AUDAC PX108 Installation and operating instructions
PROFESSIONAL AUDIO EQUIPMENT
Speaker Cabinet PX108
User Manual &
InstallationGuide
Speaker Cabinet
PX108
AUDAC
2
Warning
Use only the correct amplifier output voltage and impedance, exceeding these limits could
cause fire or other failures.
Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles.
Only install the speaker in locations that can structurally support the weight of the speaker and
the mounting bracket. Not doing this may result in the speaker falling down.
Do not use any other method than specified to mount the bracket (the mounting bracket that
is specified for this speaker is the MBK108). If extreme force is applied to the speaker, the
speaker could fall down.
Attach a safety wire to the speaker when the speaker is mounted high above the ground.
Failure in doing so could cause the speaker to fall down for any reason.
Only use fixing materials that are appropriate for the ceiling’s or wall’s structure and
composition. Failure to do so may cause the speaker to fall down.
Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after
installation to prevent accidents.
Avoid mounting the speaker in locations exposed to constant vibrations. The mounting
bracket can be damaged by excessive vibrations, potentially causing the speaker to fall down.
3
Caution
Avoid electric shocks: switch off the amplifier power when connecting the speaker.
Avoid installing the speaker in locations exposed to solvents, acids, smoke and heaters, as
excessive exposure to these factors could result in speaker failure, fire or electric shock.
Do not operate the speaker for an extended period of time at distorted sound. This could
cause (irreparable) damage to the speaker.
Do not stand or sit on, nor hang down from the speaker as this may cause the speaker to fall
down or drop.
Appearance
4
Installation
Install the speaker with the mounting
bracket MBK108 in an appropriate
location. Tighten them with nuts and bolts.
To adjust the directivity of the speaker, you
loosen the bolts at the top and bottom of
the mounting bracket. Then you can
position the speaker. Afterwards, tighten
the bolts firmly.
Connections
Plug the speaker cable into the socket at the
backside of the speaker.
Use speaker connections with the speaker
cable attached at +1,-1 of the connector.
5
Specifications
RMS Power 150 Watt
Max Power 300 Watt
SPL (1W/1M) 95 dB
SPL (Max/1m) 117 dB
Frequency Response -3 dB 95-18000 Hz
Frequency Response -10 dB 70-20000 Hz
Horizontal Coverage 90°
Vertical Coverage 60°
HF Driver 1 inch
LF Driver 8 inch
Crossover Frequency 2500 Hz
Impedance 8 Ohm
Dimensions (WxHxD) 295x505x305 mm
Weight 13.5 Kg
Mounting MBK108 (optional)
Color Black
Table of contents
Other AUDAC Speakers manuals
AUDAC
AUDAC VEXO 8 Guide
AUDAC
AUDAC CELO2D Guide
AUDAC
AUDAC WX802 Installation and operating instructions
AUDAC
AUDAC BASO10/B Guide
AUDAC
AUDAC CELO5 Guide
AUDAC
AUDAC CALI Series User manual
AUDAC
AUDAC HS212MK2 Guide
AUDAC
AUDAC VEXO1A Series User manual
AUDAC
AUDAC AWP06 User manual
AUDAC
AUDAC CS85 Installation and operating instructions
AUDAC
AUDAC VIRO5 User manual
AUDAC
AUDAC XENO 6 Guide
AUDAC
AUDAC CS85 Installation and operating instructions
AUDAC
AUDAC XENO 8 Guide
AUDAC
AUDAC WX502 Installation and operating instructions
AUDAC
AUDAC SPRING-FIT CENA506 User manual
AUDAC
AUDAC HS208MK2 Guide
AUDAC
AUDAC NELO706V Series User manual
AUDAC
AUDAC Ateo 4D Guide
AUDAC
AUDAC MERO6 Guide
