AssureTec Technologies ID-100 User manual
ID-100 AND ID-150 DESKTOP DOCUMENT SCANNER USER’S GUIDE
Revision
11
Release Date
April 13, 2011
AssureTec Technologies, Inc.
200 Perimeter Road, Manchester, NH 03103-3326 USA · (603) 641-8443
Copyright © 2009-2011 AssureTec Technologies, Inc. All Rights Reserved.
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 2 of 15
Table of Contents
1. Legal ........................................................................................................................3
2. Features ...................................................................................................................4
3. Specifications ...........................................................................................................5
4. Getting Started.......................................................................................................6
4.1. Equipment Checklist ......................................................................................................... 6
4.2. System Requirements ....................................................................................................... 6
4.3. Installation ........................................................................................................................ 6
5. Rear Panel................................................................................................................9
6. Status Indicators.....................................................................................................10
7. Cleaning................................................................................................................11
7.1. Cleaning the Feed Rollers ............................................................................................... 11
7.2. Cleaning the CIS .............................................................................................................. 12
7.3. Cleaning the Magnetic Stripe Reader (ID-150 only) ....................................................... 13
7.4. Cleaning the Document Sensors..................................................................................... 13
8. Removing a Jammed or Stuck Card..........................................................................14
9. Customer Support ..................................................................................................15
9.1. Contact Information........................................................................................................ 15
9.2. Warranty Service............................................................................................................. 15
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 3 of 15
1. Legal
AssureTec Technologies, Inc.'s ("ATS") address is:
AssureTec Technologies, Inc.
200 Perimeter Road
Manchester, NH 03103-3326
Copyright © 2009-2011 AssureTec Technologies, Inc. All rights reserved.
This document contains proprietary and confidential technology, information, and creative
works owned by ATS and its respective licensors, if any. Any use, copying, publication,
distribution, display, modification, or transmission of such technology in whole or in part in any
form or by any means without the prior express written permission of ATS is strictly prohibited.
Except where expressly provided by ATS in writing, possession of this technology or information
shall not be construed to confer any license or rights under any ATS intellectual property rights,
whether by estoppel, implication, or otherwise.
All copies of the technology and related information, if allowed by ATS, must display this notice
of copyright and ownership in full.
AssureID™, Reveal-ID™ and i-Dentify™ are trademarks of AssureTec Technologies, Inc.
Certain product, service, or company designations for companies other than ATS may be
mentioned in this document for identification purposes only. Such designations are often
claimed as trademarks or service marks. In all instances where ATS is aware of a claim, the
designation appears in initial capital or all capital letters. However, you should contact the
appropriate companies for more complete information regarding such designations and their
registration status.
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 4 of 15
2. Features
The ID-100 and ID-150 Desktop Document Scanners have the following features:
High resolution (600 dpi) double-sided color card scanner
High-speed scan and transfer of images within 5 seconds
Plug-and-play connectivity with high-speed USB 2.0 interface
Patented card transport mechanism for jitter-free image and reliable scanning
Compact and user-friendly design
Clamshell type cover mechanism for easy maintenance
870 nm IR image for front side of ID card authentication (ID-150 only)
Scanning modes:
o24-bit color, black and white, and grayscale for visible images
oblack and white, and grayscale for 870nm near-infrared image (ID-150 only)
One-pass magnetic stripe reader for ISO 7811 and AAMVA specification (ID-150 only)
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 5 of 15
3. Specifications
