AUDAC KYRA24 Guide

KYRA24

User & Installation

Manual

www.audac.eu

Introduction

Design column speakers

The KYRA column speakers range is the elegant result of research in the field of phased

array acoustics. The selection of the highest quality materials including aluminum cone

2” drivers guarantee an extraordinary detail and clarity for music and speech, which is

uncommon for any kind of column speaker available from the market. It makes them

perfectly lend themselves to a wide variety of applications in acoustic difficult environ-

ments such as churches, auditoriums, presentation and meeting rooms where audibility

and intelligibility of music and speech have the highest importance.

They are housed in slim and elegant constructed enclosures made out of aluminum

materials and finished with finely perforated grilles. An included mounting bracket with

minimum distance to the wall allows swivelling and down-tilting for perfect directional

placement.

They come in three different models (KYRA6, KYRA12 and KYRA24) in terms of length

and driver count, all are constructed with the identical high-quality aluminum cone full

range drivers. Each of them with their specific pattern in terms of dispersion and throw

distance. They offer solutions for uniform acoustic performance in any type of system

in reverberant venues, while reducing echo and microphone feedback to optimizes the

intelligibility of music & speech.

The KYRA24 design column speaker consists of 24 x 2” high-quality aluminum cone full-

range drivers, delivering extraordinary clarity and detailed sound. The overall continuous

power handling reaches 240 Watt with a maximum power of 480 Watt and the overall

impedance of 4Ωallows it being connected to any low impedance power amplifier.

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER

THROW THEM AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON

TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS

OR OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,

HEAT, MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY

SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE

SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE

SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL

DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,

INFORM YOUR VENDOR IMMEDIATELY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further

relevant specifications described in following directives: 2014/30/

EU (EMC) and 2014/35/EU (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular houshold waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the KYRA

Mounting the speaker

Every KYRA speaker comes delivered with a two-way revolving bracket, making it

possible to install the speaker at each position and focusing it into the desired direction.

The metal constructed bracket ensures a solid and secure mounting of the loudspeaker

to any possible location.

It consists of two different parts, whereof the first part should be installed to the rear side

of the loudspeaker. It can be assembled on different heights on the rear of the speaker,

depending on the mounting possibilities and required installation height. It is fixated to the

loudspeaker cabinet by inserting the 2 supplied mounting screws into the pre-drilled and

threaded holes at the back of the speaker cabinet. The KYRA24 comes with two different

speaker parts included, which can be selected depending of the required incline angle.

The second part is a wall plate which has to be fixed to the wall by at least four screws

(preferably six). The type of used fasteners shall be chosen according to the most

suitable type for the mounting surface (brick, concrete, wood, ...). The mounting holes

are provided according to the positions indicated in the following drawing.

336

Once both speaker part and wall part are safely attached to their positions, the protective

finishing cover can be assembled over the wall plate by clicking it. Afterwards the speaker

can be assembled to the wall bracket by bringing both parts together and tightening them

through the button head bolt and nuts together through an hex drive key. The upper one

can be used for adjusting the tilt-angle of the speaker.

6,5°

42°

Once installed, the speaker can be can be panned and tilted, focussing the loudspeaker

into the desired listening direction. This is useful when the installation height on the wall

is limited or the speaker is mounted from the side. Depending on the selected speaker

part, the downward tilting angle can be adjusted within a range of 0° and 6.5°, or within

a range of 6.5° and 13°. The maximum pan in both directions is 42°.

Connecting the speaker

For connecting the KYRA24, the wires coming from the amplifier shall be connected

to the 3-pin terminal block connector on the rear of the speaker. The polarity and pin

designation is indicated on a label attached to the rear of the speaker and shown in the

image below:

COM

4 Ω

Additional Information

Technical specifications

KYRA24

Max Power 480 Watt

RMS Power 240 Watt

Nominal impedance 4 Ohm

Drivers 24 x 2” Alu cone full range

Cross-over network Passive built-in (low-cut filter)

Connectors 3-pin Terminal block (5.08 mm)

Mounting bracket 2-Way revolving metal bracket

Construction Alu extrusion + plastic caps

Front finish Fine perforated steel grill

Ingress protection IP3x

Operation temperature range -20°C to +50°C

Incline angle Horizontal 0 ~ 42° left & right

Vertical 0 ~ 6.5° and 6.5° ~ 13° down tilt

Colour White KYRA24/W (RAL9003)

Black KYRA24/B (RAL9005)

Dimensions (W x H x D) 70 x 2006 x 101 mm (excl bracket)

Weight 6.5 Kg

Packaging Carton box

Shipping weight & Volume 10.5 Kg - 0.067 Cbm

Accessories included 3-pin terminal block connector

2-Way revolving metal bracket

Cable guiding accessories

Notes

This manual suits for next models

Table of contents

Other AUDAC Speakers manuals

AUDAC

AUDAC CS55 Installation and operating instructions

AUDAC

AUDAC CS74 User manual

AUDAC

AUDAC CS85 Installation and operating instructions

AUDAC

AUDAC CS85 Installation and operating instructions

AUDAC

AUDAC CSE55 Installation and operating instructions

AUDAC

AUDAC BASO10/B Guide

AUDAC

AUDAC VEXO208 User manual

AUDAC

AUDAC CS75B User manual

AUDAC

AUDAC SPRING-FIT CENA306 User manual

AUDAC

AUDAC VEXO1A Series User manual

AUDAC

AUDAC Ateo 2 Guide

AUDAC

AUDAC WS624 User manual

AUDAC

AUDAC BASO Series Guide

AUDAC

AUDAC AWP06 Installation and operating instructions

AUDAC

AUDAC MERO2 Guide

AUDAC

AUDAC VEXO112A User manual

AUDAC

AUDAC CELO8 Guide

AUDAC

AUDAC AWP06 User manual

AUDAC

AUDAC NELO706V Series User manual

AUDAC

AUDAC WX502 Installation and operating instructions

AUDAC

AUDAC HS208MK2 Guide

AUDAC

AUDAC ATEO2D Guide

AUDAC

AUDAC SPRING-FIT CENA506 User manual

AUDAC

AUDAC ATEO M Series User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide