Asoni CAM412 User manual

Pan-Tilt Network Camera

CAM412 / CAM412W

User’s Manual

Version: 3.1

Date: 5/22/2008

Content

1. Preface .................................................................................................................................2

2. Product Specifications...........................................................................................................2

3. Product Installation ...............................................................................................................4

A. Hardware Installation.........................................................................................................4

B. Monitor Setting..................................................................................................................6

C. IPAssignment ...................................................................................................................7

D. Install ActiveX Control .......................................................................................................9

4. Live Video...........................................................................................................................11

5. Configuration ......................................................................................................................14

A. System............................................................................................................................14

B. A/V Setting......................................................................................................................20

C. Network...........................................................................................................................25

D. Event Handling................................................................................................................30

6. Network Configuration ........................................................................................................38

7. Factory Default ...................................................................................................................40

Appendix....................................................................................................................................41

1. Preface

CAM412/412W is a Pan-Tilt CCD network camera, the Pan-Tilt function can be controlled

remotely. It builds in web server. User views real-time video via IE browser.

CAM412/412W supports MPEG-4 and MJPEG video compression which provides smooth

and high quality video. The video can be stored in the SD card, and can be playback

remotely using Microsoft Media Player.

CAM412/412W is an easy-to-use network P/T camera which is designed for security

application.

2. Product Specifications

zMPEG-4 / MJPEG compression formats. Supports resolution up to Full D1

zMPEG-4 / MJPEG dual streaming.

zSelf-Contained HTTP Web Server providing Internet capability for remote access

zRemote Pan/Tilt control

zWireless network connection (CAM412W)

zSupports SD card for local recording

z2-way audio

zReal-time video recording

zRecorded files compatible with Microsoft Windows Media Player

Hardware

CPU ARM 9 ,32 bit RISC

RAM 64MB

ROM 4MB

Image Sensor 1/4” CCD

Lens 3.6mm

Video Out 1

Microphone Built-in

Audio In / Out 1 in / 1 out

Digital I/O 1 In / 1 Out

Pan Angle 2700

Tilt Angle 1200

Power Consumption LAN: DC 5V, 1.3A WLAN: DC 5V, 1.5A

Network

Ethernet 10/ 100 Base-T

Wireless (CAM412W) 802.11b/g

WEP 64 / 128 bit

Network Protocol HTTP, TCP/IP, RTP/RTSP, 3GPP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP

System

Video Resolution NTSC: 720x480, 704x480, 352x240, 176x120

PAL: 720x576, 704x576, 352x288, 176x144

VideoAdjustment Brightness, Contrast, Saturation, Hue

Image Snapshot Yes

Full Screen Monitoring Yes

Pan / Tilt Control Yes, remotely

Preset Point 9

Patrol Yes

Auto Pan Yes

Pan / Tilt Speed Control Yes

Compression Format MPEG-4, MJPEG

Dual Streaming Yes, MPEG-4 / MJPEG

Video BitrateAdjustment CBR, VBR

Motion Detection Yes, 3 different areas

Triggered Action Mail, FTP, Digital out, Save to SD card

Pre/ Post Alarm Yes, configurable

Security Password protection

Firmware Upgrade HTTP mode, can be upgraded remotely

Simultaneous Connection Up to 10

Audio Yes, 2-way

SD card management

Recording Trigger Motion detection, Digital input, IP check, Network break down (available for

Wire connection)

Video Format AVI, JPEG

Video Playback Yes

File Management Yes, can be deleted or overwrite

Web browsing requirement

OS Windows 2000, XP, 2003, Microsoft IE 6.0 or above

Hardware Suggested Intel-C 2.0G, RAM: 512MB, Graphic card: 64MB

Minimum Intel-C 1.6G, RAM: 256MB, Graphic card: 32MB

3. Product Installation

A. Hardware Installation

nNetwork Connector: The RJ-45 connector allows connect the Ethernet cable.

oPower Jack: To connect the included power adapter.

pAudio Out: The 3.5mm jack allows connect to an amplified speaker, you

can hear the voice of the remote site from the speaker.

qAudio In: The 3.5mm jack allows connect to a microphone or audio

source, the voice will be transffered to the remote site via

network.

rVideo Out: The RCA connector allows connect to the analog display to

output analog video for locally monitoring.

sDigital I/O: Digital In and Digital Out.

tAntenna Connector: Available for CAM412W. To connect the included wireless

antenna.

cAlarm Input

dGND

eAlarm Output

fGND

1. Connect the cable of Digital I/O, Video output, Audio in and Audio output if you want to

use these functionalities.

2. Connect the wireless antenna for CAM412W.

3. Connect Ethernet cable for network connection.

4. Connect power adapter to turn on the camera.

5. Set up the network configurations according to the network environment. For further

explanation, please refer to chapter 6.

6. After finish the configuration for the very first time, if you want to use wireless network,

plug out the Ethernet cable.

B. Monitor Setting

1. Right-Click on the desktop. Select [Properties]

2. Change color quality to “Highest (32bit)”.

C. IP Assignment

¾Always consult your network administrator before assigning an IP address to your

camera in order to avoid using a previously assigned IP address.

¾MAC Address: Each network camera has a unique Ethernet address (MAC address)

shown on the sticker of the camera.

¾One final note, although the IP Search is able to find and configure any network

camera on the LAN except those that are behind a router, it is a good idea to set the

host PC to the same subnet. In order to connect to the Web-based user interface of

the network camera, the host PC must be in the same subnet. For more information

about subnets, please consult your network administrator.

There are 3 kinds of IP configuration:

zFixed IP (Public IP or Virtual IP)

zDHCP (Dynamic IP)

zDial-up (PPPoE)

IP Search is a utility that provides an easier, more efficient way to configure the IP

address and network settings of the network camera. It even provides a convenient way

to set the network settings for multiple devices simultaneously. Moreover, IP Search can

save the network settings for all devices as a backup and restore them when necessary.

The software can be installed from the attached software CD.

1. Once IP Search has been successfully installed on the computer, double click the

IP Search icon on the desktop.

2. IP Search searches all the network devices which connect to the intranet and lists

on the window. Click [Search] button to search again.

3. From the list, select the device with the MAC Address that corresponds to the

device that is to be configured.

4. Click one of the network devices, the network configuration of this device will show

on the bottom.

5. After filling in the IPAddress, Subnet Mask, Gateway and the others, click [Set]

button to complete the configuration settings and save into the remote device.

6. You can assign a name to identify the camera. Type the name in “Device Name”

field, click [Save] and then click [Search] button, the name will be displayed in the

list.

7. Wait for 1 minute to let camera update the settings, and then click [Search] button

again to re-search the network devices. Click the network device listed on the

window and click [Open Web] button. It will open an IE browser and connect to this

device directly.

D. Install ActiveX Control

For the first time to view the camera video via IE, it will ask you to install the ActiveX

component.

If the installation failed, please check the security setting for the IE browser.

1. In IE, click on [Tools] Æ[Internet Options…]

2. Click on [Security] Tab Æ[Custom Level…]

3. In Security Settings, under [Download unsigned ActiveX controls], select “Enable”

or “Prompt”.

4. In Security Settings, under [Initialize and script ActiveX controls not marked as safe],

select “Enable” or “Prompt”.

5. When pop-up window with warning message, click [Yes] to save the settings.

1 2

Other manuals for CAM412

This manual suits for next models

Table of contents

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications