Allen-Bradley ArmorBlock Series Manual

Wiring Diagrams

ArmorBlock WeldBlock 2-Port Ethernet

Self-configurable with QuickConnect

CatalogNumbers1732E-16CFGM12QCWR,1732E-16CFGM12P5QCWR

Parts List

Your package contains one 1732E ArmorBlock™ WeldBlock module and these

pinout guide wiring instructions.

For complete installation instructions, refer to the Module Publication Number

table and visit http://www.rockwellautomation.com/literature/.

I/O Connectors

Micro-style 5-Pin Selectable Point Connector

Module Publication Number

1732E ArmorBlock 2-Port Ethernet Modules with QuickConnect 1732E-IN010

WARNING: HOT SURFACE. RISK OF BURN.

ATTENTION: Two sets of mounting holes are used to mount the module

directly to a panel or machine. Mounting holes accommodate #8 (M4) pan

head screws. The torque specification is 1.13 Nm (10 lb-in.).

1 2

(View into connector)

Pin 1 Sensor source voltage

Pin 2 Input B or Output B

Pin 3 Return

Pin 4 Input A or Output A

Pin 5 PE

44807

2ArmorBlock WeldBlock 2-Port Ethernet Self-configurable with QuickConnect

Publication 1732E-WD005C-EN-P - May 2013

EtherNet/IP Connector

D-Code Micro Network Female Connector

Auxiliary Power Connector

Mini-style 4-Pin Receptacles

Mini-style 5-Pin Receptacles

TIP

The ground for both module power and output power are shared.

ATTENTION: This equipment is considered Group 1, Class A industrial

equipment according to IEC/CISPR 11. Without appropriate precautions,

there may be difficulties with electromagnetic compatibility in residential

and other environments due to conducted and radiated disturbance.

(View into connector 1)

Pin 1 M12_Tx+

Pin 2 M12_Rx+

Pin 3 M12_Tx-

Pin 4 M12_Rx-

Pin 5 Connector shell

shield GND

45793

(View into connector 2)

Pin 1 M12_Rx+

Pin 2 M12_Tx+

Pin 3 M12_Rx-

Pin 4 M12_Tx-

Pin 5 Connector shell

shield GND

4 2

3 1

44809

(View into receptacle)

Pin 1 Output power+

Pin 2 Sensor/MDL power+

Pin 3 Sensor/MDL power-

Pin 4 Output power-

45677

Male Input Female Output

46199

(View into receptacle)

Pin 1 Output power-

Pin 2 Sensor/MDL power-

Pin 3 Protective Earth

Pin 4 Sensor/MDL power+

Pin 5 Output power+

46200

Male Input Female Output

ArmorBlock WeldBlock 2-Port Ethernet Self-configurable with QuickConnect 3

Publication 1732E-WD005C-EN-P - May 2013

Specifications

Environmental Specifications

Attribute Value

Temperature, operating IEC60068-2-1 (Test Ad, Operating Cold),

IEC60068-2-2, (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20...60 °C (-4…140 °F)

Temperature, ambient, max 60 °C (140 °F)

Voltage, operating 12…30V DC

Output current, per port 0.5 A

Enclosure type rating Meets IP65/66/67/69K (when marked), and Type 4X Indoor

Use Only, with receptacle dust caps or cable termination

Certifications

Certification (when

product is marked)(1)

(1) See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for

Declaration of Conformity, Certificates, and other certification details.

Value

c-UR-us UL Recognized Industrial Control Equipment, certified for US and

Canada. See UL File E322657.

CE European Union 2004/108/EC EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

C-Tick Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

EtherNet/IP ODVA conformance tested to Ethernet/IP specifications.

KC Korean Registration of Broadcasting and Communications

Equipment, compliant with:

Article 58-2 of Radio Waves Act, Clause 3

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using

its products. At http://www.rockwellautomation.com/support/, you can find technical

manuals, a knowledge base of FAQs, technical and application notes, sample code and

links to software service packs, and a MySupport feature that you can customize to

make the best use of these tools.

For an additional level of technical phone support for installation, configuration, and

troubleshooting, we offer TechConnect support programs. For more information,

contact your local distributor or Rockwell Automation representative, or visit

http://www.rockwellautomation.com/support/.

Installation Assistance

If you experience a problem within the first 24 hours of installation, please review the

information that's contained in this manual. You can also contact a special Customer

Support number for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational

when shipped from the manufacturing facility. However, if your product is not

functioning and needs to be returned, follow these procedures.

Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

United States 1.440.646.3434

Monday – Friday, 8 a.m. – 5 p.m. EST

Outside United States Please contact your local Rockwell Automation representative for any

technical support issues.

United States Contact your distributor. You must provide a Customer Support case number

(see phone number above to obtain one) to your distributor in order to

complete the return process.

Outside United States Please contact your local Rockwell Automation representative for the return

procedure.

Publication 1732E-WD005C-EN-P - May 2013 PN-205442

Other manuals for ArmorBlock Series

This manual suits for next models

Other Allen-Bradley Control Unit manuals

Allen-Bradley

Allen-Bradley ControlLogix 1756-OA8D User manual

Allen-Bradley

Allen-Bradley ControlNet-to-FOUNDATION Fieldbus H1 User manual

Allen-Bradley

Allen-Bradley 1757-FFLD User manual

Allen-Bradley

Allen-Bradley OptiSIS 1711-P05SISID050S User manual

Allen-Bradley

Allen-Bradley PowerFlex 755 User manual

Allen-Bradley

Allen-Bradley DeviceNet 1747-SDN/B User manual

Allen-Bradley

Allen-Bradley CENTERLINE 2100 User manual

Allen-Bradley

Allen-Bradley ControlNet 1786-RPFM User manual

Allen-Bradley

Allen-Bradley POINT I/O 1734-VHSC5 User manual

Allen-Bradley

Allen-Bradley 1771-QDC User manual

Allen-Bradley

Allen-Bradley DH485/RS-232C User manual

Allen-Bradley

Allen-Bradley ArmorBlock MaXum B Series User manual

Allen-Bradley

Allen-Bradley Kinetix 5700 User manual

Allen-Bradley

Allen-Bradley Logix5000 Series User manual

Allen-Bradley

Allen-Bradley 1440-DYN02-01RJ User manual

Allen-Bradley

Allen-Bradley 1732ES-IB16 User manual

Allen-Bradley

Allen-Bradley ControlNet 1747-ACN15 User manual

Allen-Bradley

Allen-Bradley DeviceNet 1203-GK5 User manual

Allen-Bradley

Allen-Bradley ProcessLogix B Series User manual

Allen-Bradley

Allen-Bradley MicroLogix 1200 User manual

Allen-Bradley

Allen-Bradley C Series User manual

Allen-Bradley

Allen-Bradley 1492-AIFM16-F-5 User manual

Allen-Bradley

Allen-Bradley 1756-EN2TSC User manual

Allen-Bradley

Allen-Bradley 1771-OBN User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual