Anuraco BLE-485 User manual
1
4
5
3
2
INSTALL ANURACOM UTILITY
ON WINDOWS 7 or 10 COMPUTER
anuraco.com / +1 425.890.8221
BLE-485 Bluetooth Adaptor
GETTING STARTED GUIDE
CONNECT BLE-485 ADAPTOR TO
DEVICE/SENSOR
BLE-485 Adaptor can be connected to any
RS485 device via an M12 connector (either wired, or
built into device).
5
Open your downloaded .exe file.
Install following the ulity instrucons.
Click install when prompted.
Black screen will run during
install in background.
Select your Bluetooth
4.0+ dongle device when
prompted.
Once installed you will
see the Anuraco logo
in your dock toolbar,
and as a shortcut on your
desktop.
Click Anuraco icon in your
toolbar to begin using
Anuracom Ulity.
The COM port link will
blink green unl COM
port is established (then
will become solid green).
7
Funcon
1 - 9-24 VDC
2 - RS485 D-
3 - RS485 D+
4 - No Connect
5 - Ground
Female M12 Connector
6CONNECT BLE-485 ADAPTOR
TO ANURACOM UTILITY
Need help? Call us: +1 425.890.8221
anuraco.com / support@anuraco.com
8START SERIAL APPLICATION TO
SERVICE DEVICE/SENSOR
Make sure adaptor is on and ulity is open.
Click on the adaptor (will have name
that is user changeable) to connect.
Actual BLE-485 Adaptor will signal
green when connecon established.
See the full manual for detailed
instrucons on the ulity funcons
including: naming device, changing
baud rate, baery change notes,
parity, and security lock.
Insert RS485 M12 female into device M12 male.
Screw together unl secure.
Steps to get your BLE-485 Adaptor up and running:
1. Install lithium AA Baery.
2. Turn on BLE-485 Adaptor.
3. Install Bluetooth 4.0+ dongle on computer.
4. Donwload Anuracom Ulity.
5. Install Anuracom Ulity.
6. Connect BLE-485 adaptor to Anuracom Ulity.
7. Connect BLE-485 adaptor to device/sensor.
8. Start serial applicaon (if available).
INSTALL AA BATTERY
Unscrew boom
Install AA baery in circuit board as shown.
Screw boom back on unl secure.
TURN ON BLE-485 ADAPTOR
INSTALL BLUETOOTH 4.0+ DONGLE
ON COMPUTER
Turn ON your adaptor by twisng clockwise unl ON
A blue signal light will flash (for one minute only) when first
turned on. UNIT WILL REMAIN ON unless manually turned off.
Turn OFF your adaptor (for long term storage) by twisng
counter-clockwise 1 quarter of a turn or unl ght.
Turn OFF then ON to reboot LED signal.
Need help? Call us: +1 425.890.8221
anuraco.com / support@anuraco.com
BLE-485 Bluetooth Adaptor connects your bluetooth enabled
computer or smartphone to field devices for hands free monitoring.
Included in your package:
1 AA 3.6 VDC Lithium baery
1 BLE-485 bluetooth adapter
1 USB/BLE 4.0 adapter for Windows
Access to www.anuraco.com/registraon/
to download ulity soware & full manual
BLE-485 BLUETOOTH ADAPTOR OVERVIEW
Bluetooth 4.0+ dongle
Windows 7 or 10 computer
1
2
3
4
Insert Bluetooth dongle.
Follow device install instrucons.
Locate device name (Control Panel > Devices and Printers )
and write down below. Will need for ulity install.
Bluetooth Device Name__________________________
DOWNLOAD ANURACOM UTILITY
Go to www.anuraco.com/registraon
Register your device and download soware and full manual.
3.6V
+-
Need help? Call us: +1 425.890.8221
anuraco.com / support@anuraco.com
Other manuals for BLE-485
3
Other Anuraco Adapter manuals
