AMD Opteron 200 series User manual

User Manual

for

4U Server Blade

(Opteron™ 800MHz Hyper Transport Bus)

Aug. 2005 (Revision B)

P/N: 1230B0015201

The copyright in all material provided in this User Manual is held by Inventec Enterprise System

Corporation (IESC) or by the original creator of the material. Except as stated herein, none of the

material may be copied, reproduced, distributed, republished, downloaded, displayed, posted or

transmitted in any form or by any means, including, but not limited to, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of IESC. or the copyright

owner. Permission is granted to display, copy, distribute and download the materials in this User

Manual for personal, non-commercial use only, provided you do not modify the materials and that you

retain all copyright and other proprietary notices contained in the materials. You also may not, without

IESC’s permission, "mirror" any material contained in this Use Manual on any other server. This

permission terminates automatically if you breach any of these terms or conditions. Upon termination,

you must immediately destroy any printed materials. Any unauthorized use of any material contained

in this User Manual may violate copyright laws, trademark laws, the laws of privacy and publicity,

and communications regulations and statutes.

BroadCom®, the logos are registered trademarks of BroadCom Corporation and/or its subsidiaries in

the United States and certain other countries. All other trademarks are the property of their respective

owners.

AMD®Opteron™ is U.S. registered trademarks of AMD Corporation.

Linux is a registered trademark of Linus Torvalds.

Microsoft®and Windows NT®are U.S. registered trademarks of Microsoft Corporation.

Red Hat is a registered trademark and logos are trademarks or registered trademarks of Red Hat Inc. in

the United States and other countries.

The information in this document is provided “as is” without warranty of any kind and is subject to

change without notice. The warranties for Blade Server are set forth in the express limited warranty

statements accompanying such products. Nothing herein should be construed as constituting an

additional warranty.

This User Manual is subject to change without notice.

All brands and names are property of their respective owners.

Inventec Enterprise System Corp., 2005

About This Manual ........................................................................................................................................i

Conventions..................................................................................................................................................i

Package Contents ........................................................................................................................................ii

Safety and Regulatory Information............................................................................................................iii

Regulatory Compliance Identification Numbers....................................................................................iii

1Product Introduction .........................................................................................................................1-1

1.1 Product Features...........................................................................................................................1-2

1.2 Server Blade Layout.....................................................................................................................1-3

1.2.1 Opteron™ 200 series Server Blade Overview......................................................................1-3

1.3 Front panel....................................................................................................................................1-4

2Hardware Operation..........................................................................................................................2-1

2.1 Before You Start...........................................................................................................................2-1

2.1.1 Power Off.............................................................................................................................2-1

2.2 Battery..........................................................................................................................................2-2

2.2.1 To install the battery.............................................................................................................2-3

2.2.2 To remove the battery...........................................................................................................2-3

2.3 Processor ......................................................................................................................................2-4

2.3.1 To install the processor.........................................................................................................2-5

2.3.2 To install the heat sink..........................................................................................................2-6

2.3.3 To remove the processor and heat sink.................................................................................2-7

2.4 System Memory ...........................................................................................................................2-8

2.4.1 To install a DIMM................................................................................................................2-9

2.4.2 To remove a DIMM..............................................................................................................2-9

2.5 HDD...........................................................................................................................................2-10

2.5.1 To install the HDD .............................................................................................................2-10

2.5.2 To remove the HDD ...........................................................................................................2-11

2.6 PMC Card (Option)....................................................................................................................2-12

2.6.1 To install the PMC Card.....................................................................................................2-12

2.6.2 To remove the PMC Card...................................................................................................2-13

2.7 System Configuration Switch.....................................................................................................2-14

2.8 Server Blade...............................................................................................................................2-15

2.8.1 To Install and Remove the Server Blade............................................................................2-15

3BIOS Setup .........................................................................................................................................3-1

3.1 BIOS Setup Utility.......................................................................................................................3-1

3.2 Entering the BIOS Setup Utility...................................................................................................3-2

3.3 Keyboard Command Bar..............................................................................................................3-3

3.4 BIOS Updates...............................................................................................................................3-5

3.4.1 BIOS Requirements..............................................................................................................3-5

3.4.2 ROM Flash...........................................................................................................................3-5

3.5 Blade BMC Updates.....................................................................................................................3-6

3.6 Champs BMC Updates.................................................................................................................3-6

4Diagnostic Tools Utility Overview.....................................................................................................4-1

Figure 1-1 Opteron™ 200 series Server Blade Overview.................................................................1-1

Figure 1-2 Opteron™ 200 series Server Blade Component Locations.............................................1-3

Figure 1-3 Server Blade Front Panel Component Locations.............................................................1-4

Figure 2-1 Powering off the server blade..........................................................................................2-1

Figure 2-2 Battery Location..............................................................................................................2-2

Figure 2-3 Putting the battery into the holder ...................................................................................2-3

Figure 2-4 Pulling the battery out of the holder ................................................................................2-3

Figure 2-5 Processor Location ..........................................................................................................2-4

Figure 2-6 Pressing the locking lever down......................................................................................2-5

Figure 2-7 Heat Sink and Sponge Location ......................................................................................2-6

Figure 2-8 Putting down the heat sink...............................................................................................2-6

Figure 2-9 Rotating the fasteners to fit the heat sink.........................................................................2-6

Figure 2-10 System Memory Location..............................................................................................2-9

Figure 2-11 Inserting the DIMM into the socket...............................................................................2-9

Figure 2-12 Lifting the DIMM out of the socket...............................................................................2-9

Figure 2-13 HDD Location .............................................................................................................2-10

Figure 2-14 Locating the HDD to the HDD tray.............................................................................2-10

Figure 2-15 Installing the HDD.......................................................................................................2-11

Figure 2-16 Pressing the HDD release buttons ...............................................................................2-11

Figure 2-17 Lifting the HDD from the server blade........................................................................2-11

Figure 2-18 PMC Card Location.....................................................................................................2-12

Figure 2-19 Locating the bezels with the screws ............................................................................2-12

Figure 2-20 Installing the PMC card...............................................................................................2-12

Figure 2-21 Securing the PMC card to the blade ............................................................................2-13

Figure 2-22 Server Blade Board Switch Location...........................................................................2-14

Figure 2-23 Server Blade Location .................................................................................................2-15

Figure 2-24 Sliding the server blade fully into the bay...................................................................2-15

Figure 2-25 Pressing the release button...........................................................................................2-15

Figure 2-26 Removing the server blade ..........................................................................................2-16

Table 1-1 Front Panel LED Status.....................................................................................................1-4

Table 2-1 DIMM Installation Option 1 .............................................................................................2-8

Table 2-2 DIMM Installation Option 2 .............................................................................................2-8

Table 2-3 Server Blade Board Switch .............................................................................................2-14

Table 3-1 BIOS Setup Utility Screen Description.............................................................................3-2

Table 3-2 Keyboard Command Bar Description...............................................................................3-4

Table 3-3 BIOS Requirements Description.......................................................................................3-5

Table 4-1 Diagnostic Tools................................................................................................................4-1

This chapter provides the safety

and regulatory information of Serve

Blade.

About This Manual

1230B0015201 About This Manual i

This guide provides step-by-step instructions for the installation and maintenance information of

Blade Server.

This guide is presented for service technicians of computer equipment. Blade Server supplier assumes

that you are network administrators or IT personnel who are qualified in installing, configuring,

maintaining and servicing system hardware and software.

To make sure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

Warning: Information to prevent injury to yourself when trying to complete a task.

Caution: Information to prevent damage to the components when trying to complete

a task.

Important: Information that you must follow to complete a task.

Note: Tips and information to aid in completing a task.

1230B0015201 About This Manual ii

This section lists the items included in the server package.

Blade Unit Part List

* Not available now, will support in future.

Reference Document

Item Description

1 User Manual for 4U Blade Server Chassis (Opteron™ 800MHz

Hyper Transport Bus)

Item Description

1 AMD®Opteron™ 200 series Server Blade

2 PMC Card (Option)

3 AMD®Opteron™ 200 series Processor with Heat Sink (800MHz

Hyper Transport Bus)

4 2.5” SATA HDD 40GB/60GB

5 Very low profile DDR1-400 ECC Registered DIMM

512MB/1G/2G (Option)

6 Mini-backplane Kit*

7 COM Port Cable

1230B0015201 About This Manual iii

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, this server is assigned a

series number. This server series number can be found on the product label, along with the required

approval markings and information. When requesting certification information for this product, always

refer to this series number. This series number should not be confused with the marketing name or

model number.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interference, in which case the user

will be required to correct the interference at personal expense.

Modifications

The FCC requires the user to be noticed that any changes or modifications made to this device that are

not expressly approved by the supplier may invalidate the user’s authority to operate the equipment.

Battery Replacement Notice

Your computer is provided with an internal lithium battery or battery pack. There is a danger of

explosion and risk of personal injury if the battery is incorrectly replaced or mistreated. Unless

specific replacement instructions are provided as part of this guide, replacement is to be done by an

authorized service provider using the parts designated for this product.

For more information about battery replacement or proper disposal, contact an authorized reseller or

authorized service provider.

1230B0015201 About This Manual iv

Warning: Your computer contains an internal lithium manganese dioxide, a vanadium

pentoxide, or an alkaline battery pack. There is risk of fire and burns if the battery pack is

not handled properly. To reduce the risk of personal injury,

 Do not attempt to recharge the battery.

 Do not expose to temperatures higher than 60°C.

 Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or

water.

 Replace only with the spare parts designated for this product.

Batteries, battery packs, and accumulators should not be disposed of together with the general

household waste. To forward them to recycling or proper disposal, please use the public collection

system or return them to the supplier, the supplier’s authorized partners, or their agents.

Table of contents

Other AMD Server manuals

AMD

AMD Opteron LS20 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started