Atd models Stone Workshop ATD010 User manual

ATD010 - OO (1:76 Scale) Stone Workshop

- Instruction Manual

Tools Required

Modellers Knife (with a fresh blade)

Cutting Mat

Modelling Glue (we recommend Deluxe Materials Roket Card Glue)

Fine Tip Applicator

Low-tac Masking Tape

Clips / Clamps

Tips

Prior to starting your build, we recommend reading through the instructions to familiarise

yourself with the build style of the kit.

We recommend painting any white edges as you remove the components from the sheet to

improve the nished look. We advise watercolour paints for the best nish.

Each component is held in the sheet using score lines, indicated by a scissor symbol. To remove

the component from the sheet, carefully run the tip of your modelling knife through the score line.

Remove each component as it is required to prevent losing or mixing it up with another component.

Ensure that glue is distributed evenly and not too close to the edge as it may ooze out when

pressure is applied.

Use low-tac masking tape, clamps and weights to aid the assembly process.

1. Detach Wall A and place it face down on your work surface. Then fold the tabs over on themselves

and glue. Repeat this step for Wall B.

Apply rm pressure on the tabs until the glue is semi cured to stop them from lifting.

3a. Locate the Glazing Sheet, cut out the windows and then glue them into position, as per the

illustation below.

Ensure that you cut out the glazing along the outer black lines. This will allow an overhang on each

piece of glazing making them easier to glue into position.

2a. Detach Wall E and glue it to Wall A.

The window openings on Wall E are slightly

smaller than the window openings on Wall A.

2b. Detach Wall F and glue it to Wall B.

The window openings on Wall F are slightly

smaller than the window openings on Wall B.

i i

3b. Detach one of the doors (we’ve given two

colour options) and glue it to the inside of

Wall A.

We have scored the doors giving you the

option to have them open by carefully

running the blade across the score lines.

4. Fold the tabs on Wall C inwards by 90 degrees. Repeat this step for Wall D.

5a. Detach Wall G and glue it to Wall C.

Ensure there is an even gap between the

crease lines on component C and the edge

of Wall G.

5b. Detach Wall H and glue it to Wall D.

Ensure there is an even gap between the

crease lines on component D and the edge

of Wall H.

i i

6c. Glue Wall B to the tabs on Wall C and D. 7. Detach Wall I and glue to the inside of the

building. Repeat this step for Wall J.

6a. Glue the tab on Wall C to Wall A, as per the

illustration below.

6b. Glue the tab on Wall D to Wall A, as per the

illustration below.

8. Now turn the building on its side. Detach the

Ground Floor and glue it into the building.

You will notice that there are notches

cut out in the wall that will align with the tabs

on the oor like a jigsaw. There is no tab

where the oor sits behind the door.

You may nd it easier to apply glue inside

the notches before positioning the tabs.

9a. Detach the Ground Floor Chimney Breast

and then fold it along the crease lines.

9b. Glue the Chimney Breast into position, as

per the illustration below.

10. Detach the 1st Floor and glue it into position.

You will notice that there are notches

cut out in the wall that will align with the tabs

on the oor like a jigsaw. Before glueing the

component into position, ensure that the

notches line up with their corresponding tabs.

You may nd it easier to apply glue inside

the notches before positioning the tabs.

11a. Detach the chimney inlls and fold, as per the

illustration below.

11b. Detach the 1st Floor Chimney and fold the

upper tabs, as per the illustration below.

11c. Glue the inlls into position, as per the

illustration below.

11d. Fold the lower tabs, wrapping them around

the inlls and glueing together.

12. Glue the Chimney Breast into position, as

per the illustration below.

13. Detach the trussing (x2). Carefully glue them

together, back to back. Repeat this step for

the remaining trussing.

14. Glue the Trussing into position, as per the

illustration below.

15. Fold the chimney stack along the crease lines

and glue into position.

You have now completed the Stone Workshop. We hope you enjoyed and

successfully built the kit! To view our other card kits, more products and nd your

local stockist, visit www.atdmodels.co.uk

We’d love to see photos of your nished models. Please send them to

[email protected] for a chance to be featured on our social media pages.

16. Apply a bead of glue across the tops of the

walls. Then detach the roof and position it on

top of the building.

We recommend using ATD low-tac masking

tape to assist on this step whilst the glue

cures.

17. Detach the capping stones and place them

face down on your work surface. Glue

the smaller component, ensuring that it is

centre aligned.

18. Apply a bead of glue across the top of the

chimeny stack and then position the capping

stone face up, as per the illustration below.

Other atd models Toy manuals

atd models

atd models ATD008 User manual

atd models

atd models ATD015 User manual

atd models

atd models ATD002 User manual

atd models

atd models Stone Boiler House and Chimney ATD011 User manual

atd models

atd models ATD007 User manual

atd models

atd models ATD016 User manual

atd models

atd models ATD032 User manual

atd models

atd models ATD033 User manual

atd models

atd models ATD003-00 User manual

atd models

atd models ATD022 User manual

atd models

atd models ATD014 User manual

atd models

atd models ATD021 User manual

atd models

atd models ATD013 User manual

atd models

atd models ATD005 User manual

atd models

atd models ATD001 User manual

Popular Toy manuals by other brands

marklin

marklin 37321 instruction manual

Canon

Canon PAPER CRAFT Assembly instructions

GREAT PLANES

GREAT PLANES Pitts M-12S instruction manual

NOCH

NOCH 14261 manual

Hausler

Hausler 450 SE V2 quick start

Dynaflite

Dynaflite Daydream instruction manual

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Build instructions

Kenner

Kenner Batman 63651 instructions

LEGO

LEGO 8527 instructions

iKarus

iKarus ECO 8 Assembly instruction

Multiplex

Multiplex EasyStar II Building instructions

Walkera

Walkera 38 User handbook

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE manual

MD MXION SWD user manual

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway instructions

marklin

marklin 39671 user manual

Meccano

Meccano 15103 instructions

LEGO

LEGO TECHNIC 8735 instructions

atd models Stone Workshop ATD010 User manual

Popular Toy manuals by other brands