The AC-MXMV122-UHD is a powerful Video Processing device in a 1U rack-mount chassis, with low power

consumption (less than 20W).

Four video inputs, widely compatible to any SD/HD Digital (HDMI/DVI) and SD/HD Analog in AV (CVBS) /

YPbPr and VGA input.

Each viewer window parameter is completely customizable including layer priority; window positions,

window size, background transparency, Border colour including Border pixel width and much more.

Three operating modes

1. UHD 4K Multi-View Video Processor

2. Full HD Multi-View Video Processor

3. Seamless 4:2 Matrix

Two independent HDMI output ports. When quad mode is selected, user can choose the HDMI output to be

4K or Full HD.

UHD 4K quad Multi-View mode, the HDMI output will present 4 x Full HD signals that will only be visible on a

4K display and each section of 4 x Full HD signal is pixel by pixel displayed on a large 4K UHD panel without

any down scaling degradation.

The switching time in the Seamless Matrix mode is one of the fastest in industry due to the very unique

switching algorithm used.

AC-MXMV122-UHD

pg. 3

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Application Examples

AC-MXMV122-UHD

pg. 4

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Multi-View Mode

Display input images on the Multi-View screen to both of the HDMI outputs using 4 window regions that can be

configured, via the PC based control software, to any size and any position, including borders and prioritized

visibility selection of any overlapped layer for the 4 inputs in the screen windows when using the Multi-View

configuration.

Seamless Matrix Mode

AC-MXMV122-UHD

pg. 5

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Cascaded for 6x2 Full HD Multi-View mode

This mode allows the creation of matrix systems with more video inputs that can be routed to either of the two output

screens. Note that in this mode, the first two HDMI inputs of the right-hand AC-MXMV122-UHD are used to cascade the

outputs from the left-hand AC-MXMV122-UHD. For this mode to operate correctly, each AC-MXMV122-UHD devices

must be assigned a unique RS232 ID value prior to being connect to the installation.

Operation, Controls and Functions

1. Connect source devices to input ports of AC-MXMV122-UHD.

2. If needed, connect RS232 cable from PC RS232 port or USB-RS232 converter to AC-MXMV122-UHD.

3. Connect HDMI output port to TV or any other 4Kx2K HDMI sink devices.

4. Connect 12V/3A power supply to DC power socket.

5. Power on the AC-MXMV122-UHD, TV and other devices.

AC-MXMV122-UHD

pg. 1

AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ [email protected]

pg. 1

AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ [email protected]m

pg. 6

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Controlling the AC-MXMV122-UHD

1. To select the input for the desired output port:

Press any IN1, IN2, IN3 or IN4 button will seamlessly change the source of Output 1 or Output 2 to the

selected input.

2. To select source type for the input groups:

Press HDMI or VGA or YPbPr or AV and then press the input button IN1, IN2, IN3 or IN4, and the input group

will change the input to the selected HDMI or VGA or YPbPr or AV (CVBS) input.

3. Use the 2K QV button to set the desired output port to output 1080P quad-view, or use the 4K QV button to

set both outputs to 4K quad-view on a 4K screen.

4. The 4 buttons (A, B, C, D) set both outputs to multi-viewer mode, with both displays showing the same image.

These 4 buttons set the AC-MXMV122-UHD to output one main picture with the other three inputs shown in

PIP mode. Repeated presses of the same button cycles the main and PIP images through the four inputs.

Front:

AC-MXMV122-UHD

pg. 1

AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproconnect.com

The AC-MXMV122-UHD can be cascaded to create a larger system such as an N input seamless switcher, Nx2 seamless

matrix or MxN Multiviewer. The RS232 control signals can also be cascaded by using an RS232 cable from the pass

through RS232 port to the RS232 input port of the next AC-MXMV122-UHD. When more than one AC-MXMV122-UHD

connected in a cascaded RS232 control chain, each AC-MXMV122-UHD must have unique (different) Serial

Communication address.

Each address can have a binding note, which has at most 10 characters. After the address table is saved, they can be

selected using the address selection on main menu for control and management.

pg. 7

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

AC-MXMV122-UHD UART COMMANDS

UART SETTING

115200 bps, 8 data bits, no parity, 1 stop bit, no flow control.

Command format

Header Length Group

address

Device

address

Key

word

Parameter Check

sum

Value AA/AB Device

Number of all bytes after this

parameter, including the

checksum

See

note(1)

See

note(1)

See

note(2)

Based on the

keyword

Check

sum

See

note (3)

Byte

Count

1 2 (LSB

first)

2 (LSB first) 1 1 2 (LSB

first)

Based on the

parameter

Table 1 - Command Format

Note:

(1) Each AC-MXMV122-UHD in a cascaded system must be assigned a unique two byte address. The first

byte is the Group Address, the second byte is the Device Address. The two values 0x00 and 0xff are

invalid for both the Group Address and the Device Address respectively.

(2) The default Device ID is 0002H.

