Amana PTH models Installation instructions

SS-DPTAC www.amana-ptac.com 1/07

Supersedes 5/06

Product SPecificationS

digiSmart™ Ptac

Packaged terminal air

conditioner and Heat PumP

Full Warranty

• 1stYear

• 2ndthrough5thYear—sealedsYstem

limitedWarrantY

• 2ndthrough5thYear—Parts

With

digiSmart™ControlBoard

We have designed the Amana® brand Packaged

Terminal Air Conditioner for customer comfort and

owner piece of mind. No other unit in the industry

offers so many energy management features as

standard. With the ability of the DigiSmart™ PTAC to

reduce operating costs by 35%, there is no need to settle

for anything less than an Amana® brand PTAC.

Features

• EnergyEfciency—Amana® brand PTACs have an EER

of up to 12.8 (on heat pumps, a COP of up to 3.6) to

keep energy consumption to a minimum

• On-boardEnergyManagementSystem—

Amana® brand units are equipped with EMS

technology to better control room temperature and

save energy dollars

• DigiSmart™ControlBoard—ready for wireless or

wired operation

• ProgrammableSet-backProgram—owner-controlled

settings allows automatic temperature setback when

unit is idle

• NetworkReady—Amana® brand DigiSmart™ units

connected to a Tridium JACE controller automatically

build their own wireless network

• DigiSmart™Suiteof Peripherals—remote occupancy

sensor, remote thermostat, RF antennas, and RF

platform controller provide everything you need to

reduce energy costs by 35%

UL (Underwriters Laboratories)

USA and Canada

ARI (Air Conditioning &

Refrigeration Institute)

Standards 310/380

SS-DPTAC www.amana-ptac.com 3

2 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

digiSmart™ SyStem

The Amana® DigiSmart™ suite of products work together to let you control and monitor each air conditioning unit.

in-room ProductS

A PTAC—The PTAC itself contains all the processing power and software to manage energy

consumption, unit status, and comfort performance.

B OccupancyControl—The remote sensor above the door determines if the room is occupied

or not. If occupied, normal routines run, but if unoccupied the PTAC can change temperature

settings based upon congurations set by owner.

C RemoteThermostat—The DigiSmart™ remote thermostat works just like the one at home but

unlike other PTACs does not disable the unit’s own controls. Remote and PTAC control panels

work at the same time and show the same information.

• Set-up—Best of all, no wiring. All of the peripheral devices can be installed by your handy

man without calling an expensive electrician. A touch of a button connects the peripherals to

the air conditioner in that room.

ProPerty-Wide netWork

• The Tridium Jace™ controller connects all Amana® DidgSmart™ PATCs in a property automatically through a self-detection

routine.

• Once connected to your PC, the status and operating condition of each unit can be viewed remotely and its settings changed.

• The Tridium Jace™ controller through its NiagaraAX protocol has already built connections to more than 100 commercially

available building management systems. So once the network is up and running, Amana® PTACS can be integrated with your

existing building management system or if desired, controlled remotely through the internet.

For more information, go to www.amana-ptac.com.

Product featureS

On-Board Energy Management System (EMS)

• Set-BackMode—the owner can determine amount of time unit is left ‘untouched’ (buttons

not pushed) before the PTAC begins a set-back routine and new thermostat temperature takes

effect. All set-back routines can be changed by owner.

• MaintenanceStatus—Separate green LED indicator light to show if unit requires

maintenance

• ElectronicTemperatureLimits–owner can set separate cooling and heating temperature

ranges and limit operation to one-degree increments, saving energy by preventing guests

from over-cooling or over-heating.

• EnhancedDehumidicationCoolingMode—the unit can be set to lengthen cooling cycles

while the room is occupied or unoccupied. This passes more air through the unit while the coil is below the dew point,

increasing the amount of moisture removed.

• UnitDiagnostics—when switched to diagnostics mode, the unit shows ten different self-diagnosis codes to help keep the

unit running most efciently.

• FreezeProtection—when sensors show an outdoor temperature of 40ºF or below, the unit automatically activates the fan

motor and the electric or hydronic heat to help prevent burst water pipes or broken xtures caused by freezing temperatures.

• ExtendedHeatingwiththeHeat-Pump—heat pump models will operate in heat-pump mode with external temperatures as

low 24ºF to provide additional energy savings.

• 30-SecondFan-Off Delay—the fan continues to run for 30 seconds after the compressor has stopped or after electric heat

has been turned off. This improves efciency by dispersing the cooled or heated air still on the coil into the room.

Maintenance

Indicator Light

SS-DPTAC www.amana-ptac.com 3

2 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

emS acceSSorieS (@ WWW.amana-Ptac.com)

• DigiDoor: Wireless RF Occupancy Sensor

• DigiPlatform: WEB-Enabled Platform Controller

• DigiStat” RF Wireless Remote-Mounted Thermostat

• DigiSmart Control Board Upgrade Kit

• DigiTenna: Wireless RF Gateway Transceiver Antenna

Ptac acceSSorieS (@ WWW.amana-Ptac.com)

• Wall Sleeves

• Grilles

• Condensate Drain Kits

• Thermostats – wired and wireless

• Wire Harness Kit

• Remote Escutcheon Kit (10 pack)

• Sub-base Kits

• Duct Extension Kits

• Vent Door Kits

• Power Door Kit – 230/208V & 265V

• Hydronic Valves and Kits

nomenclature

SS-DPTAC www.amana-ptac.com 5

4 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

Ptc modelS — cooling/electric Heat

Model 1, 7, 9, 10, 12 PTC

073B**A-

PTC

074B**A-

PTC

093B**AM

PTC

094B**AM

PTC

123B**AM

PTC

124B**AM

PTC

153B**AM

PTC

154B**AM

Voltage ¹, 3, ¹¹ 230/208 265 230/208 265 230/208 265 230/208 265

Capacity

(BTU/h)

M Models

M= 7,100/

6,900 M = 7,100 9,100/

8,900 9,100 12,000/

11,900 12,000 14,000/

13,900 14,000

N Models

N= 7,400/

7,300 N = 7,300 N/A N/A N/A N/A N/A N/A

Amps¹² 2.8/3.0 2.3 3.7/3.8 3.0 4.6/5.0 4.3 6.3/6.9 5.9

Watts¹² 610/595 610 790/775 790 1,110/

1,100 1,130 1,470/

1,450 1,470

EER

M Models

M= 11.6/11.6 M = 11.6 11.5 11.5 10.8 10.8 9.5 9.5

N Models

N= 12.4/12.8 N = 12.4 N/A N/A N/A N/A N/A N/A

Unit without Electric Heater

Min. Circuit

Amps 2, 4, 12 4.0 3.6 5.1 4.4 6.4 5.7 8.8 7.7

CFM

(Cool/Wet

Coil)

High 245/240 245 245/240 245 325/315 325 325/315 325

Low 220/205 220 220/205 220 250/229 250 250/220 250

CFM (Dry

Coil)

High 265/260 265 265/260 265 345/335 345 345/335 345

Low 230/215 230 230/215 230 265/235 265 265/235 265

Ventilated Air, CFM

(Fan Only)* 65* 65* 65* 65* 70* 70* 70* 70*

Ventilated Air, CFM

(Compressor

& Fan)*

65* 65* 65* 65* 70* 70* 70* 70*

Dehumidication

(Pints/Hr.) 1.6 1.6 2.6 2.6 3.5 3.5 4.4 4.4

Net Weight (lbs.) 90 90 95 95 105 105 110 110

Shipping

Weight (lbs.) 105 105 110 110 120 120 125 125

- Denotes M or N models

Approximately 95 CFM with optional power vent kit. Actual vent CFM performance will vary due to application and installation conditions.

Notes:

1– All 265-volt models must use an Amana®brand sub-base (PTSB4**E) or an Amana®brand hard-wire kit (PTPWHWK4).

2– Minimum Circuit Ampacity (MCA) ratings conform to the National Electric Code; however, local codes should apply.

3– Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.

Minimum voltage on 265-volt models is 238.5 volts; maximum is 291.5 volts.

4– Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style

time-delay fuses (included and factory-installed on all Amana®brand 265-volt chassis). See heater performance for total MCA.

5– Heating capacity and efciency based on unit operation without condensate pump; unit automatically switches to electric heat

at approximately 24°F outdoor ambient.

6– Total watts for 12,000 and 15,000 BTU/h models; subtract 70 watts for PT07/09*B**A*

7– Specify two-digit heater kW size to complete model number.

8– Total amps for 12,000 and 15,000 BTU/h models; subtract 0.2 amps for PT07/09*B*A*.

9– R-22 refrigerant used in all systems.

10– All units meet or exceed ASHRAE 90.1 standards.

11– All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.

12– Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to com-

pressor only.

Product SPecificationS

SS-DPTAC www.amana-ptac.com 5

4 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

Voltage

Electric

Heater

Size (kW)

No. of

Stages

Nominal Heating (BTU/h) Total

Watts6 Total Amps8

Minimum

Circuit

Ampacity²

MOD4

(amps)

Power

Cord

@ 230V @ 208V @ 265V

230/208V 2.5/2.0 1 8,500 6,800 - - 2,650/2,140 11.5/10.2 14.2 15 6 - 15 P

230/208V 3.5/2.9 1 12,000 9,900 - - 3,650/3,040 15.8/14.5 19.6 20 6 - 20 P

230/208V 5.0/4.1 1* 17,100 14,000 - - 5,150/4,240 22.3/20.3 27.7 30 6 - 30 P

265V 2.5 1 - - - - 8,500 2,650 10.0 12.4 15 7 - 20 P

265V 3.7 1 - - - - 12,600 3,850 14.6 18.1 20 7 - 20 P

265V 5.0 1* - - - - 17,100 5,150 19.5 24.2 25 7 - 30 P

* PTH/PTC09*B50*G/K has the same airow as a PTC/PTH12*B***G (not available on 7,000 BTU/h models).

Notes:

1– All 265-volt models must use an Amana®brand sub-base (PTSB4**E) or an Amana®brand hard-wire kit (PTPWHWK4).

2– Minimum branch circuit ampacity ratings conform to the National Electric Code; however, local codes should apply.

3– Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.

Minimum voltage on 265-volt models is 238.5 volts; maximum is 291.5 volts.

4– Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style

time-delay fuses (included and factory-installed on all Amana®brand 265-volt chassis).

5– Heating capacity and efciency based on unit operation without condensate pump; unit automatically switches to electric heat

at approximately 24°F outdoor ambient.

6– Total watts for 12,000 and 15,000 BTU/h models; subtract 70 watts for PT07/09*B**A*

7– Specify two-digit heater kW size to complete model number.

8– Total amps for 12,000 and 15,000 BTU/h models; subtract 0.2 amps for PT07/09*B*A*.

9– R-22 refrigerant used in all systems.

10– All units meet or exceed ASHRAE 90.1 standards.

11– All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.

Ptc and PtH modelS — electric Heat Performance

(Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Conguration)

Product SPecificationS (cont.)

All units come with factory-installed power cords.

All units less than 250 volts come with LCDI device.

Power Receptacle Conguration

NEMA6-30R; 250V receptacle,

used on 230/208V units

NEMA7-30R; 277V receptacle,

used on 265V units

NEMA6-15R; 250V receptacle,

used on 230/208V units

GNEMA6-20R; 250V receptacle,

used on 230/208V units

NEMA7-20R; 277V receptacle,

used on 265V units

277V Rating Power Cord Plugs

NEMA 7 Conguration

20 amp

30amp

250V Rating Power Cord Plugs with LCDI Device

NEMA 6 Conguration

Power Cord Plugs

15 amp 20 amp

30amp

PoWer cord configuration

contract Bid SPecificationS

Please visit www.amana-ptac.com to download the contractor bid specications information.

SS-DPTAC www.amana-ptac.com 7

6 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

Model 1, 7, 9, 10, ¹² PTH073B**A- PTH

074B**A-

PTH

093B**AM

PTH

094B**AM

PTH

123B**AM

PTH

124B**AM

PTH

153B**AM

PTH

154B**AM

Voltage 1, 3, 11 230/208 265 230/208 265 230/208 265 230/208 265

Capacity

(BTU/h)

M Models

M=7,000/

6,800 M=7,000 9,100/

8,900 9,100 12,000/

11,800 12,000 14,000/

13,900 14,000

N Models

N=7,400/

7,300 N=7,300 N/A N/A N/A N/A N/A N/A

Amps 2.8/3.0 2.3 3.5/3.8 3.0 4.6/5.0 4.3 6.3/6.9 5.9

Watts¹² 605/585 605 790/775 790 1,110/1,090 1,110 1,505/1,495 1,505

M Models

M=11.6/11.6 M=11.6 11.5 11.5 10.8 10.8 9.3 9.3

EER

N Models

N=12.4/12.8 N=12.4 N/A N/A N/A N/A N/A N/A

Units without Electric Heater

MCA ², 4, ¹² 4.0 3.6 5.1 4.4 6.4 5.7 8.8 7.7

CFM

(Cool/Wet Coil)

High

245/240 245 245/240 245 325/315 325 325/315 325

Low 220/205 220 220/205 220 250/229 250 250/220 250

CFM (Dry Coil)

High 265/260 265 265/260 265 345/335 345 345/335 345

Low

230/215 230 230/215 230 265/235 265 265/235 265

Ventilated Air, CFM

(Fan Only)* 65* 65* 65* 65* 70* 70* 70* 70*

Ventilated Air, CFM

(Compressor and Fan)* 65* 65* 65* 65* 70* 70* 70* 70*

Dehumidication

(Pints/Hr.) 1.6 1.6 2.6 2.6 3.5 3.5 4.4 4.4

Net Weight (lbs.) 95 95 100 100 110 110 115 115

Shipping Weight (lbs.) 110 110 115 115 125 125 130 130

- Denotes M or N models

* Approximately 95 CFM with optional power vent kit; actual vent CFM performance will vary due to application and installation conditions.

** EER = Energy Efciency Rating per Air Conditioning & Refrigeration Institute (ARI) and Canadian Standards Association (CSA) EEV Test

Procedures.

Notes:

1– All 265-volt models must use an Amana®brand sub-base (PTSB4**E) or an Amana®brand hard-wire kit (PTPWHWK4).

2– Minimum Circuit Ampacity (MCA) ratings conform to the National Electric Code; however, local codes should apply.

3– Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.

Minimum voltage on 265-volt models is 238.5 volts; maximum is 291.5 volts.

4– Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style

time-delay fuses (included and factory-installed on all Amana®brand 265-volt chassis). See heater performance for total MCA.

5– Heating capacity and efciency based on unit operation without condensate pump; unit automatically switches to electric heat

at approximately 24°F outdoor ambient.

6– Total watts for 12,000 and 15,000 BTU/h models; subtract 70 watts for PT07/09*B**A*

7– Specify two-digit heater kW size to complete model number.

8– Total amps for 12,000 and 15,000 BTU/h models; subtract 0.2 amps for PT07/09*B*A*.

9– R-22 refrigerant used in all systems.

10– All units meet or exceed ASHRAE 90.1 standards.

11– All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.

12– Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to com-

pressor only.

PtH modelS — cooling/Heat PumP/electric Heat

Product SPecificationS (cont.)

SS-DPTAC www.amana-ptac.com 7

6 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

PtH modelS — reverSe-cycle Heating Performance

Heating Capacity¹

PTH 073B**A- PTH

074B**A-

PTH

093B**AM

PTH

094B**AM

PTH

123B**AM

PTH

124B**AM

PTH

153B**AM

PTH

154B**AM

BTU/h5

M Models

M=6,200/

6,000 M = 6,200 8,200/ 8,000 8,200 10,800/

10,600 10,800 13,300/

13,200 13,300

N Models

N=6,400/

6,300 N = 6,200 --- --- --- --- --- ---

Amps¹² 2.6/ 3.0 2.2 3.2/ 3.6 2.6 4.5/ 5.1 3.9 5.7/ 6.3 5.4

Watts¹² 550/ 530 550 750/ 730 750 1,020/ 1,000 1,020 1,340/ 1,330 1,340

COP5

M Models

M= 3.3/ 3.3 M = 3.3 3.2 3.2 3.1 3.1 2.9 2.9

N Models

N= 3.5/ 3.6 N = 3.5 --- --- --- --- --- ---

CFM (Dry) 235/ 230 235 235/ 230 230 310/ 290 310 345/ 335 345

Heating

(BTU/h)5

Outdoor

Ambient

Rating

Point

62 °F 7,200/ 7,000 7,200 9,800/ 9,600 9,800 13,000/

12,800 13,000 15,800/

15,700 15,800

57 °F 6,900/ 6,700 6,900 9,300/ 9,100 9,300 12,300/

12,100 12,300 15,000/

14,900 15,000

52 °F 6,500/ 6,300 6,500 8,700/ 8,500 8,700 11,600/

11,400 11,600 14,200/

14,100 14,200

47 °F 6,200/ 6,000 6,200 8,200/ 8,000 8,200 10,800/

10,600 10,800 13,300/

13,200 13,300

COP* 3.3/ 3.3 3.3 3.2/ 3.2 3.2 3.1/ 3.1 3.1 2.9/ 2.9 2.9

42 °F 5,900/ 5,700 5,900 7,700/ 7,500 7,700 10,100/

9,900 10,100 12,500/

12,400 12,500

37 °F 5,600/ 5,400 5,500 7,200/ 7,000 7,200 9,400/ 9,200 9,400 11,700/

11,600 11,700

32 °F 5,300/ 5,100 5,200 6,700/ 6,500 6,700 8,600/ 8,400 8,600 10,800/

10,700 10,800

27 °F 5,000/ 4,800 5,000 6,200/ 6,000 6,200 7,900/ 7,700 7,900 10,000/

9,900 10,000

24 °F 4,800/ 4,600 4,800 5,900/ 5,700 5,900 7,500/ 7,300 7,500 9,500/ 9,400 9,500

Watts

Outdoor

Ambient

62 °F 580/ 560 580 810/ 790 810 1,120/ 1,100 1,120 1,465/ 1,455 1,465

57 °F 575/ 555 575 800/ 780 800 1,090/ 1,075 1,090 1,440/ 1,430 1,440

52 °F 555/ 535 555 775/ 755 775 1,060/ 1,045 1,060 1,405/ 1,395 1,405

47 °F 550/ 530 550 750/ 730 750 1,020/ 1,005 1,020 1,340/ 1,330 1,340

42 °F 540/ 525 560 730/ 710 730 985/ 970 985 1,325/ 1,315 1,325

37 °F 530/ 515 545 705/ 685 705 950/ 935 950 1,285/ 1,275 1,285

32 °F 515/ 500 535 690/ 670 690 900/ 885 900 1,240/ 1,230 1,240

27 °F 505/ 490 525 660/ 640 660 855/ 840 855 1,190/ 1,180 1,190

24 °F 500/ 485 520 640/ 620 640 830/ 815 830 1,180/ 1,170 1,180

- Denotes M or N models

COP = Coefciency of Performance; per ARI Test Procedures, units are rated for capacities and efciencies.

See Page 6 for Notes and Auxiliary Electric Heater Performance.

Product SPecificationS (cont.)

SS-DPTAC www.amana-ptac.com 8

8 www.amana-ptac.com SS-DPTAC

SPecification SHeet SPecification SHeet

Amana®is a trademark of Maytag Corporation and used under license to Goodman

mean a change in specications without notice.

framing for acceSSory Wall Sleeve (WS900d)

Wall Sleeve Opening Height

Should Be Squared with

Wall Sleeve Opening Width

H = 16¼"

W = 42¼"

Fastening Wall Sleeve

When installed in an opening, the Wall Sleeve must be horizontally level

(side-to-side) and pitched ¼ bubble to the outside. (NOTE: To ensure

unit’s maximum efciency, DO NOT over- or under-pitch.)

Installation Notes

1. If Sub-base (PTSB***E) is installed, allow minimum 3¼” height

clearance and maximum 5” height clearance between wall sleeve

and oor; allow minimum 2¾” protrusion from a nished wall. See

Note 4 if using hydronic units.

2. Drain Kit (DK900D) shipped separately. Can be mounted either right

side, left side or bottom of sleeve. If mounted to bottom of sleeve,

allow 2” height clearance from oor to bottom of sleeve.

3. For UL approval, 265V units must use Amana®brand Sub-base

(PTSB***E) or Amana®brand Hard Wire Kit (PTPWHWK4).

Overcurrent protection on 265V units must be by cartridge-style

time delay fuses, which are included and factory-installed on

the Amana®brand 265V chassis.

4. If Hydronic Kit (HWK03 or HVK03) is installed, Wall Sleeve must

extend exactly 3" into the room from the nished interior wall. If

using the Amana®brand Sub-base (PTSB***E), only the minimum

3¼” height clearance between wall sleeve and oor is permissible.

Unit must also be operated with a remote-mounted thermostat.

5. If Duct Kit (MDK02B) is installed, allow a minimum of 2⅜” into the

room from the nished interior wall.

unit WitH acceSSory Wall Sleeve and

SuB-BaSe acceSSory

Top View

Right View

Wall Sleeve must extend a minimum of ¼” beyond outside wall to allow for

proper caulking.

Front View

58” LCDI CORD SET — 230V/208V UNIT*

This manual suits for next models

Table of contents

Other Amana Air Conditioner manuals

Amana

Amana APUM3 M41AA Series Guide

Amana

Amana DigiSmart PTC models User manual

Amana

Amana R-410A User manual

Amana

Amana AAC051STA User manual

Amana

Amana AE User manual

Amana

Amana First Edition User manual

Amana

Amana AMAP101AB-2 User manual

Amana

Amana Ultra Quiet Zone Room Air Conditioner User manual

Amana

Amana ACB06KE User manual

Amana

Amana High Capacity Room Air Conditioner User manual

Amana

Amana AVH09 Service manual

Amana

Amana AAC101SRA Service Manual

Amana

Amana AAC051FRB User manual

Amana

Amana distinctions DCP073A25AA User manual

Amana

Amana Room Air Conditioner & Heat Pump User manual

Amana

Amana R-410A User manual

Amana

Amana ACE245E User manual

Amana

Amana PBC123B00MB Quick start guide

Amana

Amana ERCF18-UO1B User manual

Amana

Amana MBVC Series Service manual

Amana

Amana AMAP121A User manual

Amana

Amana VTC123A00AA P1233605R User manual

Amana

Amana PTAC 24" Service manual

Amana

Amana APN14J User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual