Argox iX4 Series User manual
i
iX4 Series Printer
User Manual
http://www.argox.com
i
Liability Disclaimer
Argox Corporation takes steps to assure that the company’s published
engineering specifications and manuals are correct; however, errors do
occur. Argox reserves the right to correct any such errors and disclaims any
resulting liability. In no event shall Argox or anyone else involved in the
creation, production, or delivery of the accompanying product (including
hardware and software) be liable for any damages whatsoever (including,
without limitation, damages for loss of business profits, business
interruption, loss of business information, or other pecuniary loss) arising
out of the use of or the results of use of or inability to use such product,
even if Argox has been advised of the possibility of such damages.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into a different outlet on a different circuit.
Consult the dealer or an experience Radio/TV technician for help.
This unit was tested with shielded cables on the peripheral devices. Shielded
cables must be used with the unit to insure compliance. The user is
cautioned that any changes or modifications not expressly approved by
Argox Information Co., Ltd. could void the user’s authority to operate the
equipment.
ii
This is a Grade A product. In living environment, the product may cause interference
to radio communications. In this case, the user is encouraged to try to correct the
interference by effective measures.
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
All rights reserved. Copyright © 2017 Argox Information Co., Ltd
iii
Contents
1 Introduction ...........................................................................................................1
1.1 Features.......................................................................................................1
1.2 Unpacking....................................................................................................2
1.3 Understand your printer .............................................................................3
1.3.1 Perspective view ............................................................................3
1.3.2 Back view .......................................................................................4
1.3.3 Interior view...................................................................................5
1.4 Printer control panel ...................................................................................6
1.4.1 Status lights....................................................................................6
1.4.2 Buttons...........................................................................................8
2 Get started .............................................................................................................9
2.1 Attach the power cord ................................................................................9
2.2 Turn on/off your printer............................................................................10
2.2.1 Turn on your printer.....................................................................10
2.2.2 Turn off your printer ....................................................................11
2.3 Load media................................................................................................12
2.3.1 Prepare media..............................................................................13
2.3.2 Placing media roll.........................................................................14
2.3.3 Media types .................................................................................25
2.1 Load Ribbon ..............................................................................................27
2.1.1 Placing Ribbon Roll.......................................................................28
3 Printer operation..................................................................................................31
3.1 Front Panel ................................................................................................31
3.1.1 LCD Function Setting Procedure ..................................................32
3.2 Printing Media Calibration & Configuration .............................................39
3.3 Printing a Configuration Report ................................................................40
3.4 Resetting to Factory Default Settings........................................................50
3.5 Media sensing ...........................................................................................51
3.5.1 Transmissive sensor .....................................................................51
3.5.2 Reflective sensor..........................................................................52
3.5.3 Adjust Position of Label Sensor....................................................53
3.6 Communications .......................................................................................54
3.6.1 Interfaces and Requirements.......................................................54
3.7 Driver installation......................................................................................56
3.7.1 Installing a Plug and Play printer driver (for USB only)................57
3.7.2 Installing a Printer Driver (for other interfaces except USB)........63
iv
4 Maintenance ........................................................................................................69
4.1 Cleaning.....................................................................................................70
4.1.1 Printhead......................................................................................70
4.1.2 Platen Roller.................................................................................71
4.2 RTC Battery Replacement..........................................................................72
5 Troubleshooting ...................................................................................................73
5.1 Printer issues.............................................................................................73
5.2 Media issues..............................................................................................74
5.3 Ribbon issues.............................................................................................75
5.4 Other issues...............................................................................................76
6 Specifications .......................................................................................................77
6.1 Printer........................................................................................................77
6.2 Media & Ribbon ........................................................................................79
6.3 Electrical and operating environment.......................................................80
6.4 Physical dimension....................................................................................80
6.5 Fonts, Barcodes, and Graphics Specification ............................................81
6.6 Interfaces...................................................................................................84
6.6.1 USB...............................................................................................84
6.6.2 RS-232C ........................................................................................85
6.6.3 Centronics ....................................................................................86
6.6.4 Ethernet .......................................................................................87
1 Introduction Features
1
1Introduction
Thank you for purchasing an Argox iX4 Series industrial barcode printer. This
manual provides information about how to set up and operate your printer,
load media, ribbon and solve common problems. Illustrations are provided
to help you quickly become familiar with the printer.
1.1 Features
￭Fast Print Speed
Max. 8 IPS, fastest print speed in its class.
￭Communication
Standard: Ethernet, dual USB hosts, USB device, and RS-232.
Option: Wi-Fi, GPIO, Parallel, and Buzzer
￭Online management
Web management and SNMP v2 support
￭Duel USB host function
Stand-alone mode of scanner/ keyboard multiple data entry devices
￭New media calibration
Intelli mode & Auto-feed mode & Smart mode
1 Introduction Unpacking
2
1.2 Unpacking
Make sure all of the following items are included in your package.
Printer
Quick Installation
Guide
1”ID Core for Ribbon
USB Cable
AC Power Cord
When you receive the printer, open the package immediately and inspect for
shipping damage. If you discover any damage, contact the shipping company
and file a claim. Argox is not responsible for any damage incurred during
shipping. Save all package materials for the shipping company to inspect.
Note If any item is missing, please contact your local dealer.
1 Introduction Understand your printer
3
1.3 Understand your printer
1.3.1 Perspective view
Control
panel
Top Access Door
1 Introduction Understand your printer
4
1.3.2 Back view
WIFI
Optional
Standard
USB Type A
Ethernet
USB Type B
RS232 Serial
Power switch
AC power connector
Parallel port
GPIO
1 Introduction Understand your printer
5
1.3.3 Interior view
Internal Parts and Features
Rotate Head Latch
Head Latch
Paper Sensor
Guide
Paper Roller
Thermal Print Head
Ribbon Pick-up Spindle
Ribbon Supply Spindle
Media Supply Spindle
Feed Slot
Outside Media Guide
Other manuals for iX4 Series
4
Table of contents
Other Argox Printer manuals
Argox
Argox PI-10X0 Owner's manual
Argox
Argox A-2240 User manual
Argox
Argox AME-3230 User manual
Argox
Argox R-400plus User manual
Argox
Argox P4 Series User manual
Argox
Argox Xellent X-1000VL User manual
Argox
Argox D4 250 User manual
Argox
Argox O4 Series User manual
Argox
Argox AME-3230 User manual
Argox
Argox X2000 User manual
Argox
Argox X-2300 User manual
Argox
Argox OS Series User manual
Argox
Argox OS Series User manual
Argox
Argox MP Series User manual
Argox
Argox Smart CP-2140 User manual
Argox
Argox O4 Series User manual
Argox
Argox OS-214ZIP User manual
Argox
Argox CP Series User manual
Argox
Argox OS-2130DE User manual
Argox
Argox CP-2140Z User manual
