Atdec AWM-BT User manual

AWM-BT Page 1 of 3

Installation Guide

AWM-BT

AWM Tilt Bracket

COMPONENT CHECKLIST

REQUIRED TOOLS

CAPACITY

Flat Monitor

4.5 - 25kg (10 - 55lb)

Curved Monitor

4.5 - 18kg (10 - 40lb)

Display Size

24” - 55”

• Phillips Head Screwdriver

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! EachTiltBracketsupportsamaximumweightasperabovecapacityspecication.

! Avoidapplyingdownwardloadtocornersofdisplay.

! Thisproductisnotsuitableforoutdooruse.

! Donotusethisproductformobileapplications.

! The manufacturer accepts no responsibility for incorrect installation.

! This product is compatible with Atdec AWM Series products.

! VESAmountedaccessories(suchasminiPCbracketsandmounts),andoffsetVESAlocationsexertadditionalleverage

thatcanexceedthecapacityofthemounteventhoughthemonitorweightmaybewithinthestatedrange.Pleasecontact

Atdecifyouwouldlikefurtherinformation.

! WARNING!Deathorseriousinjurymayoccurifachildclimbsonortipsproduct.

Bracket

(x1)

VESA Plate

(x1)

M4x10mm

Screw

(x4)

M4x20mm

Screw

(x4)

10mm

Spacer

(4x)

4mm

Hex Key

(x1)

300mm (12”) max

overall display depth

AWM-BT Page 2 of 3

2. Slide bracket onto post and set height

2.2Lineuptheinnerguide

onrearofbracketwithrear

channelonpost.

VIEW FROM ABOVE

2.3 Slideinnerguide

intochannelandlower

bracket.

2.1 Tiltbracketmustonlybe

attachedwithdisplayfacingthe

frontofthemountingsurfaceunless

xingisGrommetClamp(AC-GC).

2.4Firmlytighten

handknobat

chosenheight.

1.1 VESA compatibility Option A Attach VESA

plate with M4x10mm

screws.

Option B For recessed

VESA use 10mm spacers

andM4x20mmScrews.

1. Attach VESA plate to display

75mm

100mm

75mm

100mm

For 75mm VESA

unscrew 5mm to

access top holes.

NOTE:

SomedisplaysrequiretheuseofaVESAadapter

beforeattachingtheVESAplate.ThisVESA

adaptermayshipintheboxwiththedisplay.

Consultyourdisplay’sinstallationguidefor

furtherinformation.

TOP

TIGHTEN

Back of

work

surface

Inner guide

positioned

in rear post

channel

AWM POST

(not supplied)

Arrow side

towards user

AWM POST

(not supplied)

Arrow side

towards user

WORK

SURFACE

AWM-BT Page 3 of 3

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

5. Fine adjustment

3. Attach display

4. Set tilt

3.1 Set VESA plate

clips to open position.

WARNING:

Use two people to

install display

NOTE:

Display hangs from the

bracket like a painting.

After clips are closed, if

corners of the screen are

pushed downwards, rocking

movement is expected.

3.2 Liftdisplay

untilVESAplateis

above the height

ofthebracket.

3.3 Withpostcentered

slowlylowerdisplayuntil

baronVESAplatesitsin

saddleinbracket.

3.4 Set VESA plate

clips to closed position.

4.1 Adjust display tilt

angle by gripping edges

of screen and rolling up or

down to desired position.

4.2 Tighten tilt knobs

to set.

5.1 Tocorrecthorizontalangle

ofdisplay+/-3°:

Turnasingleneadjustment

knobtoadjustangleofdisplay.

5.2 Toclosesmallgapbetween

displays+/-6mm(1/4”):

Turnbothneadjustment

knobs-alternatingsidesafew

rotationsatatime.

OPEN

WARNING:

Do not loosen

hand knob once

display mounted�

CLOSED

WARNING:

Ensure clips

closed before

tilting

Clockwise = More friction

Anti-clockwise = Less friction

OPTIONAL ADJUSTMENT

- TILT FRICTION

4mm hex key can be used to reduce

tilt friction (for light screen) or

increase tilt friction (for heavy screen).

TILT

KNOBS

Clockwise=Higher

Anti-clockwise=Lower

FINE HEIGHT ADJUST

FINE ADJUSTMENT

KNOBS

NOTE:

Ensure slide clips in

CLOSED position

Other Atdec Rack & Stand manuals

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 