The hardware specifications for the ID-100 and ID-150 Document Scanners are listed below:
Specification
ID-100
ID-150
ID Card Size
Width
53.5 - 54.9mm (ISO specification 53.92 - 54.18)
Length
85 - 86mm (ISO specification 85.47 - 85.90)
Thickness
0.4 - 1.0mm (ISO specification 0.68 - 0.84)
Scanner
Scanning Side
Duplex
Illumination
Front: RGB (470/530/620nm)
Rear: RGB (465/520/630nm)
Front: RGB (470/530/620nm)
Rear: RGB (465/520/630nm)
Near-Infrared (870nm)
Sensor
Front: Color CIS
Rear: Color CIS
Scan Width
54mm
Resolution
300/600 dots per inch (DPI)
Color
8-bit grayscale; 1 bit B/W; 24-bit RGB color
Scan Speed
42mm/sec @ 600dpi; 84mm/sec @ 300dpi
Magnetic Stripe Reader
Tracks
N/A
ISO7811 3 Track, US/Canada
Driver License format
(AAMVA)
Interface
Type
USB 2.0 High Speed (480Mbps)
Physical Dimensions
Size
118W x 150D x 71H (mm)
118W x 169D x 71H (mm)
Weight
700g
750g
Power
Input
DC12V, 1.0A
Active Current
900mA
Idle Current
300mA
Environment
Operating
0 - 50 °C; 10 - 90% RH, non-condensing
Storage
-20 - 70 °C; 5 - 95% RH, non-condensing
Reliability
MCBF
(Mean Cycles Between
Failure)
1,000,000 cycles (scans)
Compliance
Radio Frequency
Interference
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Certifications
CUL , CE, C-Tick
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 6 of 15
4. Getting Started
4.1. Equipment Checklist
The ID-150 and ID-110 document scanner package includes the following pieces:
ID-100 or ID-150 document scanner unit (ID-150 is shown below)
USB cable with ferrite core
External power supply
4.2. System Requirements
The system requirements for the ID-100 and ID-150 document scanners are listed below:
Microsoft Windows XP (SP2 or greater), Windows Vista, or Windows 7 operating
systems (32- or 64-bit)
One USB 2.0 port
4.3. Installation
To install an ID-100 or ID-150 document scanner, please follow the procedure below.
Do NOT connect the scanner to the computer until instructed.
1. Install the i-Dentify™ Device Drivers installation package on the computer. This
installation is available by selecting Install Drivers from the AssureID™installation
launcher or by launching the installation manually, using one of the following
installation packages:
i-Dentify_Drivers_x86.exe –32-bit (x86) self-extracting executable
i-Dentify_Drivers_x86.msi –32-bit (x86) Windows Installer MSI install package
i-Dentify_Drivers_x64.exe –64-bit (x64) self-extracting executable
i-Dentify_Drivers_x64.msi –64-bit (x64) Windows Installer MSI install package
Follow the directions in the AssureID User’s Guide for specific instructions on installing
the drivers and the AssureID software.
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 7 of 15
2. When installing on 32-bit (x86) operating systems, a dialog will appear multiple times
asking whether to continue the installation. Click Continue Anyway (Windows XP) or
Install this driver software anyway (Windows Vista) every time this window appears.
Clicking STOP Installation or Don’t install this driver software will result in an incomplete
installation. No dialogs will appear when installing on a 64-bit (x64) operating system.
Windows XP Driver Install Warning
Windows Vista Driver Install Warning
3. Once the installation has completed, connect the ID-100 or ID-150 to the computer’s
USB port, plug the scanner in, and then power it on. The driver will automatically be
installed and configured, and a message similar to the one below (in Windows Vista) will
be displayed:
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 8 of 15
4. When the hardware installation has completed, a message will be displayed indicating
that the device is ready for use.
5. The ID-100 or ID-150 document scanner is now ready for use. To confirm that the
device drivers are properly installed, verify that the device is present in Device Manager
(accessible from the Control Panel), as shown below:
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 9 of 15
5. Rear Panel
The rear panel of the document scanner is shown below (ID-100 is shown):
Power 12VDC USB DIP
Switches
The table below describes the purposes of the DIP switches. DIP switches should not be
changed from the default position except for cleaning (#3) or if instructed by AssureTec Support
personnel.
DIP Switch #
Default
Purpose
1
Off (Up)
Reserved
2
Off (Up)
Reserved
3
Off (Up)
Enable feed roller spin motion for cleaning when On (Down)
4
Off (Up)
Upgrade firmware when On (Down)
ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc. Page 10 of 15
6. Status Indicators
The ID-100 and ID-150 document scanners have two LED status indicators on the front left
surface.
Name
Purpose
LED1
USB status / scan ready
LED2
Power status
The state of these LEDs will indicate the current status and assist in troubleshooting problems.
See the table below for interpreting the state of the indicators:
LED1
LED2
Meaning
Off
Off
Power is off. Check the power cable and switch.
Blinking Red
Green
USB is not connected. Check the USB cable and connectivity.
Red
Green
Device is in an error state. Restart device or reinstall drivers.
Blinking Yellow
Green
Scanning a card.
Stable Yellow
Green
Ready to scan.
LED1
LED2
This manual suits for next models
1
Table of contents
