Atis AW-CAR40VF User manual
AW-CAR40VF
Caution for Installation
1. Resistor A: If you want to change the intensity of the IR light, please open the
cover at the bottom of the camera(As showed in the following picture), you can
adjust the IR light intensity.
2. Resistor B: If you want to change the working time of IR Led, please open the
cover at the bottom of the camera(As showed in the following picture), you can
adjust the IR LED working time.” – “refers to the IR LED will start working under
the darker situation. “+” refers to the IR LED will start working under the brighter
situation.
Packing
1. Camera X1
2. User Manual X1
3. Screw X4
4. Plastic-Conical-Anchor X4
5. Mounting drawing paper X1
6. Hexagonal Wrench X1
Specification
IP Rating
IP66
Type
Monochrome
Signal System
NTSC/PAL
Pick Up Device
1/3" 760H CCD
Picture Elements
NTSC:811H×508V; PAL:795H×596V
Resolution
550TVL
Min Illumination
0Lux（80 Pieces IR LED ON）
Vertical Frequency
NTSC:60Hz; PAL:50Hz
Horizontal Frequency
NTSC:15.734KHz; PAL:15.625KHz
Clock Frequency
NTSC:28.636MHz; PAL:28.375MHz
Scanning System
2:1 Interlace
S/N Ratio
≥50dB
Lens
9-22mm Varifocal Auto iris IR Lens
White Balance
AUTO Tracking
Back Light
ON
Auto Gain Control
ON
GAMMA
0.45
Video Out-put
1V p-p,75Ω
Power Supply
DC12V ±10%
Current Consumption
200mA(Max)
IR Effect Distance
2~15m（6.56~49.18ft）(Outdoor)
Dimension
305×124×198mm (12.01”×4.88”×7.79”)
Weight
1750g (61.72oz)
Storage Temperature
-30～+60℃(-22～+140℉)
Operating Temperature
-30～+40℃(-22～+104℉)
Remark:Non-regulativeadaptormay cause camera damaged.
Number Plate Capture Camera
www.bezpeka-shop.com
AW-CAR180VF
Specification
IP Rating
IP66
Filter
Five Layers Filter
Image Sensor
1/3”960H CCD
Pixels
NTSC:811H×508V;PAL:795H×596V
Horizontal Resolution
700TVL
LED
4 Pieces High Power IR LED
Vertical Frequency
NTSC:60Hz PAL:50Hz
Horizontal Frequency
NTSC:15.734KHz;PAL:15.625KHz
Clock Frequency
NTSC:28.636MHz;PAL:28.375MHz
Scanning System
2:1 Interlace
S/N Ratio
≥50dB
Electronic Shutter
Fixed
Lens
10-40mm Varifocal Auto Iris IR Lens
Viewing Angle
Horizontal: 27°～8°
White Balance
ATW
Back Light
Compensation
ON
AUTO Gain Control
ON
Gamma
0.45
Video Output
1Vp-p ,75Ω
Power Supply
DC12V±10%
Current Consumption
1500mA (MAX)
IR Effect Distance
5-30M (16.39-98.36ft)
Dimension
492×140×260mm （19.37”×5.51”×10.24”）
Weight
2520g
Storage Temperature
-30～+60℃
Operating Temperature
-30～+40℃
Package
4Pcs/CTN 15.6KGs
485×580×425mm(19.09”×22.83”×16.73”)
www.bezpeka-shop.com
Caution for Installation
1. Please do not install the camera where the vibration always happens, or the
camera will be damaged.
2. Please keep the glass in front of the camera clean. Do not touch it directly. You
can use a soft cloth with alcohol to wipe if necessary.
3. The available IR range of this camera is shown in the specification. Please be
sure to place the camera in the working distance when it works.
4. In order to prevent short circuit, please do not loosen any screws in the
camera at random.
5. Please do not let the camera work in the conditions which is beyond the most
extreme and demanding of operating conditions and climates shown in the
specification. When any abnormalities happen, please turn off the camera and
contact your local dealer or us right away.
Pay attention to the setting angle. The picture in the right is for your reference.
www.bezpeka-shop.com
This manual suits for next models
1
Other Atis Security Camera manuals
