All Pro Solutions Zeus Series User manual
Standalone, fully automated
CD/DVD Printer Autoloader
User Manual
5542 Brisa Street, Suite F •Livermore, CA 94550
Tel: 925-447-8484 •Fax: 925-447-8811 •www.all-pro-sol.com
3
COPYRIGHT_____________________________________________________________________
Copyright © 2000–2008 All Pro Solutions, Inc
All Rights Reserved. This manual and the software described in it are copyrighted with all rights
reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system or translated into any language in any form by any means without the written
permission of All Pro Solutions, Inc.
PRIVACY / ILLEGAL COPYING ____________________________________________________
The ZEUS Series copiers are designed to help you easily reproduce material for which you own the
copyright or have obtained permission from the copyright owner to make copies. Unless you own
the copyright or have permission from the copyright owner to make copies, you may be violating
copyright law and be subject to payment of fines, damages and/or other remedies. All Pro Solutions
Inc. accepts no responsibility for the use or misuse of this equipment for illegal purposes. If you are
uncertain about your rights, contact your legal advisor.
WARRANTY____________________________________________________________________
All Pro Solutions, Inc (hereinafter “All Pro Solutions”) warrants its products to be free from defects in
materials and workmanship under normal and proper usage for the period stated in your Warranty
Card.
All Pro Solutions shall not be liable for direct, indirect, special, incidental or consequential
damages arising from the use or inability to use this product or documentation. In particular, All Pro
Solutions shall not have liability for any hardware used with this product, including the costs of
repairing, replacing or recovering such hardware.
DAMAGE_______________________________________________________________________
This shipment was packaged and delivered to the carrier with the utmost care to ensure safe
delivery of goods. If your ZEUS system is damaged during shipment, please contact the freight
carrier first, then contact your distributor or All Pro Solutions
INCOMPLETE ORDERS___________________________________________________________
Check the shipment against the shipping papers thoroughly and immediately to ensure receivership
of a full shipment. Do not discard packing materials or cases. Check out all possibilities before
reporting a shortage or incomplete order.
SAVE PACKAGING_______________________________________________________________
You have to save your packaging materials so that if the need arises you can return your system for
service. Sending a system to All Pro Solutions without the original packaging will void the warranty.
This packaging was designed specifically for shipping your system. Other packaging may not be as
suitable.
IF YOUR SYSTEM REQUIRES SUPPORT____________________________________________
If your system requires servicing, you should first contact the place of purchase and request support
or contact All Pro Solutions as follows:
Phone: (925) 447-8484
Before shipping any item to All Pro Solutions, first obtain a RMA (Return Material Authorization)
Number from All Pro Solutions support. This number must be placed on the outside of the product
packaging where it can be easily found; otherwise the item will be refused and returned at the
sender’s expense
Table Of Contents
Quick Start ......................................................................................................................... 1
Getting Started ………………………………………………………………………………..1
Manufacturer Recommendations
……………………………………………………………..2
Mounting the
Printer……………………………………………………………………...…...2
Operating Environment ........................................................................................................... 3
Connecting Power
……………………………………………………………………………..3
Printer Alignment
……………………………………………………………………………10
Overview ……………..………………………………………………………………….11
Temperature Warning ………………………………………………………………………11
Disc Static and Sticky Media
………………………………………………………………..11
Disc Placement
……………………………………………………………………………….12
The Robotic Platform
………………………………………………………………………..12
The LCD Control Panel ……………………………………………………………………..13
Operation ………………………………………………………………………………..14
Installing Software
…………………………………………...………………………………14
Print Only Mode
……………………………………………………………………………..15
Zeus Series / Standalone DVD Printer Autoloader / User Manual
1
Quick Start
Quick StartQuick Start
Quick Start
Getting started
The removal of this product should be undertaken by at least 2 people because of its
size and weight. Please ensure safe manual handling procedures are followed
Carefully remove your system from it’s shipping box and verify that all parts are present.
If there are missing or damaged parts contact All Pro Solutions (APS) or an authorized
distributor immediately to correct any miss-packed or missing parts.
You should find the following packaged with your system:
Autoloader AU4 (up to 330 disc capacity), AU7 (up to 630 disc capacity) or AU9 (up
to 900 disc capacity), depends on your model configuration
Rimage, Teac, SpeedJet or Pro III printer
Two Power cords (1 for autoloader and 1 for printer)
Printer Parallel Cable
Printer Control Cable (not included with the Rimage Prism Plus printer)
USB Cable
PublisherNET Software (to be installed on the Server PC only)
Pro.Net Client Software (to be installed either on the Server PC or on to many client
PCs to allow multiple users to access the Autoloader across your network)
User Manual
5/64 hex head key (Allen wrench) and a bottle with oil to maintain shafts functionality
Warranty card
NOTE:
If your system is damaged during shipment, please contact the freight carrier first, and then
contact your distributor or All Pro Solutions.
You have to save your shipping materials so that if the need arises you can return your
system for service. Sending a system to All Pro Solutions without the original packaging
will void the warranty. This packaging was designed specifically for shipping your system.
Other packaging may not be as suitable. If you have already disposed of your packaging
materials, you can receive a new set from All Pro Solutions for a fee.
Zeus Series / Standalone DVD Printer Autoloader / User Manual
2
Manufacturer Recommendations
Before starting to operate your system, please read the User’s Manual entirely!
Place your system on a flat, steady surface in a climate controlled environment with
regular office light (no bright light to reflect into the system’s sensor), free of dirt, dust,
excess humidity, excessive heat or electro-magnetic interference.
Please fan the media before placing it into the Input Hopper and align it. Media has to
slide easy on top of each other
Do not use un-expensive media because it can generate problems: media sticks together
and 2 or more discs can be loaded even if the picker it’s designed to grab just one.
From time to time, the drives have to be cleaned using a CD Lens cleaning Kit or blowing
air using a compressed gas duster.
The 2 shafts used by the Picker to travel up and down should be oiled from time to time; use
the multipurpose oil provided
Mounting the Printer
This autoloader can be used with Rimage, SpeedJet, Teac, or Pro III printer and uses the
same mounting system for either one of them.
Place your printer (with its own plate mounted on the bottom) on top of your tower. Do
not tighten the screws until the printer alignment is made. Proceed with “Connecting
Power” and “Printer Alignment” (see page 21).
When alignment is OK, please tighten in the same time, front left and front right
thumbscrews # 3. Repeat this operation for rear left and rear right thumbscrews # 3.
Fig. 1
System unassembled – AU4 autoloader and printer
Zeus Series / Standalone DVD Printer Autoloader / User Manual
3
Operating Environment
Your APS System should be used in a climate-controlled environment free of dirt, dust,
excess humidity, excessive heat or electro-magnetic interference. Your APS System
should be placed on a sturdy level surface – away from sources of vibration and excessive
lighting.
Allow at least four (4) inches of clearance around the sides and back of the system for
ventilation.
Connecting power
Plug one power cable into the autoloader and another one into the printer. Plug each power
cable into the proper power source and connect all the other cables as shown in:
- Fig. 2d for system configured with Rimage Prism Plus printer (page 4)
- Fig. 3d for system configured with Pro III printer (page 6)
- Fig. 4d for system configured with SpeedJet printer (page 7)
- Fig. 5d for system configured with Teac P55 printer (page 8)
Before powering on your system, please ensure the picker (see fig.1, page 2) is in the top position.
Please power on your APS system in the following order:
1. autoloader
2. printer – it usually turns on automatically when you turn on the autoloader – if not,
please turn it on
When the APS system is turned on it performs a series of self-tests and displays several
status messages and finally the Home Menu. Once the Home Menu is displayed, your APS
system is ready for use. Proceed with Drive and Printer Alignment on page 14.
Fig. 2a
System configured with Rimage Prism Plus printer
(a) AU4 autoloader – 330 disc capacity (b) AU7 autoloader – 630 disc capacity
Zeus Series / Standalone DVD Printer Autoloader / User Manual
4
(c) AU9 autoloader – 900 disc capacity
(d) Back-view Cables
Zeus Series / Standalone DVD Printer Autoloader / User Manual
5
Fig. 2
System configured with Pro III printer
(a) AU4 autoloader – 330 disc capacity (b) AU7 autoloader – 630 disc capacity
Zeus Series / Standalone DVD Printer Autoloader / User Manual
6
(c) AU9 autoloader – 900 disc capacity
(d) Back-view Cables
Zeus Series / Standalone DVD Printer Autoloader / User Manual
7
Fig. 3
System configured with SpeedJet printer
(a) AU4 autoloader – 220 disc capacity (b) AU7 autoloader – 420 disc capacity
(c) AU9 autoloader – 900 disc capacity
Other manuals for Zeus Series
1
Table of contents
Other All Pro Solutions Disc Duplicator manuals
Popular Disc Duplicator manuals by other brands
Kanguru
Kanguru U2-DVDDUPE-S user guide
StarTech.com
StarTech.com 8STSATDUP11 manual
DUPLO SEIKO CORPORATION
DUPLO SEIKO CORPORATION Duprinter DP-460 Service manual
Addonics Technologies
Addonics Technologies UDFH7 user guide
Vinpower Digital
Vinpower Digital MiniLoader VDX-1 user manual
Addonics Technologies
Addonics Technologies CFASTD5 user guide