Asus ESC4000 G2 GPU User manual
15060-09V10000
Cache Vault Accessory Kit
Quick Start Guide
First Edition (V1) T7843
November 2012
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Contents
Package contents.................................................................................. 2
Installing the Cache Vault Kit on the holder and the PIKE card ....... 3
Installing the Cache Vault Power Module on the steel clip and holder.....3
Standard installation of Cache Vault power module.................................3
Installing the Cache Vault Flash Module on the PIKE 2208 card.............4
Installing the Cache Vault Kit on specic ASUS server systems..... 5
Installing the kit on RS720-X7/RS8, RS720-E7/RS12, RS720-E7/RS12-E
server systems .........................................................................................5
Installing the kit on TS700-X7/PS4, TS700-E7/RS8 server systems .......5
Installing the kit on RS920-E7/RS8, RS926-E7/RS8 server systems......6
Installing the kit on ESC4000 G2 GPU server system.............................7
Cache Vault Accessory Kit
Package contents
If any of the above items is damaged or missing, contact your retailer.
LSI®MegaRAID®Cache Vault Accessory Kit
Cache Vault Flash Module
(CVFM02)
Screws (1): 3 screws for
Cache Vault Flash Module
Cache Vault Power Module
(CVPM02)
24” cable extender LSI®steel CVPM clip
Screws (2): For LSI®steel
CVPM clip (3 screws, 3 screw
caps*)
ASUS Accessory Kit
Steel bracket (1 x Full-
height, 1 x Half-height)
Screws (3): 2 screws for the
steel bracket
Screws (4): 3 screws** for ASUS
steel CVPM clip holder
* Use these screws (2) and screw
caps when installing LSI®steel
CVPM clip on ASUS steel CVPM
clip holder. Use the screw caps
depending on the situation.
(Supported servers: RS720-X7/
RS8, RS720-E7/RS12, RS720-
E7/RS12-E)
** Use these screws (4) when
installing LSI®steel CVPM
clip directly on ASUS servers.
(Supported servers: RS920-E7/
RS8, RS926Q-E7/RS8)
ASUS steel CVPM clip
holder 42” cable extender
2
Cache Vault Accessory Kit
Installing the Cache Vault Kit on the holder
and the PIKE card
Install the Cache Vault Flash Module on the PIKE 2208 card, and follow the steps
below to install the Cache Vault Power Module on ASUS steel CVPM holder.
Installing the Cache Vault Power Module on the steel clip and holder
1. Locate the three screw holes on
ASUS steel CVPM clip holder.
3. Align the three screw holes on
the clip with the three screw holes
on the holder, then secure the clip
with the bundled screws (2).
4. Install the Cache Vault Power
Module to the LSI® steel
CVPM clip.
2. Find the LSI®steel CVPM clip
for securing the Cache Vault
Power Module.
Standard installation of Cache Vault power module
Some specic ASUS server systms have a specic space for installing Cache Valut Power
module, allowing you the use of all your system’s expansion slots. For generally standard
installation, please follow the steps below.
1. Install the Cache Vault Power Module on the full-height or half-height steel bracket
according to the type of expansion slots on your server system as shown below.
CVPM installed on the full-height steel
bracket, secured with the bundle screws (3).
CVPM installed on the half-height steel
bracket, secured with the bundle screws (3).
3
Cache Vault Accessory Kit
2. Locate the three screw washers on
the Cache Vault Flash Module.
3. Align the three screw
washers to the three screw
holes on the PIKE 2208
card. Drive in the bundled
screws (1) to secure the
Cache Vault Flash Module.
If the PIKE 2208 card is already installed in a server system, uninstall it from the
system, and install the Cache Vault Flash Module to the PIKE 2208 card as instructed
above. For details, refer to user manual that came with your server system.
The images shown below are for reference only.
Installed on a 2U server system. Installed on a 5U server system.
2. Install the Cache Vault Power Module on your server system.
Installing the Cache Vault Flash Module on the PIKE 2208 card
1. Place the PIKE 2208 card
on a at, stable surface.
Locate the three screw
holes on it.
4
Cache Vault Accessory Kit
Installing the Cache Vault Kit on specic
ASUS server systems
After installing the Cache Vault Falsh Module on the PIKE 2208 card, and installing
the Cache Vault Power Module on the steel CVPM clip and holder, install these two
assemblies to the specic ASUS server systems as instructed below.
Installing the kit on RS720-X7/RS8, RS720-E7/RS12, RS720-E7/
RS12-E server systems
1. Locate the two screw holes on the
right side of the server chassis.
