Amico AP14000 User manual
USER MANUAL
PORTABLE AIR CONDITIONER
AP14000
Thank you for selecting super quality air conditioner. Please be sure to
read this manual carefully before using it. Any question, please contact
the professional service for help.
1
CONTENTS
CONTENTS……………………………………………………..1
IMPORTANT SAFETY INSTRUCTIONS…………………..2-4
INSTALLATION……………………………………………….5,6
PARTS NAME……………………………………………………7
CONTROL PANEL……………………………………………...8
REMOTE CONTROL………………………………………….9
OPERATING METHOD………………………………….…10,11
WATER DRAINAGE…………………………………………...12
MAINTENANCE………………………………………………..13
TROUBLE SHOOTING………………………………………..14
2
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS
APPLIANCE.
BASIC SAFETY PRECAUTIONS
WARNINGTo reduce the risk of fire, electric shock, or
injury to persons when using this appliance, follow basic precautions,
including the following:
•Do not attempt to repair or replace any part of your air conditioner unless it is
specifically in this manual. All other services should be referred to a qualified
technician.
•If the power cord becomes worn or damaged, the cord should only be
replaced by a qualified service technician using genuine replacement parts.
•The air conditioner should be plugged into its own grounded 15A, 60 Hz., 120
VAC circuit.
•Do not plug other appliances into the same outlet; it can overload the circuit
and cause a fire or electric shock.
•Do not remove the round grounding prong from the plug. It can result in the
risk of electric shock.
•This air conditioner is not designed for use by young children. Young children
should be supervised to ensure that they do not play with or climb on the air
conditioner.
•Be sure all packaging materials are removed from the air conditioner before
use. It can result in personal injury.
•Do not disassemble or modify the air conditioner or the power cord. It can
result in the risk of electric shock or fire.
•Do not place the power cord or air conditioner near a heater, radiator, or other
heat source. It can result in the risk of electric shock or fire.
•Do not use this or any appliance near flammable gasoline, benzene, thinner,
etc. It can result in the risk of electric shock or fire.
•Make sure the power cord is plugged firmly and completely into the outlet. It
can result in the risk of electric shock or fire.
•Do not start or stop operation by plugging in or unplugging the power cord. It
can result in the risk of electric shock.
•If the air conditioner is making unusual sounds or is emitting smoke or an
unusual odor, unplug it immediately. It can result in the risk of electric shock
or fire.
•Do not use if the electrical socket is loose or damaged. It can result in the risk
of electric shock or fire.
•Do not operate with wet hands or in a damp environment. It can result in the
risk of electric shock.
•Do not use this or any electrical appliance if you smell gas. It can result in the
3
risk of fire or explosion.
•Turn off and unplug the air conditioner before cleaning to avoid the risk of
electric shock.
•Do not clean the unit with water. Water can enter the unit and damage the
insulation, creating a shock hazard. If water enters the unit, unplug it
immediately and contact Customer Service. It can result in the risk of electric
shock.
•Use two or more people to lift and install the unit. Failure to do so can cause
back injury or other injuries.
CAUTION To reduce the risk of fire, electric shock, or
injury to persons when using this appliance, follow basic precautions,
including the following:
•To avoid possible cuts, avoid contacting the metal parts of the air conditioner
when removing or reinstalling the filter. It can result in the risk of personal
injury.
•Do not block the air inlet or outlet of the air conditioner. Reduced air flow will
result in poor performance and could damage the unit.
•Always grasp the plug when plugging in or unplugging the air conditioner.
Never unplug by pulling on the cord. It can result in the risk of electrical shock
and damage.
•Always turn off and unplug the air conditioner when it will not be used for
extended period of time. This conserves energy and reduces the chance of
accidents.
•Secure the wheels with blocks to prevent the air conditioner from rolling on
smooth floors.
•Install the air conditioner on a sturdy, level floor capable of supporting up to
110 lbs (50 kg). Installation on a weak or unlevel floor can result in the risk of
property damage and personal injury.
•Make sure the air conditioner is the correct size for the area you wish to cool.
Using an air conditioner that is the wrong size can waste energy and damage
the air conditioner.
•Close all doors and windows to the room for most efficient operation.
•To prevent damage to the surface finish, use only a soft cloth to clean the air
conditioner. Do not use wax, thinner, or a strong detergent.
•To prevent spills and property damage, be sure to drain the air conditioner
properly.
•To prevent the coils from freezing, do not operate the air conditioner if the
room temperature is below 62°F (17°C).
•Do not position the air conditioner so that pets or house plants are exposed to
the direct air flow. It can result in the risk of injury to pets or house plants.
•This air conditioner is designed for normal household use. Do not use for
cooling pets, foods, precision machinery, or art objects.
4
•Do not drink the water from the drain pan. Dispose of it properly outdoors or
down the drain.
•Do not operate air conditioner without the filter securely in place. Operation
without the filter could damage the unit.
•Clean the filter every two weeks, or more often if needed.
ELECTRICAL SAFETY
WARNING
Electrical Shock Hazard Failure to follow these instructions can result in
death, fire, or electrical shock.
•This unit must be properly grounded.
•Do not, under any circumstances, cut or remove the ground prong.
•If you do not have a properly grounded outlet, or if there is any doubt
that the outlet is not properly grounded, a qualified electrician should
check the outlet and circuit, and, if necessary, install a properly
grounded outlet.
•This air conditioner must be plugged into a grounded 60 Hz, 120 VAC
outlet protected by a 15 amp time delay fuse or circuit breaker.
•This air conditioner must be installed in accordance with national wiring
codes.
•Do not alter or modify the plug or cord of this air conditioner. If the power
cord becomes worn or damaged, the cord should only be replaced by a
qualified service technician using genuine replacement parts.
•Do not use an extension cord.
Due to potential safety hazards, the use of an adapter plug is strongly
discouraged. For temporary connections, use only a UL-listed adapter.
Ensure that the large slot in the adapter is aligned with the large slot in
the outlet.
To prevent damage to the adapter’s Ground terminal, hold the adapter in place
while plugging in or unplugging the air conditioner.
SAVE THESE INSTRUCTIONS
5
INSTALLATION
Selection of installation location
· Install the unit on a flat and dry place.
Leave at least 50cm space all around the unit.
· Fix the end of the exhaust duct to the exhaust terminal of the unit.
· Half-open the window and let the air outlet duct get through.
The window slider kit has been designed to fit most standard vertical and
horizontal windows. It is adjustable.
Wrong mounting
· The bend of the exhaust pipe is very important.
Wrong mounting can occur wrong working of the unit.
Take care to prevent any sharp bow or bend in the
exhaust hose, the exhaust air must flow freely.
6
WARNING
The length of the exhaust pipe is specially designed according to the
specification of this product.
Do not replace or prolong it with your own private hose as this could cause
mal-function.
BE CAREFUL: Use the shortest possible length. When mounting, we advise to
keep the exhaust pipe in a horizontal position. When the hole is not in use, use
the cap to cover the hole.
7
PARTS NAME
Front
1. Control panel
2. Air outlet
3. Signal receiver
4. Adjustable air flow
5. Handle
Back
6. Castor
7. Evaporator air inlet
8. Up drain port( used when Continuous Drainage
or in dry mode)
9. Power cord
10.Down drain port(when water tank is full or not
use any longer in winter season)
Check all the accessories included in the package and please refer to the
installation instructions for their usage.
Accessories
8
CONTROL PANEL
1. ON/OFF button: press this button to turn on/off the unit.
2. MODE button: press this button to select automatic adjusting, Cool, Dry or Fan
mode.
3. FAN button: press this button to select high, middle or low fan speed.
4. TIME button: press this button to set timer-on, timer-off or no-timer.
5. UP & DOWN button: press these buttons to set room temperature or time
when in Time On/Off mode.
6. LCD display: display different signals accordingly.
Note: To vary from Fahrenheit to Celsius, press both UP and DOWN button
at the same time.
9
REMOTE CONTROL
1. High fan speed
2. Middle fan speed
3. Low fan speed
4. Swing
5. Timer
6. Up
7. Down
8. Cool mode
9. Dry mode
10. Fan mode
11. Celsius and Fahrenheit exchange
12. Power (same as ON/OFF)
Table of contents
Other Amico Air Conditioner manuals
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu Inverter ASBA30JFC operating manual
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Daikin
Daikin FXLQ20MAVE Operation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
