Assa Abloy Sargent 52-4424 Guide

This manual suits for next models

2

Table of contents

Other Assa Abloy Door Lock manuals

Assa Abloy

Assa Abloy Sargent 11 Line User manual

Assa Abloy

Assa Abloy Yale YDD724A User manual

Assa Abloy

Assa Abloy eCLIQ User manual

Assa Abloy

Assa Abloy h.e.s. 9200 Series Manual

Assa Abloy

Assa Abloy KESO KEK i-handle S Operator's manual

Assa Abloy

Assa Abloy Yale YDLL/BLK Troubleshooting guide

Assa Abloy

Assa Abloy GARDESA User manual

Assa Abloy

Assa Abloy VERSO CLIQ V532 User manual

Assa Abloy

Assa Abloy Yale Assure Lock YRC226 Technical specifications

Assa Abloy

Assa Abloy 179A S4 User guide

Assa Abloy

Assa Abloy ABLOY EL654 User manual

Assa Abloy

Assa Abloy UNILOCK LOXURY IX User manual

Assa Abloy

Assa Abloy Arrow Revolution U4A-YRHCPZW0 Technical specifications

Assa Abloy

Assa Abloy Yale Luna Pro User manual

Assa Abloy

Assa Abloy SARGENT BL7300 Series User manual

Assa Abloy

Assa Abloy ABLOY EL587 User manual

Assa Abloy

Assa Abloy effef 118 User manual

Assa Abloy

Assa Abloy AUE100 Aperio User manual

Assa Abloy

Assa Abloy SECURITRON DPA-12 User manual

Assa Abloy

Assa Abloy Sargent KP Series Installation manual

Assa Abloy

Assa Abloy Sargent PE8900 Series User manual

Assa Abloy

Assa Abloy HES 8000 Series User manual

Assa Abloy

Assa Abloy PEMKO 3495 User manual

Assa Abloy

Assa Abloy Yale YD-01-CON-NOMOD-PB User manual

Popular Door Lock manuals by other brands

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions

Saflok

Saflok Quantum ädesē RFID installation instructions

Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

12/14/10

1 A8094A

S1/S2 Replacement Controller Instructions

52-4424, 52-4425, 52-4426

FOR INSTALLATION ASSISTANCE CONTACT SARGENT • 1-800-810-WIRE (9473) • www.sargentlock.com

Through-bolt Screws

1. On the inside of the door, remove the battery cover’s security screw.

2. Lift and remove the battery cover.

5. Disconnect gray ribbon cables, green grounding wire,

motor harness, DPS harness, and hard-wired harness/PoE

(if present). Remove inside assembly from the door.

6. Remove the four (4) Philips screws holding the original

controller in place. Remove controller.

This controller has been conﬁgured as a generic replacement.

The serial number MUST be changed before it can be used!

(For serial conﬁguration see Step #12.)

Security Screw

3. Remove inside lever (if present).

4. Remove through-bolt screws on top and bottom of

escutcheon.

7. Seat the controller into inside escutcheon. Attach with

the four (4) original Philips screws.

A8094A 2

12/14/10 Copyright © 2009 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

FOR INSTALLATION ASSISTANCE CONTACT SARGENT • 1-800-810-WIRE (9473) • www.sargentlock.com

S1/S2 Replacement Controller Instructions

52-4424, 52-4425, 52-4426

8. Reconnect the keypad harness, ground wire, DPS

harness, motor harness, and hard-wired/PoE harness

(if present).

9. Mount the inside escutcheon back on the door using the

two through-bolt screws. Reattach lever (if applicable).

10. Install batteries and battery keeper (if applicable).

11. Using Lock Conﬁguration Tool (LCT), connect to the

new controller.

12. From the main drop down, select “Conﬁgure Serial

Number”.

13. Select “Conﬁgure Serial Number in LCT” and click Go.

14. Select the correct reader/human interface.

15. Select the correct lock body.

16. Click Apply Serial Number (S/N).

17. Conﬁgure lock as usual.

Note: The serial number should match the serial

number on the previous controller which can either

be found on the controller or through the connected

EAC system.

18. Replace battery cover and install security screw.