1-6 ARISTOMAT SL Series
Safety Instructions
2. Safety Instructions
In accordance with observed current safety guidelines the ARISTOMAT
is classified as a production machine for the use in an industrial environ-
ment.
Nevertheless dangers can proceed from these machines, if the following
safety regulations are not considered or a not directed use takes place.
In order to avoid injuries to personnel or damages to the plotter read and
observe the safety regulations absolutely. The following safety regulations
are completed by special safety and danger notes in the individual hand-
books of the tool heads.
•The ARISTOMAT, tool heads and accessories shall only be put in
operation, when in faultless condition and shall only be used as they
have been delivered from the factory.
•The ARISTOMAT shall only be used or operated by trained personnel
•Trainees shall operate the machine under supervision of experienced
personnel only.
•The faultless function of the safety devices must be checked before
each operation. With malfunctions the plotter shall not be taken in
operation.
•Covers are part of safety. Do not remove any covers from the ARISTO-
MAT, tool heads and accessories.
•Unauthorized modification which might impair the safety of the
machine are not permitted.
•Safety Devices (Light barriers, Collision Shut-off, EMERGENCY OFF
buttons in the plotter system) may not be bridged or put out of
operation under any circumstances.
•Do not turn the control panel to the movement area of the tools. Do not
overstrain the bumper.
•Assembly, start-up, maintenance and repair of the machine should
be carried out by service personnel only, which is authorized of manu-
facturer.
•Use a maximum air pressure up to 6 bar and only oil-free and pulse-free
compressed air.
•Do not wear loose clothing, hanging ties, jewellery, or the like; tie back
long hair.
- apparel accessories or other parts hanging from the body can get
caught in the moving parts of the machine and cause severe injuries.
