AMFLOW A6 User manual
A & H Enterprises, Inc.
11812 NE 116th Street
TEL:
+425.883.4040
Kirkland, WA 98034 USA
FAX:
+425.823.1962
www.amflow.com
EMAIL:
QUICK START: HART WIRING
Copyright©2016 A & H Enterprises., Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 1 of 21
Amflow®
AMFLOW®
A6 VALVE ACTUATOR
with
AM7E FLOW CONTROL VALVE
A6 Quick Start: Hart
CONTENTS
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 2 of 21
AMFLOW®
Contents
1. What is Included
2. Installation: Actuator
3. Installation: Valve
4. Electrical Set-Up: Actuator
5. Wiring: Hart
6. Optional Ethernet Set-Up
7. Connection to Device
8. Caution Information
9. Safety Information
10. Suport
11. Representatives
A6 Quick Start: Hart
WHAT IS INCLUDED
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 3 of 21
AMFLOW®
What is included with your Amflow®product?
☐ACTUATOR: A6
Actuator
Adjustment Handle
Adjustment Handle Mounting Screw and Lock Washer
Installation Manual & Service Manual
A6 Quick Start: Hart
INSTALLATION
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 4 of 21
AMFLOW®
Installation: Actuator
Step 1
Cut-out panel for mounting per instructions in Installation
Manual.
A6 Quick Start: Hart
INSTALLATION
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 5 of 21
AMFLOW®
Step 2
Attach actuator base plate assembly to front of panel.
Step 3
Mount actuator to base plate assembly using M6x16 SHCS.
A6 Quick Start: Hart
INSTALLATION
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 6 of 21
AMFLOW®
Step 4
Prior to installing valve, confirm handle is in manual position.
AUTOMATION MODE
(Handle at Side)
MANUAL MODE
(Handle at Front)
A6 Quick Start: Hart
INSTALLATION
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 7 of 21
AMFLOW®
Installation: Valve
Step 1
Place FLANGE ADAPTOR onto VALVE STEM prior to installation.
Step 2
Insert VALVE ADAPTOR LINK into FLANGE ADAPTOR.
Place valve into BEARNG HOUSING.
VALVE ADAPTOR LINK
FLANGE ADAPTOR
BEARING HOUSING
VALVE ADAPTOR LINK
A6 Quick Start: Hart
INSTALLATION
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 8 of 21
AMFLOW®
Step 3
While valve is being inserted into BEARING HOUSING; rotate
valve to align VALVE ADAPTOR LINK while handle is in manual
mode.
Step 4
Once properly aligned and engaged, tighten three (3)
SETSCREWS to lock valve in place.
SETSCREWS
SETSCREWS
A6 Quick Start: Hart
INSTALLATION
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 9 of 21
AMFLOW®
Controls: Applicable to AM7E-001 Valve Only
There are two controls used to operate the AM7E-001 flow control valve:
The first control is the SWITCH by which the operator can select
a high or low flow range.
The second is the flow rate ADJUSTMENT KNOB. This control
knob allows the operator to set a desired flow rate in either the
high flow or low flow range.
AM7E-001 ADAPTOR with
SWITCH
View of AM7E-001
looking up from bottom of OUTLET BODY
toward bottom of ADAPTOR
A6 Quick Start: Hart
WIRING
Copyright©2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 10 of 21
AMFLOW®
ELECTRICAL SET-UP: Actuator Board
Both power cable and HART cable must be connected.
First, remove the electrical panel cover by loosening the four (4) screws
on the electrical box and removing the panel. Be careful not to lose the
screws.
ACTUATOR WIRING: HART
1. Connect 24VDC Power to Terminal Block 1.
2. Connect Ground to Terminal Block 2.
3. Connect the positive side of the HART cable to Terminal Block 8.
4. Connect the negative side of the HART cable to Terminal Block 9.
Terminal block wiring reference for field connections
WARNING
Incorrect wiring may
damage the unit!
Table of contents
Other AMFLOW Controllers manuals
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