2. Align the two screws on the side of
the steel CVPM holder installed with
the Cache Vault Power Module to
the two screw holes on the right side
of the server chassis. Secure the
holder assembly with two screws, and
connect the 42’’ cable extender to the
Cache Vault Power Module.
screw
locations
3. Connect the other end of the 42’’
cable extender to the Cache Vault
Flash Module that is installed on the
PIKE 2208 card.
4. Install the PIKE 2208 card into the
server system. Arrange the cable
extender in the direction of the arrows.
Installing the kit on TS700-X7/PS4, TS700-E7/RS8 server systems
1. Remove the chassis cover and lay
the system on its side on a at, stable
surface. Use a Phillip driver to remove
the screw on the metal slot cover and set
the screw aside. Remove the metal slot
cover.
Remove the metal slot cover close
to the bottom of the server chassis.
5
Cache Vault Accessory Kit
4. Install the PIKE 2208 card installed
with the Cache Vault Flash Module
on the system. Connect the cable
from the Cache Vault Power Module
to the Cache Vault Flash Module.
5. Secure the cable to the bottom
chassis cover using a piece of
acetate cloth tape.
Installing the kit on RS920-E7/RS8, RS926-E7/RS8 server systems
1. Take out the riser card bracket from
the system and place it on a at, stable
surface. Locate the three screws.
For more details on how to uninstall the riser card bracket, refer to the user
manual that came with your server system.
2. Align the two screws on the side
of the steel CVPM holder installed
with the Cache Vault Power Module
to the screw holes of the full-height
steel bracket. Secure the holder
assembly with the bundled screws
(3).
3. Place the holder assembly into the
system and secure it with the screw
removed earlier in step 1.
6
Cache Vault Accessory Kit
2. Align the three screw holes on the
LSI® steel CVPM clip to the three
screw holes on the bracket, and
secure the clip with the bundled
screws (4).
3. Install the Cache Vault Power
Module to the clip and connect the
42’’ cable extender to it.
4. Connect the other end of the 42’’
cable extender to the Cache Vault
Flash Module which is installed on
the PIKE 2208 card.
5. Install the PIKE 2208 card to the
expansion slot, and then install the
bracket to the system as shown.
Wrap the excessive part of the
cable and place it into the gap
beside the PIKE 2208 card.
PIKE 2208 card
For more details on how to uninstall the riser card bracket, refer to the user
manual that came with your server system.
Installing the kit on ESC4000 G2 GPU server system
1. Align the two screws on the side of
the steel CVPM holder installed with
the Cache Vault Power Module to the
screw holes of the full-height steel
bracket. Secure the holder assembly
with the bundled screws (3).
7
Cache Vault Accessory Kit
3. Put the cable through the hole on
the bracket.
4. Place the bracket into the server
system and secure it with screws.
5. Connect the cable from the Cache
Vault Power Module to the Cache
Vault Flash Module that is installed
on the PIKE 2208 card.
6. Install the PIKE 2208 card to the
riser card bracket.
7. Install the bracket to the system
according to the instructions in the
server system's user manual.
For more details on how to
uninstall the riser card bracket,
refer to the user manual that
came with your server system.
2. Take out the riser card bracket from
the right side of the server system.
Align the screw holes on the holder
assembly to the screws holes on
the bracket, then secure the holder
assembly with a screw.
For more details on how to
uninstall the riser card bracket,
refer to the user manual that
came with your server system.
8
Cache Vault Accessory Kit
快速安裝手冊
版權說明
©ASUSTeK Computer Inc. All rights reserved. 華碩電腦股份有限公司保留所有權利
本使用手冊包括但不限於其所包含的所有資訊皆受到著作權法之保護，未經華碩
電腦股份有限公司（以下簡稱「華碩」）許可，不得任意地仿製、拷貝、謄抄、轉
譯或為其他利用。
免責聲明
本使用手冊是以「現況」及「以目前明示的條件下」的狀態提供給您。在法律允
許的範圍內，華碩就本使用手冊，不提供任何明示或默示的擔保及保證，包括但不
限於商業適銷性、特定目的之適用性、未侵害任何他人權利及任何得使用本使用手
冊或無法使用本使用手冊的保證，且華碩對因使用本使用手冊而獲取的結果或透過
本使用手冊所獲得任何資訊之準確性或可靠性不提供擔保。
台端應自行承擔使用本使用手冊的所有風險。 台端明確了解並同意，華碩、華
碩之授權人及其各該主管、董事、員工、代理人或關係企業皆無須為您因本使用手
冊、或因使用本使用手冊、或因不可歸責於華碩的原因而無法使用本使用手冊或其
任何部分而可能產生的衍生、附隨、直接、間接、特別、懲罰或任何其他損失（包
括但不限於利益損失、業務中斷、資料遺失或其他金錢損失）負責，不論華碩是否
被告知發生上開損失之可能性。
由於部分國家或地區可能不允許責任的全部免除或對前述損失的責任限制，所以
前述限制或排除條款可能對您不適用。
台端知悉華碩有權隨時修改本使用手冊。本產品規格或驅動程式一經改變，本使
用手冊將會隨之更新。本使用手冊更新的詳細說明請您造訪華碩的客戶服務網 http://
support.asus.com，或是直接與華碩資訊產品技術支援專線 0800-093-456 聯絡。
於本使用手冊中提及之第三人產品名稱或內容，其所有權及智慧財產權皆為各別
產品或內容所有人所有且受現行智慧財產權相關法令及國際條約之保護。
當下列兩種情況發生時，本產品將不再受到華碩之保固及服務：
（1） 本產品曾經過非華碩授權之維修、規格更改、零件替換或其他未經過華碩
授權的行為。
（2）本產品序號模糊不清或喪失。
目錄
包裝盒內容物 .......................................................................................... 2
安裝 Cache Vault 套件至支架與 PIKE 控制卡 ........................................... 3
安裝 Cache Vault 電源模組至 CVPM 鐵件夾與支架 ..............................3
Cache Vault 電源模組一般標準安裝 .....................................................3
安裝 Cache Vault 快閃記憶體模組至 PIKE 2208 控制卡 ......................4
Cache Vault 電源模組安裝至特定華碩伺服器 ........................................... 5
安裝至 RS720-X7/RS8、RS720-E7/RS12、RS720-E7/RS12-E 伺服器 ..5
安裝至 TS700-X7/PS4、TS700-E7/RS8 伺服器 ...................................5
安裝至 RS920-E7/RS8、RS926-E7/RS8 伺服器 ...................................6
安裝至 ESC4000 G2 GPU 伺服器 .........................................................7
Cache Vault Accessory Kit 快速安裝手冊
10
包裝盒內容物
若以上列出的任何一項配件有損壞或是短缺的情形，請儘速與您的經銷
商連絡。
LSI® MegaRAID® Cache Vault Accessory Kit 組件
Cache Vault 快閃記憶體模組
（Cache Vault Flash Module）
（CVFM02）
螺絲(1)：Cache Vault 快閃記
憶體模組專用螺絲（3 顆）
Cache Vault 電源模組
（Cache Vault Power Module）
（CVPM02）
24 吋纜線延長線
（24”Cable extender）
LSI® CVPM 鐵件夾
（Steel CVPM clip/holder）
螺絲(2)：LSI® CVPM 鐵件夾
專用螺絲與螺帽 *（含 3 顆螺
絲、3 個螺帽）
華碩專用組件
鐵件擋板（半高與全高各一
個）
螺絲(3)：鐵件擋板螺絲 2 顆 螺絲(4)：華碩 CVPM 鐵件夾
專用支架組裝用螺絲 3 顆 **
* 螺絲(2)（含螺帽）為提供
安裝於華碩 CVPM 鐵件夾
專用支架時使用（螺帽為
視現況需求安裝）（支援
RS720-X7/RS8、RS720-E7/
RS12、RS720-E7/RS12-E
伺服器使用）。
** 螺絲(4) 為提供 LSI® CVPM
鐵件夾直接安裝於華碩伺服
器時使用（支援 RS920-E7/
RS8、RS926Q-E7/RS8 伺服
器使用）。
華碩 CVPM 鐵件夾專用支架 42 吋纜線延長線
（42”Cable extender）
Other manuals for ESC4000 G2 GPU
2
This manual suits for next models
9
Table of contents
Other Asus Accessories manuals
Asus
Asus ABTU001 User manual
Asus
Asus Pen 2.0 User manual
Asus
Asus Xtion User manual
Asus
Asus WS101 User manual
Asus
Asus Xtion User manual
Asus
Asus ZenPower Slim User manual
Asus
Asus Xtion 2 User manual
Asus
Asus ABTU012 User manual
Asus
Asus ROG RYUO III ARGB Series User manual
Asus
Asus Active Stylus SA200H User manual
