Allen-Bradley 1770-KFDG User manual

Packing Data PK

Publication 17705.6 - June 1996

DeviceNet

RS232 Interface Module

(Catalog Number 1770-KFD and 1770-KFDG)

To the Installer

The 1770-KFD module is a portable RS-232 communication interface that

provides a host computer access to a DeviceNet

tnetwork.

This document contains this information:

topic page

purpose and audience 2

precautionary statements 2

handling the module 4

terminology 4

related publications 4

contents of your order 5

introduction to the RS232 module 8

communicating on DeviceNet 9

mounting the module 10

supplying power 12

connecting cables via RS232 to a computer 14

connecting cables via RS232 to a modem 16

connecting cables via DeviceNet 17

installing the 1770KFD driver 22

interpreting status indicators 23

specifications 25

support services 26

New or modified information is highlighted by a revision bar.

Installation Instructions

Allen-Bradley

DeviceNet RS-232 Interface Module2

Publication

17705.6 - June 1996

Purpose

Use

this document to learn how to install and use the DeviceNet RS-232

interface module.

Audience

Read this manual before you install or use the DeviceNet RS-232 interface

module. You should be familiar with DeviceNet technology.

Precautionary Statements

Important

User Information

Because

of the variety of uses for the products described in this publication, those responsible

for the application and use of this control equipment must satisfy themselves that all necessary

steps have been taken to assure that each application and use meets all performance and

safety requirements, including any applicable laws, regulations, codes and standards.

The illustrations, charts, sample programs and layout examples shown in this guide are intended

solely for purposes of example. Since there are many variables and requirements associated with

any particular installation, AllenBradley does not assume responsibility or liability (to include

intellectual property liability) for actual use based upon the examples shown in this publication.

AllenBradley publication SGI1.1,

Safety Guidelines for the Application, Installation, and Maintenance

of Solid State Control

(available from your local AllenBradley office), describes some important

dif

ferences between solidstate equipment and electromechanical devices that should be taken into

consideration when applying products such as those described in this publication.

Reproduction of the contents of this copyrighted publication, in whole or in part, without written

permission of AllenBradley Company

, Inc., is prohibited.

Throughout this document we use notes to make you aware of safety considerations:

Attention statements help you to:

ATTENTION:

This notation identifies information about practices or circumstances

that can lead to personal injury or death, property damage or economic loss.

Important:

This notation identifies information that is critical for successful application and

understanding of the product.

S identify

a hazard

S avoid

the hazard

S recognize

the consequences

DeviceNet RS-232 Interface Module 3

Publication

17705.6 - June 1996

European Union Directive Compliance

This product has the CE mark and is approved for installation within the

European Union and EEA regions. It has been designed and tested to meet the

following directives.

EMC Dir

ective: This apparatus is tested to meet Council Directive 89/336/EEC

Electromagnetic Compatibility (EMC) using a technical construction file and the

following standards, in whole or in part:

•EN 50081-2 EMC – Generic Emission Standard,

Part 2 – Industrial Environment

•EN 50082-2 EMC – Generic Immunity Standard,

Part 2 – Industrial Environment

The product described in this manual is intended for use in an industrial

environment.

Low V

oltage Directive:

This apparatus is also designed to meet Council

Directive 73/23/EEC Low Voltage, by applying the safety requirements of

EN 61131-2 Programmable Controllers, Part 2 – Equipment Requirements

and

Tests.

For specific information that the above norm requires, see the appropriate

sections in this manual, as well as the following Allen-Bradley publications:

•Industrial Automation Wiring and Grounding Guidelines,

publication 1770-4.1

•Guidelines for Handling Lithium Batteries, publication AG-5.4

•

Automation Systems Catalog, publication B1

Allen-Bradley

DeviceNet RS-232 Interface Module4

Publication

17705.6 - June 1996

Handling the Module

ATTENTION:

This RS-232 module uses CMOS technology

, which is highly

sensitive to electrostatic dischar

ge (ESD). ESD may be present whenever you

are handling the module.

ake these precautions to guard against electrostatic damage:

•Avoid touching the interface connector pins on the RS-232 module.

•If the module is not in use, store it in the anti-static bag in which it was

shipped.

It is not necessary to wear an ESD wrist strap while handling the 1770-KFD

module.

Terminology

this term means

DeviceNet an open communication network designed to connect control

systems to plant floor devices, e.g., sensors, push buttons,

motor starters, and drives

DeviceNet is based on commercially available technology and

can be used by any company to develop interoperable

products.

node configuration to configure the node address and data rate before a device is

connected to a DeviceNet network

parameter configuration to configure the operational parameters of a DeviceNet device

pointtopoint configuration a twonode DeviceNet network consisting of a 1770KFD

interface module and a device

Related Publications

title publication number

DeviceNet Manager Software User Manual 17876.5.3

DeviceNet Cable System Planning & Installation Manual DN6.7.1

DeviceNet RS232 Interface Module Communication Protocol

Reference Manual

17706.5.22

DeviceNet RS-232 Interface Module 5

Publication

17705.6 - June 1996

Contents of Your 1770KFD Order

With

this package you should receive:

1770KFD

module

unsealed DeviceNet

terminal connector

DIN rail

mounting brackets

DIN rail

mounting bracket screws

6 ft, 9pin Dshell RS232

nullmodem cable

KFD instructions

1770KFD

driver disk

•one DeviceNet RS-232 interface module, catalog no. 1770-KFD

•one 1770-KFD driver diskette

•two DIN rail mounting brackets

•four DIN rail mounting bracket screws

•one 6 ft, 9-pin D-shell RS-232 null-modem cable

•

one unsealed DeviceNet terminal connector

•one copy of publication 1770-5.6, DeviceNet RS-232 Interface Module

Installation Instructions

If you ordered catalog no. 1770-KFDG, your order also includes a global 9V ac

power supply adapter (90 – 260V ac).

If you are missing any of these pieces, contact your Allen-Bradley

sales representative.

Allen-Bradley

DeviceNet RS-232 Interface Module6

Publication

17705.6 - June 1996

Available

options:

•global 9V ac power supply adapter (90 – 260V ac),

which comes with

catalog no. 1770KFDG/A

•domestic 9V ac power supply adapter (120V ac),

which you can or

der

separately as catalog no. 1787USADPTR/A

Each adapter connects to the power supply connector on the 1770-KFD module.

See page

12 for additional information.

DeviceNet RS-232 Interface Module 7

Publication

17705.6 - June 1996

•an 8 ft, 5-pin DeviceNet unsealed probe cable (catalog no. 1787-PCABL),

which you can or

der separately

Probe cable

•a 6 ft, sealed T-tap DeviceNet connector cable (catalog no. 1787-TCABL),

which you can or

der separately

Ttap cable

This

cable connection lets the 1770-KFD module and a device connected to

the module in a point-to-point configuration draw power from the network.

•a 6 ft, unsealed-to-sealed DeviceNet drop cable (catalog no. 1787-MCABL),

which you can or

der separately

Unsealed drop cable

Each cable connects to the 5-pin unsealed receptacle on the 1770-KFD module.

See cable connection information beginning on page 17.

Allen-Bradley

DeviceNet RS-232 Interface Module8

Publication

17705.6 - June 1996

Introducing the 1770KFD Interface Module

The 1770-KFD module, described in Figure 1, is a portable RS-232

communication interface that provides a host computer access to a

DeviceNet network.

host

computer

1770KFD

module

RS232 cable

RS232 serial port

Figure 1

1770KFD

module

9pin Dshell

RS232 connector

5pin unsealed

connector

power

switch

power supply

connector

Network Status

indicator

Module Status

indicator

RS232 Status

indicator

20294

wiring

connection

diagram

Side 1

Side 2

DeviceNet RS-232 Interface Module 9

Publication

17705.6 - June 1996

Communicating on DeviceNet

The 1770-KFD module lets you communicate:

•point-to-point (host computer directly to device via the 1770-KFD module)

The host computer uses a point-to-point connection for node and/or

parameter configuration.

device

host

computer

1770KFD

module

DeviceNet cable RS232 cable

power supply

•via

a DeviceNet network connection

host

computer

1770KFD

module

DeviceNet network

RS232 cable

devices

1771SDN scanner 1747SDN scanner

Allen-Bradley

DeviceNet RS-232 Interface Module10

Publication

17705.6 - June 1996

The 1770-KFD module performs data transmission, management, and local

network diagnostics.

Allen-Bradley DeviceNet Manager software, 1787-MGR, manages data

transmission and reception through the 1770-KFD interface module from a

personal computer (Windowstoperating system).

Mounting the 1770KFD Module

You can mount the module on a DIN rail.

1. Use the four screws to attach the two mounting brackets to the back of the

module.

20296

This manual suits for next models

Table of contents

Other Allen-Bradley Control Unit manuals

Allen-Bradley

Allen-Bradley C Series User manual

Allen-Bradley

Allen-Bradley 1771-QRD User manual

Allen-Bradley

Allen-Bradley 1756-L7 Series User manual

Allen-Bradley

Allen-Bradley 1756 Series User manual

Allen-Bradley

Allen-Bradley 1756 Series User manual

Allen-Bradley

Allen-Bradley 1794-IA8 User manual

Allen-Bradley

Allen-Bradley ControlLogix 1756-DH485 User manual

Allen-Bradley

Allen-Bradley Micro800 2080-MEMBAK-RTC2 User manual

Allen-Bradley

Allen-Bradley POINT I/O 1734-PDN User manual

Allen-Bradley

Allen-Bradley MicroLogix 1500 1764-MM1 User manual

Allen-Bradley

Allen-Bradley FLEX I/O 1794-ID2 User manual

Allen-Bradley

Allen-Bradley ControlNet 1786-RPCD User manual

Allen-Bradley

Allen-Bradley ArmorBlock Series Manual

Allen-Bradley

Allen-Bradley 1203-GD1 Parts list manual

Allen-Bradley

Allen-Bradley ArmorBlock 1732E User manual

Allen-Bradley

Allen-Bradley 1771-OG User manual

Allen-Bradley

Allen-Bradley ControlNet 1786-RPFM User manual

Allen-Bradley

Allen-Bradley 1756 ControlLogix User manual

Allen-Bradley

Allen-Bradley POINT I/O 1734-OB2 User manual

Allen-Bradley

Allen-Bradley 1771-QDC User manual

Allen-Bradley

Allen-Bradley Rockwell Automation 1734-4IOL User manual

Allen-Bradley

Allen-Bradley PowerFlex 755 User manual

Allen-Bradley

Allen-Bradley 1762-OF4 User manual

Allen-Bradley

Allen-Bradley 2711P-RDT12H User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual