Airwell 18 User manual

OPERATING MANUAL

DC INVERTER

HAD/JAD/DHA Wall Mounted Range

Before using your air-conditioner, please

read this operating instruction carefully

and keep it for future reference.

R410A

Thank you for

purchasing our

Room Air Conditioner.

CONTENT

FEATURES AND FUNCTIONS ........1

PRECAUTIONS................................2

NAME OF EACH PART....................3-5

OPERATION TIPS............................6

PROTECTION MODES....................7

CARE AND MAINTENANCE............8

TROUBLESHOOTING .....................9

EXCEPTION FOR MULTI

SPLIT TYPE .....................................10

ENGLISH

Part No. 4681000420/01

OM HAD/JAD/DHA 2-N.1 GB

Model 18/21/24

INVERTER

VERTICAL AIR SWING

HORIZONTAL AIR SWING

AUTO CHANGE OVER

SLEEP TIME

At the start of operation, a large power is

used to bring the room quickly to the desired

temperature. Afterwards, the unit automatically

switchs to a low power setting for economic and

comfortable operation.

Automatic swing of horizontal louver is in vertical

direction. The louver moves automatically in

upward and downward direction to spread the

conditioned air evenly throughout the room.

Automatic swing of vertical louver is in horizontal

direction. The louver move automatically in right

and left direction to spread the conditioned air

evenly throughout the room.

The operation mode (cooling, dry, heating)

is switched automatically to maintain the set

temperature, and the set temperature is kept

constant at all times.

The Wireless Remote Control Unit allows

convenient control of air conditioner operation.

When the SLEEP button is pressed during

Heating mode, the air conditioner thermostat

setting is gradually lowered during the period of

operation; during cooling mode, the thermostat

setting is gradually raised during the period of

operation, when the set time is reached, the unit

automatically turns off.

BIPOLAR IONIZER makes the air more fresh

and more comfortable, and let you enjoy healthy

life easily.

1.The bipolar ionizer contains an integrated

cleaning and ON/OFF function. The operation is

done by movement of the cleaning pad(see the

sketch below) from left to right and back.

2.There is a flashing diagnostic indicator(LED)

to assure the ion ouput functionality. In case that

the LED is not ashing, the Cleaning Pad has to

be moved once to the right and back to the left

end position for cleaning. The cleaning should

be done in one of the following:

a. The LED stops ashing(check that the

cleaning pad is on the left which is close to

the LED position).

b. At the maintencance of your equipment.

3. Movement of the cleaning pad from left side

to right will switch the bipolar ionizer OFF

Important Notice: When the air-conditioner is

turned OFF or if the indoor fan stops operation,

the IONIZER stops automatically.

Indoor Outdoor

Cooling

Heating

Upper Limit

Lower Limit

Upper Limit

Lower Limit

32 23 46 NA

21 15 -10 NA

27 NA 24 18

10 NA -15 -16

BIPOLAR IONIZER(Option)

Cleaning Pad

Diagnostic indicator (LED)

Bipolar ionizer sketch

DB[°C]

WB[°C]

DB[°C]

WB[°C]

Do not attempt to install this air conditioner by

yourself.

This unit contains no user-serviceable parts.

Always consult authorized service personnel

for repairs.

When moving, consult authorized service

personnel for disconnection and installation of

the unit.

Do not become excessively chilled by staying

for lengthy periods in the direct cooling airow.

Do not insert ngers or objects into the outlet

port or intake grilles.

Do not start and stop air conditioner operation

by disconnecting the power supply cord and

so on.

Take care not to damage the power supply

cord.

In the event of a malfunction (burning smell,

etc.), immediately stop operation, disconnect

the power supply plug, and consult authorized

service personnel.

If the power supply cord of this appliance is

damaged, it should only be replaced by the

authorized service personal, since special

purpose tools and specied cord are required.

Provide occasional ventilation during use,

Do not direct air ow at replaces or heating

apparatus.

Do not climb on, or place objects on, the air

conditioner.

Do not hang objects form the indoor unit.

Do not set ower vases or water containers on

top of air conditioners.

Do not expose the air conditioner directly to

water.

Do not pull power supply cord.

Turn off power source when not using the unit

for extended periods.

Check the condition of the installation stand

for damage.

Do not place animals or plants in the direct

path of the air ow.

Do not drink the water drained from the air

conditioner.

Do not use in applications involving the

storage of foods, plants or animals, precision

equipment, or art works.

Connection valves become hot during

Heating; handle with care.

Do not apply any heavy pressure to radiator

ns.

Operate only with air lters installed.

Do not block or cover the intake grille and

outlet port.

Ensure that any electronic equipment is at

least one metre away from either the indoor or

outdoor units.

Avoid installing the air conditioner near a

replace or other heating apparatus.

When installing the indoor and outdoor unit,

take precautions to prevent access to infants.

Do not use inflammable gases near the air

conditioner.

Part names and function

ABipolar ionizer LED

There is a flashing LED to assure

the ion output functionality.

In case that the LED is not flashing,

the cleaning pad has to be moved

once to another side and back to

the original position (close to the LED)

for cleaning.

B Bipolar ionizer cleaning pad

The cleaning pad not only have the

cleaning function, but also it can switch

the ionizer ON/OFF.

Position 1(Close to LED): ON

Position 2(Far away from LED): OFF

CStandby indicator

This indicator will light up when the unit

is on Standby. It will turn off when unit is

in operation.

DBipolar ionizer indicator

The indicator will light up when Bi-Polar

ionizer is activated via remote control. It

will light up for about 15 seconds before

goes off. (only applicable to units fitted

with Bi-Polar Ionizer)

ETimer indicator

The indicator will light up when Timer

or Sleep operation is activated. During

this mode, upon receiving any signal

from Remote Control (RC), the light

will come up strong and deemed after

about 15 seconds.

F Filter indicator

If the indicator light up (for about 30

seconds after display is going off), it

means that filter should be cleaned.

The indicator will light up again every

time a signal is received from RC, until

it is reset. To reset the filter indicator,

press the reset button (J) and release

Air intake grill

Air lter

Air purifying lter

Horizontal Louver

Vertical Louver

Bipolar Ionizer (option)

On unit operation (Button/indicator)

Unit`s indicatiors

Power cord (optional)

Infra-Red (IR) receiver

Receive signal from the Remote Controller(RC).

MODE/RESET Button

This is a multi-function button.

RESET Button

When Filter indicator is on, press to turn off

the filter indicator and reset the filter counter.

When Filter indicator is off, press to cancel

the buzzer announcer.

MODE BUTTON

This button can be turned on for cooling

or heating, or turned off without remote

controller. every short pressing, the next

operation mode is selected, in this order:Cool

Mode→Heat Mode→standby→. If button is

pressed long, the system enters diagnostic

mode.

Cooling indicator

Lights up only when MODE Button(N) is

pressed in cooling status.

Heating indicator

Lights up only when MODE Button(N) is

pressed in heating status.

Mode Function:

As long as the lter indicator is off, this button

functions as MODE Button. This button

can be turned on for cooling or heating,

or turn off without remote controller. Every

short pressing, the next operation mode is

selected, in this order: Cool Mode → Heat

Mode → Standby → .

If buttom is pressed long, the system enters

diagnostic mode.

Reset Function:

When Filter indicator is on, the button

functions as RESET Button. Short pressing

and release quickly, turns off the lter

indicator and reset the lter counter.

quickly. The indicator will light up for about 2

seconds and off, indicating the filter indicator

had been reset.

Temperature indicator

This indicator indicate the set point

temperature (SPT). During operation mode,

upon receiving any signal from Remote

Control (RC), the SPT will be displayed for

15 seconds before it goes off.

COOL indicator

The indicator will light up if the operation

mode is set to "COOL", "DRY" or "AUTO".

After around 15 seconds, the indicator will

be deemed. