AMP Lighting ASM-2407 Operating and safety instructions

AMP®Low Voltage Landscape Lighting

AMP® Path & Area Light Stem

ASM-2407 & ASM-1203

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Important Safety Instructions: Read Before Installation

INSTALLATION & MAINTENANCE GUIDE

This luminaire is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. Warning: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that

are suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire, or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

www.amplighting.com

–2–

SAVE THESE INSTRUCTIONS

AMP®Path & Area Light Stem

ASM-2407 & ASM-1203

Important Safety Instructions: Read Before Installation

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3900

Parts Required (sold separately)

–3–

Package Contents

A. (1) Stem

A. (1) Hat

B. (1) Bulb

C. Stake

Product Dimensions

Magnum Hat Pictured Here on

Standard stem

Magnum Hat Pictured Here on

Mini stem

9”

2 1/2”

22 1/2”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

Remove Stem Top

AMP®Path & Area Light Stem

ASM-2407 & ASM-1203

Loosen the stem top and remove

it from the stem.

Install Bulb

Insert the bulb with the correct

wattage and type marked on the

xture label and push rmly into

place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Socket

Bulb

Install Stem Top

Place the stem top over the

bulb and thread the stem top

onto the stem. Hand tighten

until snug.

Stem Top

Stem

Stem Top

Stem

[email protected] • 813.978.3900

–5–

Install Stake

Install Stem to Stake

Determine the desired location for

mounting the xture. Hammer the

stake into the ground until the ange

of the stake is ush to grade. To avoid

damage to the stake, place a board

on top of the stake while hammering.

NOTE: If the ground is hard and the

stake is difcult to install, make a

crosscut in the ground using a at

shovel.

Board

Stake

Soil

Ground

Clear away an area in the ground

at the wireway slot on the top

of the stake. Lay the luminaire

pigtail into the wireway slot and

attach the stem onto the stake.

Tighten until snug.

Stem

Stake

Pigtail

Wireway Slot

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

Wire Connection

AMP®Path & Area Light Stem

ASM-2407 & ASM-1203

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main

supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

Thread the hat of your choice

onto the stem top. Hand tighten

until snug.

Note: You will not need to use the

nial to secure the hat onto the

stem with the traditional style

AMP hats. You will instead use the

threaded coupler to screw the hat

directly onto the stem top.

Stem Top

Hat of your choice

Install Hat to Stem

–6––6–

[email protected] • 813.978.3900

–7–

Install/Replace Bulb

Remove the hat and stem top to expose the bulb. Replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the stem top and hat.

IMPORTANT: Bulbs must be protected from moisture and dust at all

times. Always reinstall the stem top and hat when removed.

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

IS-ASM-2407/1203-ver3.pdf

This manual suits for next models

Table of contents

Other AMP Lighting Landscape Lighting manuals

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting HydraPro AWL-5006-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AMP RGBW Max PinnaclePro LED Spotlight Operating and safety instructions

AMP Lighting

AMP Lighting ADL-2010 Series Operating and safety instructions

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting APL-3015-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Operating and safety instructions

AMP Lighting

AMP Lighting AHS-7004-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting HydraPro AWL-5005-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting G2 ControlPro Series Operating and safety instructions

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Operating and safety instructions

AMP Lighting

AMP Lighting 3602 Series Operating and safety instructions

AMP Lighting

AMP Lighting AAR-I-B-BZ Series Operating and safety instructions

AMP Lighting

AMP Lighting AlpinePro Path Light Operating and safety instructions

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting AtomPro Mini LED Spotlight Operating and safety instructions

AMP Lighting

AMP Lighting ASSI-9008-50-BK Operating and safety instructions

AMP Lighting

AMP Lighting ASPL-3028 Series Operating and safety instructions

AMP Lighting

AMP Lighting PinnaclePro AAL-1017-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting PinnaclePro Mini Operating and safety instructions

AMP Lighting

AMP Lighting Deck-DesignPro Classic Operating and safety instructions

AMP Lighting

AMP Lighting MR16 HydraPro Operating and safety instructions

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Operating and safety instructions

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Volt

Volt 2-in-1 Tiki-Brass Torch Light installation instructions

Malibu Boats

Malibu Boats CM110P instructions