Allen-Bradley ArmorBlock Series Manual

Wiring Diagrams

ArmorBlock Dual-Port EtherNet/IP 8-Point

Digital Modules

Catalog Numbers 1732E-IB8M8SOER, 1732E-OB8M8SR, 1732E-8CFGM8R

Parts List

Your package contains one 1732E ArmorBlock™ module and these pinout guide

wiring instructions.

For complete installation instructions, refer to the Module Publication Number

table and visit http://literature.rockwellautomation.com.

Module Publication Number

1732E ArmorBlock Dual Port EtherNet/IP Digital Modules Installation

Instructions

1732E-IN007

ATTENTION: Two sets of mounting holes are used to mount the module

directly to a panel or machine. Mounting holes accommodate #6 (M3) pan

head screws. The torque specification is 0.68 Nm (6 lb-in.).

ATTENTION: To comply with the CE Low Voltage Directive (LVD), this

equipment and all connected I/O must be powered from a source compliant

with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

ATTENTION: To comply with UL restrictions, this equipment must be powered

from a source compliant with the following: Limited Voltage.

ATTENTION: The device meets UL Type 1 Enclosure rating.

2ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules

Publication 1732E-WD002C-EN-P - March 2014

I/O Connectors

EtherNet/IP Connector

D-Code M12 Micro Network Female Connector

ATTENTION: Sensors/actuators power should not be supplied externally.

IMPORTANT

Use the 1585D–M4DC–H: Polyamide small body unshielded mating

connectors for the D-Code M12 female network connector.

Note that the distance between the center of each Ethernet connector is

16.2 mm. Rockwell Automation recommends the use of suitable cable

based on this measurement. Some of the recommended cables are

1585D-M4TBJM-x and 1585D-M4TBDM-x for daisychains.

ATTENTION: Make sure all connectors and caps are securely tightened to

properly seal the connections against leaks and maintain IP enclosure type

requirements.

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input

45383

Pico-style 3-Pin Input Female Connector

45383

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Output

Pico-style 3-Pin Output Female Connector

Pico-style 3-Pin Self-configuring Female Connector

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input or Output

45383

(View into connector)

Pin 1 Tx+

Pin 2 Rx+

Pin 3 Tx-

Pin 4 Rx-

Pin 5 Shell

44808

ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules 3

Publication 1732E-WD002C-EN-P - March 2014

Power Connectors

Micro-style 4-Pin Input Male Receptacle

Specifications

IMPORTANT

Use two twisted pair CAT5E UTP or STP cables.

IMPORTANT

The maximum current that any pin on the power connectors can

carry is 4 A.

Environmental Specifications

Attribute Value

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20…60 °C (-4…140 °F)

Temperature, ambient, max 60 °C (140 °F)

Voltage, power, max 30V DC

Voltage, power, min 12V DC

Output current 0.5A per output, up to 4A per module

D-Code

M12 Pin

Wire Color Signal 8-way Modular

RJ45 Pin

1 White-orange TX+ 1

2 White-green RX+ 3

3 Orange TX- 2

4 Green RX- 6

45764

(View into receptacle)

Pin 1 Auxiliary power+

Pin 2 Module power+

Pin 3 Module power-

Pin 4 Auxiliary power-

45763

Male Input Female Output

Publication 1732E-WD002C-EN-P - March 2014 PN-245397

Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Pilot Duty Rating DC-14

Enclosure type rating Meets IP65/66/67/69K

ATTENTION: This equipment is considered Group 1, Class A industrial equipment

according to IEC/CISPR 11. Without appropriate precautions, there may be difficulties

with electromagnetic compatibility in residential and other environments due to

conducted and radiated disturbance.

Certifications

Certification (when

product is marked)(1)

(1) See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for

Declarations of Conformity, Certificates, and other certification details.

Value

c-UR-us UL Recognized Component Industrial Control Equipment, certified for US

and Canada. See UL File E322657.

CE European Union 2004/108/EC EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

C-Tick Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

EtherNet/IP ODVA conformance tested to Ethernet/IP specifications.

KC Korean Registration of Broadcasting and Communications Equipment,

compliant with:

Article 58-2 of Radio Waves Act, Clause 3

Environmental Specifications

Attribute Value

Other manuals for ArmorBlock Series

This manual suits for next models

Table of contents

Other Allen-Bradley Control Unit manuals

Allen-Bradley

Allen-Bradley 1769-OF8C User manual

Allen-Bradley

Allen-Bradley 1718 Ex I/O User manual

Allen-Bradley

Allen-Bradley DeviceNet 1747-SDN User manual

Allen-Bradley

Allen-Bradley 1791-16BC User manual

Allen-Bradley

Allen-Bradley ControlLogix 1756-ENET/B User manual

Allen-Bradley

Allen-Bradley POINT I/O 1734-OB2 User manual

Allen-Bradley

Allen-Bradley 1785-KE User manual

Allen-Bradley

Allen-Bradley 1336 PLUS II User manual

Allen-Bradley

Allen-Bradley ControlLogix 1756-ENET/B User manual

Allen-Bradley

Allen-Bradley ControlLogix 1756-ENBT User manual

Allen-Bradley

Allen-Bradley Rockwell Automation 1734-4IOL User manual

Allen-Bradley

Allen-Bradley Logix5000 Series User manual

Allen-Bradley

Allen-Bradley ControlLogix 1756-DMD30 User manual

Allen-Bradley

Allen-Bradley ArmorPoint A Series User manual

Allen-Bradley

Allen-Bradley 1756 Series User manual

Allen-Bradley

Allen-Bradley CENTERLINE 1500 User manual

Allen-Bradley

Allen-Bradley POINT I/O PROFIBUS 1734-APB User manual

Allen-Bradley

Allen-Bradley Bulletin 1203 Series User manual

Allen-Bradley

Allen-Bradley ControlNet 1786-RPFM User manual

Allen-Bradley

Allen-Bradley ArmorBlock 1732E Operation manual

Allen-Bradley

Allen-Bradley Bulletin 193 E1 PLUS User guide

Allen-Bradley

Allen-Bradley ArmorBlock 1792 User manual

Allen-Bradley

Allen-Bradley POINT I/O 1734-ADN User manual

Allen-Bradley

Allen-Bradley ControlLogix 1756-OB16D User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual