AVIATION DESIGN - ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - aviation.design@wanadoo.fr – www.adjets.com
2
INTRODUCTION
Angel is our new jet trainer. It is fully composite, delivered assembled and painted.
It is designed for jet beginner with following objective :
- Very easy to fly.
- Short take off and landing due to big airfoil thickness (13%), large flaps and low wing loading
- Very fast assembly
- Easy access to engine (top engine, no hatch, no exhaust pipe)
- Easy access to fuel tank , ECU and radio with a large fuselage hatch
- Easy radio installation with big fuselage hatch and servo cover supplied
The Angfel
AngfelAngfel
Angfel is fully molded in composite material.
The model comes to you finished, fully molded in composite material and painted in mold. All
bulkeads are glued. All control surfaces are hinged. No gluing are required. This model has plug in
wings, stabs and fin booms for an easier transport.
All necessary hardware are included in the parcel
Assembly require only few hours to fit engine and radio.
Angel ARF
Angel ARFAngel ARF
Angel ARF model includes :
- High quality epoxy-glass fuselage painted.
- All plywood and wood parts premounted.
- Fully molded wings with winglets, stabs and fin booms painted
- High tensile aluminum wing joining tube.
- Access hatch requiring no additional framework.
- All hardware (screws, servo cover, ...)
- Instructions in English with pics.
Parts required to complete the kit :
- 3.2 liters kevlar fuel cell
- 1 liters kevlar smoker cell
- Clear canopy
- Deluxe retractable landing gear with special CNC oleo legs and
wheels set on bearing + brakes
DISCLAIMER
AVIATION Design assumes no liability for the operation and use of these products.
The owner and operator of these products should have the necessary experience and exercise
common sense. Said owner and operator must have a valid Model Airplane licence and insurance as
required.
