Aplex AEx-815P User manual

AEx-8XXP(H)

15”, 15.6”, 19”, and 21.5” Full IP66 Stainless Steel Designed with M12 waterproof

connector of Panel PC Series.

User Manual

Release Date Revision

Jan. 2018 V1.0

Aplex Technology, Inc.

15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan

Tel: 886-2-82262881 Fax: 886-2-82262883 URL: http://www.aplextec.com/zh/home.php

AEx-8XXP(H) Series User Manual

Revision History

Reversion

Date

Description

0.1

2017/11/24

For Preliminary Release

1.0

2018/01/02

Official version

AEx-8XXP(H) Series User Manual

Warning!___________________________

This equipment generates, uses and can radiate radio frequency energy and if

not installed and used in accordance with the instructions manual, it may

cause interference to radio communications. It has been tested and found to

comply with the limits for a Class A computing device pursuant to FCC Rules,

which are designed to provide reasonable protection against such interference

when operated in a commercial environment. Operation of this equipment in

a residential area is likely to cause interference in which case the user at his

own expense will be required to take whatever measures may be required to

correct the interference.

Disclaimer

This information in this document is subject to change without notice. In no event

shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or

consequential, arising from either the use or misuse of information in this

document or in any related materials.

Electric Shock Hazard –Do not operate the machine with its back cover

removed. There are dangerous high voltages inside.

AEx-8XXP(H) Series User Manual

ATEX Instruction Guide

SAFETY INSTRUCTIONS

Read these instructions carefully, and look at the equipment to become familiar with

the device before trying to install, operate, or maintain it. The following special

messages may appear throughout this documentation or on the equipment to warn

of potential hazards or to call attention to information that clarifies or simplifies a

procedure.

PLEASE NOTE

Electrical equipment should be installed, operated, serviced, and maintained only by

qualified personnel. No responsibility is assumed by Digital Electronics Corporation

for any consequences arising out of the use of this material. A qualified person is one

who has skills and knowledge related to the construction and operation of electrical

equipment and its installation, and has received safety training to recognize and

avoid the hazards involved.

SCOPE

This present document applies when AEx-8XXP(H) Series bears marking. They

are supplied only with DC 9~36 V. This documentation has to be kept and always

refer to those instructions for installation, operation, maintenance or evolution of

your system.

Permitted zones of application

Refer to the section titled "Markings" to get information about the permitted zones

of protection and the types of protection.

•AEx-8XXP(H) Series is installed in zones 2 hazardous areas must be certified and

bear the marking.

•Ensure with the marking that the terminals are compatible with the conditions

permitted for the hazardous area at the site where it is being used.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible injury

or death.

AEx-8XXP(H) Series User Manual

Notice

1. Under certain extreme circumstances, the label may generate an

ignition-capable level of electrostatic charge. Therefore the equipment shall not

be installed in a location where the external conditions are conducive to the

build-up of electrostatic charge on the label. In addition, the label shall only be

cleaned with a damp cloth.

2. Warning –in locations where high external humidity and internal temperature

variations (e.g. frequent on-off cycles) may cause condensation inside the

equipment, the interior should be periodically inspected.

3. When the device is mounted in a hazardous area, connection and

disconnection of external connectors while live is only permitted if the potentially

explosive atmosphere is shown to be absent.

4. The “9-36” Vdc rated supply shall be protected such that transients are limited

to a maximum of 119 V; no such protection is required for the signal lines.

5. Equipotential bonding facilities on the outside of enclosure are assessed as

providing effective connection of a conductor with a cross-sectional area of at least

4 mm2, 10AWG, 600V wire

6. The equipment is suitable for use in class I, division 2, groups A, B, C, D OR

non-hazardous locations only.

7. Warning- Do not use USB while the circuit is live unless the area is known to

be non-hazardous.

Markings

ATEX and markings, applied to the AEx-8XXP(H) Series Graphic Operator Interface,

are as follows:

AEx-8XXP(H) Series

WARNING: Do not disconnect while circuit is live. Potential

electrostatic charges. Wipe the front panel of the terminal with a

damp cloth before turning on.

II 3G Ex nA ic IIC T4 Gc and CID2 IP66

Temperature < 135°C

Power Input Voltage: DC 9~36V

TUV 15 ATEX 7701 X

IECEx TUR 16.0008X

AEx-8XXP(H) Series User Manual

Table of Contents

Revision History…………………………………………………………………………………………………….1

Warning!/Caution………………..……………...................................…………………………….…2

Packing List…………………………………….……………………………………………………………………..3

Safety Precautions…………………………………………………………………….…..……………………..4

Chapter 1 Getting Started

1.1 Features………………………..………………………...…………………………..7

1.2 Specifications…………………...………………………………………………….7

1.3 Dimensions………………………....…………………………………………..….9

1.4 Brief Description of AEx-8XXP(H)………………………….……….……11

1.5 VESA Mounting…………………………………………………………………12

1.6 Panel Mounting…………………………………………………………………12

Chapter 2 Hardware

2.1 Motherboard Introduction……………………...……………..………....13

2.2 Specifications…………………………..…………………………………………13

2.3 Jumpers and Connectors Location……………………………………...17

2.4 Jumpers Setting and Connectors…………………………………..……18

Chapter 3 BIOS Setup

3.1 Operations after POST Screen…...…….……...…………………………32

3.2 BIOS Setup Utility……………………………………………………………….32

3.3 Main Settings……………………………………..………………………………33

3.4 Advanced Settings……………………………………………………………...34

3.5 Chipset Settings……………………………………….………………………...42

3.6 Security Settings…………………………………………….…………………..44

3.7 Boot Settings…..………………………………………….……………………..45

3.8 Save & Exit Settings……………………………………..…………………....46

Chapter 4 Installation of Drivers

4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………49

4.2 Intel (R) VGA Chipset……………………………………………….……......52

4.3 Realtek ALC662 HD Audio Driver Installation…….……..………...56

4.4 Com Driver……………………………………………………..…………………58

4.5 Intel_TXE(Win) Driver……….……………………………………………….60

AEx-8XXP(H) Series User Manual

Chapter 5 Touch Screen Installation

5.1 Windows 8.1/10 Universal Driver Installation……..………………63

5.2 Software Function…………….…………………………………….……......67

Figures

Figure 1.1: Dimensions of AEx-815P(H)……..…………………..……………….....9

Figure 1.2: Dimensions of AEx-816P…………..…………………..……………….....9

Figure 1.3: Dimensions of AEx-819P(H)……..…………………..………………....10

Figure 1.4: Dimensions of AEx-821P…………..…………………..………………....10

Figure 1.5: Front View of AEx-8XXP(H).…………………………………….…….….11

Figure 1.6: Rear View of AEx-8XXP(H)……..…………………………………….….11

Figure 1.7: AEx-8XXP(H) Series VESA Mounting..…………………….…….….12

Figure 1.8: AEx-8XXP(H) Series Panel Mounting…………………………….….12

Figure 2.1: Motherboard Dimensions………………………………………….…….16

Figure 2.2: Jumpers and Connectors Location-Board Top……………….….17

Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…17

AEx-8XXP(H) Series User Manual

Chapter 1 Getting Started

1.1 Features

Intel® Celeron Processor N2930

Full flat bezel and fanless design

Full IP66 grade with M12 waterproof connector

DC 9~36V wide range power input

Projective capacitive touch

316 Stainless steel design

1.2 Specifications

AEx-815P(H)

AEx-816P

AEx-819P(H)

AEx-821P

System

CPU

Onboard Intel Celeron N2930 1.83GHz Processor

Chipset

SoC

Memory

Onboard 8GB DDR3L

IO Port

USB

1 x M12 for 2 x USB2.0 with metal waterproof CAP

Serial/Parallel

1 x M12 for COM1—RS-232(RS-422/485 for option) with metal waterproof CAP

LAN

2 x M12 for LAN with metal waterproof CAP

Power

1 x M16 for DC power input with metal waterproof CAP

VGA

1 x M12 for VGA with metal waterproof CAP

Optional IO Port (Must be a replacement for standard I/O)

USB

1 x M12 for 2 x USB2.0 (Cannot support 2 x M12 for 2 x USB2.0)

1 x M12 for 1 x USB3.0

Serial/Parallel

1 x M12 for 1x RS-232 (Cannot support 2 x M12 for 2x RS-232)

Storage Space

Storage

1 x 2.5” SATA HDD or SSD space

1 x Internal SD Card slot on board

1 x mSATA slot

Display

Display type

15”color TFT LCD

15.6”color TFT LCD

19”color TFT LCD

21.5”color TFT LCD

Max. Resolution

1024 x 768

1920 x 1080

1280 x 1024

1920 x 1080

Max. Color

16.2M

16.7M

Luminance (cd/m2)

450

1000

400

350

1000

300

AEx-8XXP(H) Series User Manual

Contrast Ratio

800: 1

700: 1

1000: 1

5000: 1

Viewing Angle

160(H) / 150(V)

160(H) / 140(V)

170(H) / 160(V)

178(H) / 178(V)

Backlight Lifetime

50,000 hrs

Power

Power Input

DC 9~36V

Power Consumption

MAX: 22.2W

MAX: 24.7W

MAX: 33.3W

MAX: 38.8W

Mechanical

Construction

316 Stainless Steel Chassis

Mounting

VESA Mount 100 x100 (default)

Panel Mount (option)

Dimension (mm)

399 x 324 x 70mm

440 x 290 x 75mm

470 x 388.6 x 75mm

571 x 362 x 75.1mm

Net Weight (Kg)

9.4

10.1

13.3

Environmental

Operating

temperature

-20~60°C

Storage temperature

-30~70°C

Altitude limit for

application

Under 2000m

Overvoltage

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

Acnodes

Acnodes PC 1150 installation guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

Advantech

Advantech TPC-30 Series user manual