Asus EA-N66 User manual

Ethernet Adapter

Wireless-N

Dual-band

Quick Start Guide

EA-N66

Ethernet Adapter

Dual-band Wireless-N

English............................................. 4

Français ........................................... 11

Español............................................ 18

Português do Brasil..................... 25

Português....................................... 32

Q7020 / First Edition / January 2012

English

A quick look

1) Ethernet port

2) DC In port

3) LED indicator

OFF: No power or physical connection

Solid light: Excellent connection

Blinking fast: Active connection

Blinking slow: connection

4) Air vent

5) Mounting hole

6) WPS button

7) Reset button

345

7 6

English

Mounting options

Out of the box, the ASUS EA-N66 is

designed to sit on a raised at surface like

a le cabinet or book shelf. The unit may

also be converted for mounting to a wall

or ceiling.

1. Look on the

underside for the

mounting hook.

2. Mark an upper

hole in a at

surface.

3. Tighten one screw

until only 1/4’’is showing.

4. Latch the hook of your EA-N66 onto

the screw.

Package contents

EA-N66 Power adapter

Network cable Quick Start Guide

NOTE: If any of the items is damaged or

missing, contact your retailer.

NOTES:

• Re-adjust the screw if you cannot latch

EA-N66 onto the screw or if it is too

loose.

• The screw is not included in the

EA-N66 package contents.

English

Getting started

1. Connect to a wireless network.

A. Connecting via the WPS button

The WPS (Wi-Fi Protected Setup) button

allows you to connect to a secured and

protected network.

2. Press WPS

button on

the router.

1. Press the

WPS button

on EA-N66.

English

B. Connecting via a network cable

a: Insert your EA-N66’s AC adapter to

the DC-In port and plug it to a power

outlet.

b: Using the bundled network cable,

connect your computer to your

EA-N66’s LAN port.

EA-N66

Power

Wall Power Outlet

LAN

2. Log into the EA-N66's web

graphics user interface (web

GUI).

a: Ensure that the wireless LED is

blinking.

Wireless LED

b: In your web browser, key in www.

asusrouter.com. Key in admin as the

default username and password.

c: From the web GUI, select the

operation mode and congure its

settings for your wireless network

setup.

English

NOTE: If the web GUI does not launch,

refer to the Frequently Asked Questions

section.

Operation modes

ASUS EA-N66 provides three operation

modes: Ethernet Adapter, Access Point

(AP), and Repeater.

NOTE: Please follow the GUI Setup Wizard

for these modes.

Ethernet Adapter mode

By default, EA-N66 is set to the Ethernet

Adapter mode. In this mode, you can con-

nect any Ethernet-enabled device to your

wireless home network via the wireless

router. This mode is perfect for home

theater devices such as the Internet TV,

TiVo, and Blu-ray player.

Internet TV

ADSL/

Cable

modem

English

Frequently Asked Questions

Q1: I cannot access the web GUI to

congure the EA-N66 settings.

• Close all running web browsers and

launch again.

• Follow the steps below to congure

your computer settings based on its

operating system.

Windows 7

A. Disable the proxy server, if enabled.

1. Click Start > Internet Explorer to

launch the web browser.

2. Click Tools > Internet options > Con-

nections tab > LAN settings.

3. From the Local Area Network (LAN)

Settings screen, untick Use a proxy

server for your LAN.

4. Click OK when done.

B. Set the TCP/IP settings to automati-

cally obtain an IP address.

1. Click Start > Control Panel > Net-

work and Internet > Network and

Sharing Center > Manage network

connections.

2. Select Internet Protocol Version 4

(TCP/IPv4), then click Properties.

3. Tick Obtain an IP address automati-

cally.

4. Click OK when done.

English

Mac 10.5.8

A. Disable the proxy server, if enabled.

1. From the menu bar, click Safari >

Preferences... > Advanced tab.

2. Click Change Settings... in the

Proxies eld.

3. From the list of protocols, deselect FTP

Proxy and Web Proxy (HTTP).

4. Click OK when done.

B. Set the TCP/IP settings to

automatically obtain an IP address.

1. Click the Apple icon > System

Preferences > Network.

2. Select Ethernet and select Using

DHCP in the Congure eld.

3. Click Apply when done.

Other manuals for EA-N66

Table of contents

Languages:

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide