Analog Devices HPUSB User manual

HPUSB, USB, and HPPCI

Emulators Users Guide

Revision 3.1, September 2009

Part Number

82-000760-01

Analog Devices, Inc.

One Technology Way

Norwood, Mass. 02062-9106 a

may not be reproduced in any form without prior, express written consent

from Analog Devices, Inc.

Printed in the USA.

Notice

Analog Devices, Inc. reserves the right to make changes to or to discon-

tinue any product or service identified in this publication without notice.

Analog Devices assumes no liability for Analog Devices applications assis-

tance, customer product design, customer software performance, or

infringement of patents or services described herein. In addition, Analog

Devices shall not be held liable for special, collateral, incidental or conse-

quential damages in connection with or arising out of the furnishing,

performance, or use of this product.

Analog Devices products are not intended for use in life-support

applications, devices, or systems. Use of an Analog Devices product in

such applications without the written consent of the appropriate Analog

Devices officer is prohibited.

Users are restricted from copying, modifying, distributing, reverse

engineering and reverse assembling or reverse compiling the Analog

Devices emulator operational software (one copy may be made for

back-up purposes only).

Limited Warranty

The USB- and PCI-based emulators hardware is warranted against defects

in materials and workmanship for a period of one year from the date of

purchase from Analog Devices or from an authorized dealer.

Trademark and Service Mark Notice

The Analog Devices logo, VisualDSP++, Blackfin, TigerSHARC,

SHARC, the CROSSCORE logo, EZ-KIT Lite, and EZ-ICE are regis-

tered trademarks are registered trademarks of Analog Devices, Inc.

All other brand and product names are trademarks or service marks of

their respective owners.

Regulatory Compliance

The USB- and PCI-based emulators are designed to be used solely in a

laboratory environment. The emulator is not intended to be used in any

end products or as a portion of an end product. The emulators may cause

interference to other electronic devices operating at close proximity. The

emulators should not be used in or near any medical equipment or RF

devices.

The USB- and PCI-based emulators have been certified to comply with

the essential requirements of the European EMC directive 89/336/EEC

(inclusive 93/68/EEC) and, therefore, carries the “CE” mark.

The USB- and PCI-based emulators have been appended to Analog

Devices Development Tools Technical Construction File referenced

“DSPTOOLS1” dated December 21, 1997 and was awarded CE Certifi-

cation by an appointed European Competent Body and is on file.

The EZ-KIT Lite evaluation system contains ESD

(electrostatic discharge) sensitive devices. Electro-

static charges readily accumulate on the human

body and equipment and can discharge without

detection. Permanent damage may occur on devices

subjected to high-energy discharges. Proper ESD

precautions are recommended to avoid performance

degradation or loss of functionality. Store unused

EZ-KIT Lite boards in the protective shipping

package.

HPUSB, USB, and HPPCI Emulators User’s Guide v

CONTENTS

PREFACE

Purpose of This Manual .................................................................. ix

Intended Audience .......................................................................... ix

Manual Contents ............................................................................ ix

Technical or Customer Support ........................................................ x

GETTING STARTED

Contents of Emulator Package ....................................................... 1-2

PC Configuration ......................................................................... 1-2

Installation Tasks .......................................................................... 1-3

Installing USB-Based Emulators .............................................. 1-3

Installing PCI-Based Emulators ............................................... 1-4

Verifying Driver Installation .................................................... 1-4

Attaching the Cable to the Emulation Target ................................. 1-6

VisualDSP++ Configurator ............................................................ 1-7

JTAG Frequency Selection ............................................................. 1-8

HPPCI JTAG I/O Voltage Detection ........................................... 1-10

HPUSB/USB Legacy Mode ................................................... 1-10

HPPCI-ICE Legacy/Auto Detection Mode ............................. 1-12

CONTENTS

vi HPUSB, USB, and HPPCI Emulators User’s Guide

Legacy Mode (Factory Default Setting) .................................. 1-13

Auto Detection Mode ........................................................... 1-14

Troubleshooting and Warranty Information ................................. 1-16

HARDWARE DESCRIPTION

LEDs ........................................................................................... 2-1

HPUSB-ICE/USB-ICE LEDs ................................................. 2-1

HPPCI-ICE LEDs .................................................................. 2-2

Pod LEDs ............................................................................... 2-2

Board LEDs ............................................................................ 2-3

Designing Custom Processor Boards .............................................. 2-4

Mechanical Specifications ............................................................. 2-5

HPPCI-ICE ............................................................................ 2-5

SUPPORT

Technical Support ......................................................................... 3-1

Quality Assurance ......................................................................... 3-2

REFERENCES

INDEX

HPUSB, USB, and HPPCI Emulators User’s Guide vii

PREFACE

Thank you for purchasing an Analog Devices USB- or PCI-based JTAG

emulator. The USB-based emulator family consists of the High-Perfor-

mance USB JTAG emulator and the USB JTAG emulator. The USB- and

PCI-based emulators are used in conjunction with the VisualDSP++®

development environment to create, test, and debug advanced processor

application software on Analog Devices fixed- and floating-point

JTAG-based processors.

The HPUSB-ICE system provides state-of-the-art support for

JTAG-compliant Analog Devices processors. Key features of the

HPUSB-ICE include:

• Plug-n-Play, USB 2.0 compliant

• High-speed USB device

•Windows

®2000, Windows XP, or Windows Vista operation

• Multiple processor I/O voltage support

1.8V, 2.5V, and 3.3V compliance

5V tolerant in all ranges

• Multiprocessor support

• JTAG clock operation up to 50 MHz

viii HPUSB, USB, and HPPCI Emulators User’s Guide

The HPPCI-ICE system provides state-of-the-art support for

JTAG-compliant Analog Devices processors. Key features of the

HPPCI-ICE include:

• Plug-n-Play, PCI 2.2 compliant

• Windows 2000, Windows XP, or Windows Vista operation

• Multiple processor I/O voltage support

1.8V, 2.5V, and 3.3V compliance

5V tolerant in all ranges

• Multiprocessor support

• JTAG clock operation up to 50 MHz

The JTAG clock frequency is dependent on the delay characteris-

tics of the JTAG interface and processor on the target board.

The USB-ICE system provides state-of-the-art support for selected

processors. Key features of the USB-ICE include:

• Plug-n-Play, USB 2.0 compliant

• High-speed USB device

• Windows 2000, Windows XP, or Windows Vista operation

• Multiple processor I/O voltage support

1.8V, 2.5V, and 3.3V compliance

5V tolerant in all ranges

• Multiprocessor support

• JTAG clock operation of 10 MHz

HPUSB, USB, and HPPCI Emulators User’s Guide ix

Preface

Analog Devices carries a wide range of in-circuit emulation products.

To learn more about Analog Devices emulators, go to:

http://www.analog.com/processors/

Purpose of This Manual

The HPUSB, USB, and HPPCI Emulators User’s Guide provides directions

for installing the High-Performance USB-ICE, USB ICE, and High-Per-

formance HPPCI-ICE hardware and software on your PC. The manual

also describes how to configure and use the components of the USB- and

PCI-based emulators.

Intended Audience

This manual is intended to help the customer understand the features and

operation of the HPUSB-ICE, HPPCI-ICE, and USB-ICE so they can

begin using VisualDSP++.

Manual Contents

The manual consists of:

• Chapter 1, “Getting Started” on page 1-1

Provides software and hardware installation procedures, PC system

requirements, and basic board information.

• Chapter 2, “Hardware Description” on page 2-1

Provides information on hardware aspects of the USB-based

emulators.

• Chapter 3, “Support” on page 3-1

Provides technical support contact information.

Technical or Customer Support

x HPUSB, USB, and HPPCI Emulators User’s Guide

• Chapter 4, “References” on page 4-1

Provides information on different resources available in developing

an application based on an Analog Devices processor.

Technical or Customer Support

You can reach Analog Devices, Inc. Customer Support in the following

ways:

• Visit the Embedded Processing and DSP products Web site at

http://www.analog.com/processors/technicalSupport

• E-mail tools questions to

[email protected]

• E-mail processor questions to

[email protected] (World wide support)

[email protected] (Europe support)

[email protected] (China support)

• Phone questions to 1-800-ANALOGD

• Contact your Analog Devices, Inc. local sales office or authorized

distributor

• Send questions by mail to:

Analog Devices, Inc.

One Technology Way

P.O. Box 9106

Norwood, MA 02062-9106

USA

This manual suits for next models

Table of contents

Other Analog Devices Computer Hardware manuals

Analog Devices

Analog Devices ADT7460 User manual

Analog Devices

Analog Devices EVAL-AD7715-5EB User manual

Analog Devices

Analog Devices ADSP-CM419F User manual

Analog Devices

Analog Devices EZ-KIT Lite ADSP-BF537 User manual

Analog Devices

Analog Devices ADSP-2106x SHARC User manual

Analog Devices

Analog Devices Linear ADP5070 Quick setup guide

Analog Devices

Analog Devices Linear LTM 4700 User manual

Analog Devices

Analog Devices MICROCONVERTER ADUC812 User manual

Analog Devices

Analog Devices ADP1046A User manual

Analog Devices

Analog Devices MicroConverter ADuC832 User manual

Analog Devices

Analog Devices SHARC ADSP-21020 User manual

Analog Devices

Analog Devices EVAL-ADAU1860 User manual

Analog Devices

Analog Devices EVAL-ADN4650EB1Z User manual

Analog Devices

Analog Devices EVAL-ADPD6000 User manual

Analog Devices

Analog Devices ADSP-2181 User manual

Analog Devices

Analog Devices Linear LTC3114-1 Quick setup guide

Analog Devices

Analog Devices SigmaDSP ADAU1463 User manual

Analog Devices

Analog Devices ADM1060 User manual

Analog Devices

Analog Devices SHARC Series User manual

Analog Devices

Analog Devices AD5100 User manual

Analog Devices

Analog Devices Blackfin User manual

Analog Devices

Analog Devices ADSP-2186 User manual

Analog Devices

Analog Devices AD73360L User manual

Analog Devices

Analog Devices ADSP-BF609 EZ-KIT Lite User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual