1
23
4
Installation of the AURATON RT receiver
CAUTION! The cables delivered in a set
together with the controller are suitable
for maximum loads equal to 2.5 A.
If devices with higher power are connect-
ed, the cables should be replaced with ones
NOTE: When installing an AURATON RT receiver,
The receiver should be installed by a professional.
clamp
NOTE: In the permanent system of the building
there must be a switch and an overcurrent pro-
NOTE: -
-
nected from the controllers. The cables may be
-
back of the receiver if the cables are extended
from the wall. In order to connect the cables
from the back, the cover must be broken out.
1.
AURATON RT receiver by unscrewing the
screws half way out.
2.
(normally opened) terminals are used the
3. -
AURATON RT receiver, in observance of safety
rules.
4.
and the covers must be screwed back to the
AURATON RT receiver.
!