(3) All data values are transmitted in HEX mode.

(4) The checksum value is the negated sum of all values before the Checksum field.

The first byte of the header denotes the type of data: AAH for a command to the AC-MXMV122-UHD, or ABH for a reply

from the AC-MXMV122-UHD.

The next two header bytes are the device ID where:

XX: is in the range 01H~FEH, and YY: is in the range 01H~FEH

The following table lists the ID values that should only be used for the described purpose:

Group Addr Device addr Description Reply From

00H FFH Invalid No reply

XXH FFH Broadcast to all the devices with the group address of XXH No reply

FFH FFH Broadcast to all devices No reply

00H 00H Broadcast to all devices All devices

XXH 00H Broadcast to all the devices with the group address of XXH All in group

FFH 00H Invalid No reply

00H XXH Invalid No reply

FFH XXH Invalid No reply

XXH YYH Send data to the device with the address XXYYH One device

Table 2 - Addressing the AC-MXMX122-UHD

AC-MXMV122-UHD

pg. 8

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

Keyword Description of

Keyword

Length of Parameter Description of

Parameter

Note

WRITE SETTINGS COMMANDS

The following commands can only be used while in MODE1 (HD MV)

0000H Set display

parameter (top-

left and bottom-

right coordinates

and display

priority) for all 4

inputs

36 BYTES Refer to Table 4 Not

recommended,

use the next 5

commands to

set the

parameters

individually

0001H Set display priority

of the 4 input

images.

4 BYTES Refer to the

data from 1 to

4 in Table 4

0002H Set the coordinate of

the image with the

highest priority

8 BYTES Refer to the

data from 5 to

12 in Table 4

0003H Set the coordinate of

the image with the

second priority

8 BYTES Refer to the

data from 12 to

20 in Table 4

0004H Set the coordinate

of the image with

the third priority

8 BYTES Refer to the

data from 21 to

28 in Table 4

0005H Set the coordinate

of the image with

the lowest priority

8 BYTES Refer to the

data from 29 to

36 in Table 4

0050H Set the

transparency

1 BYTE Refer to Table 5

0051H Background colour 3 BYTES Refer to Table 6

The following commands can only be used while in MODE2 (4:2 MX)

1000H Set the source for

the two output

ports

2 BYTES Refer to Table 7

The following commands can only be used while in MODE3 (4K)

2000H 4KMV or the

source of single

1080P output

2 BYTES Refer to Table 8

The following commands can only be used while in MODE1 & MODE3

2820H Set audio route

when in MV mode

2 BYTES Refer to Table 9

2852H Color of the image

border

3 BYTES Refer to Table 6

2853H Width of the

image border

1 BYTE Refer to Table

The following commands can only be used while in MODE1 & MODE2 & MODE3

3800H Select input video

source for the four

inputs

4 BYTES Refer to Table

AC-MXMV122-UHD

pg. 9

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

keyword Description of

keyword

Length of parameter Description of

parameter

Note

3810H Select input audio

source for the four

inputs

4 BYTES Refer to Table

3838H Program EDID for

HDMI Input or

VGA Input

256 BYTES Refer to Table

3840H Select internal

EDID for input

HDMI or VGA

3 BYTES Refer to Table

3852H Recall Demo Mode 1 BYTE Refer to Table

3857H Save User screen

mode (Type 2)

1 BYTE Refer to Table

3858H Recall User screen

mode (Type 2)

1 BYTE Refer to Table

3859H Set Demo Mode

list

22 BYTES Refer to Table

The following commands can be used in ALL MODES

7800H Set the system

operating mode

1 BYTE Refer to Table

7801H Set the device

address

2 BYTES Refer to Table

7820H HDCP DEBUG 1 BYTE Refer to Table

7802H Factory reset

settings

0 BYTES

READ STATUS COMMANDS

The following commands can only be used while in MODE1

8000H Read coordinate and

display priority of 4

images

0 BYTES MCU will reply

base on Table 4

8050H Read transparency 0 BYTES MCU will reply

base on Table 5

8051H Read background 0 BYTES MCU will reply

base on Table 6

The following commands can only be used while in MODE2

9000H Read source of the

two output ports

0 BYTES MCU will reply

base on Table 7

The following commands can only be used while in MODE3

A000H Read 4K/single

1080P source

0 BYTES MCU will reply

base on Table 8

The following commands can only be used while in MODE1 & MODE3

A820H Read audio route

when in MV mode

0 BYTES MCU will reply

base on Table 9

A852H Read colour of

image border line

0 BYTES MCU will reply

base on Table 6

AC-MXMV122-UHD

pg. 1

AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ sup[email protected]

pg. 10

AVProEdge ~ 2222 E 52nd St N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~ support@ .com

Other manuals for AC-MXMV122-UHD

Table of contents

Other AVPro Edge Controllers manuals

AVPro Edge

AVPro Edge AC-MXMV122-UHD User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual