Asante IntraStack 6014DSB Manual



IntraStack 6014DSB —

READ ME FIRST P/N 06-00374-00 Rev. B

IntraStack

™

6014DSB

READ ME FIRST

Thank you for purchasing the IntraStack 6014DSB Ethernet switch.

This document contains important information regarding the IntraStack 6014DSB and its

User’s Manual. Please review both sides of the document before proceeding with the instal-

lation.

Attention Macintosh Users!

Auto-Negotiation and Full Duplex Operation

The IntraStack 6014DSB is shipped with Nway™ auto-negotiation enabled on all

ports.

The Nway auto-negotiation sequence attempts to negotiate a network connection at

the fastest possible speed,including Full Duplex operation. Full Duplex operation is

indicated by the FDP LED on the IntraStack 6014DSB’s front panel or through the

Port Conﬁguration menu (accessible via the HTTP server [aWeb browser] or the

Console/Telnet screens).

Network Cards That Do Not Support Full Duplex Operation

If you are currently using a network interface card that does not support Full Duplex

drivers,you need to conﬁgure the port to half duplex operation (see chapter 5 of the

IntraStack 6014DSB’s User’s Manual for instructions).

If you are currently using anAsantéFAST 10/100 PCI card,install the 2.4 full duplex

driver included in this package.

Identifying Duplex Operation Errors

Symptoms of a duplex operation mismatch are:

❏High numbers of collisions

❏Very slow transfer times



IntraStack 6014DSB —

READ ME FIRST P/N 06-00374-00 Rev. B

User’s Manual Erratum

The following are some additions and/or corrections to information contained in the

IntraStack 6014DSB User’s Manual.

Forwarding Database Age-Out Timer

The Forwarding DatabaseAge-OutTimer’s default setting is

300 seconds

Default Spanning Tree Parameters

The IntraStack 6014DSB is shipped with the following default SpanningTree parameters:

❏

HelloTime — 2 seconds

❏

MaxAge — 20 seconds

❏

Forward Delay — 15 seconds

Console Default Time-Out

The Console Interface’s default time-out setting is

5 minutes

This parameter can be changed while connected to the Local Management Interface via the

Console port (open the

Conﬁguration

menu and type

“set idle time-out”);however,the

setting is

not

retained after a system reset.

Telnet Default Time-Out

The defaultTelnet IdleTime-Out setting is

20 minutes

. This setting

cannot

be changed.

Installing MII Expansion Modules

After installing an MII expansion module(s),power cycle the IntraStack 6014DSB (turn the

IntraStack off and then on).

The power must be cycled in order for the IntraStack 6014DSB to recognize the installed MII

expansion modules.

Other manuals for IntraStack 6014DSB

Table of contents

Other Asante Network Router manuals

Asante

Asante FriendlyNET FR1104-G User manual

Asante

Asante FriendlyNET VR2004 Series User manual

Asante

Asante FriendlyNET FS4124R User manual

Asante

Asante IntraCore 8000 User manual

Asante

Asante FriendlyNET FR1000 User manual

Asante

Asante 6000 Series User manual

Asante

Asante IntraSwitch 5308FL User manual

Asante

Asante Asante FriendlyNET FS4116R User manual

Asante

Asante IntraCore 35516 Series User manual

Asante

Asante IntraCore IC3624PWR User manual

Asante

Asante FriendlyNET GX5-424W User manual

Asante

Asante FriendlyNET FS4116R User manual

Asante

Asante IntraCore 36480 User manual

Asante

Asante IntraCore 40240 User manual

Asante

Asante Asante FriendlyNET FS4124R User manual

Asante

Asante FriendlyNET GX5-424W User manual

Asante

Asante FriendlyNet FS3208 User manual

Asante

Asante ReadySwitch 5104 Manual

Asante

Asante FriendlyNET FS4005P User manual

Asante

Asante IntraStack 6014DSB User manual

Asante

Asante FriendlyNet FS4004DS User manual

Asante

Asante IntraSwitch 5324MT User manual

Asante

Asante FriendlyNET FS4016P User manual

Asante

Asante FriendlyNET GX5-424W User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview