AMP Lighting PinnaclePro Mini Operating and safety instructions

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® PinnaclePro Mini

AAL-1018-4-X-XX

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

[email protected] • 813.978.3900

Product Dimensions

–3–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Package Contents

A. (1) Fixture

B. (1) Stake

2.75”

4.5”

2.75”

1.75”

Remove Glare Guard and Shield from Fixture

Unlock the set screw and remove the

glare guard from the shield. Loosen the

shield and remove it from the xture.

Glare Guard

Set

Screw

Shield

Fixture

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

Install MR11 Lamp

Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch lamp with bare

hands. Use soft cloth to handle lamp.

Socket

MR11 Lamp

(sold

separately)

Install Glare Guard and Shield to Fixture

Attach the shield back onto the

xture. Place the glare guard over the

shield and secure with the set screw.

Tighten until snug.

Glare Guard

Set

Screw

Shield

Fixture

Install Stake

Board

Stake

Soil

Ground

Determine the desired location for

mounting the xture. Hammer the stake

into the ground until ange of stake is ush

to grade. To avoid damage to the stake,

place a board on top of the stake while

hammering.

NOTE: If the ground is hard and the stake

is difcult to install, make a crosscut in the

ground using a at shovel.

Install Fixture to Stake

Clear away an area in the ground at

the wireway slot on top of the stake.

Lay the luminaire pigtail into the

wireway slot and screw the xture

onto the stake. Tighten until snug.

Fixture

Pigtail

Wireway Slot

Stake

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

[email protected] • 813.978.3900

–7–

Install/Replace Bulb

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

Wire Connections

Strip both leads from the luminaire pigtail. Using two wire connectors (sold

separately), connect the leads from the luminaire to the main supply cable

leads.

Pigtail

Main Supply Cable

Wire Connectors

Remove the glare guard and the shield to expose the lamp and replace

it with the correct wattage and type marked on the xture label. Then

reinstall the shield and the glare guard to the xture.

IMPORTANT: Halogen lamps must be protected from moisture and dust at all

times. Always reinstall the shield when moved.

IS-AAL-1018-4-X-XX-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Other AMP Lighting Landscape Lighting manuals

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting HydraPro AUL-8001-25-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting APL-3015-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Operating and safety instructions

AMP Lighting

AMP Lighting AlpinePro Path Light Operating and safety instructions

AMP Lighting

AMP Lighting HydraPro AWL-5005-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting PolynesianPro Operating and safety instructions

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting LocketPro Mini Hanging Light Operating and safety instructions

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Operating and safety instructions

AMP Lighting

AMP Lighting VariantPro Spotlight Operating and safety instructions

AMP Lighting

AMP Lighting Slimline VAC-SLMTIMER1 Operating and safety instructions

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Operating and safety instructions

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Operating and safety instructions

AMP Lighting

AMP Lighting AMP RGBW Max PinnaclePro LED Spotlight Operating and safety instructions

AMP Lighting

AMP Lighting InfusePro Step Light Operating and safety instructions

AMP Lighting

AMP Lighting G2 ControlPro Series Operating and safety instructions

AMP Lighting

AMP Lighting Sol Box ASDL-2014-P-BK Operating and safety instructions

AMP Lighting

AMP Lighting AAR-I-B-BZ Series Operating and safety instructions

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Volt

Volt 2-in-1 Tiki-Brass Torch Light installation instructions

Malibu Boats

Malibu Boats CM110P instructions