Atdec Levitate Operation instructions

Arm Configurations

For your comfort and safety please

take a few moments to adjust the

position of your monitor.

To adjust the Levitate Monitor Arm

please refer to the instructions overleaf.

atdec.com.au

Due to continuing product development, the manufacturer

reserves the right to alter specifications without notice. 15/04/2011©

For maximum flexibility, position the Levitate Monitor Arm depending on

your requirements:

Maximum Height

Typical application: Sit-to-Stand

Compact

Typical application: Desktop/Workstation

Maximum Reach

Typical application: Touch Screen

For additional information including video demonstrations

logon to atdec.com.au or levitatemonitorarm.com

For your com

and sa

ake a

ew m

ents to adjust t

positi

your monitor

To a

just t

e Levitate Monitor Arm

er to the instructions overlea

nal in

ormation including vi

deo

monstrations

dec.co

.au

vit

oni

tor

arm

.com

User Operating Guide

Please do not

remove guide from

the Levitate Monitor Arm

Positioning Desk Clamp

Attaching Quick Release Head

Adjust Spring Tension

Mounting Head

Quick Release

Coupling

PUSH

Security Screw

Security

Washer

DO NOT

OVER TIGHTEN

When using the Desk Clamp, ensure that it is secured towards the rear of the work surface.

DO NOT OVER-HANG

FROM FRONT OF WORK

SURFACE

ATTACH TO REAR OF

WORK SURFACE ONLY

This puts excess pressure on

the clamp, and may cause

damage.

Adjust Pan and Tilt Tension

PUSH

LOCK

press in white

outer button

UNLOCK

press in black

inner button

1Ensure that quick release buttons are in the

UNLOCK position (see below).

2Align and locate the Mounting Head onto the

Quick Release coupling. Once in position,

press in white outer button to LOCK.

3Insert Security Screw (optional)

OR Head Cap.

Head Cap

Lower

Tension Bolt

Upper

Tension Bolt

TENSION

LESS

TENSION

Lower Arm

Upper Arm

5mm Allen

Key

If necessary adjust the Head Swivel Tension

using the 2mm Allen Key supplied.

Depending on the weight of the monitor,

make adjustments to the Head Tilt Tension

using the 5mm Allen Key supplied.

Starting with the Lower Arm, tighten the Tension Bolt until the Arm

comfortably holds its position wherever it is moved.

Once satisfied, repeat the process for the Upper Arm.

TENSION

LESS

TENSION

2mm Allen

Key

TENSION

LESS

TENSION

5mm Allen

Key

TIP: Do not over tension! Arms should move freely, and support the weight of the monitor

in any position. Depending on your requirements the arms can be tensioned to provide

independent movement.

Other Atdec Rack & Stand manuals

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 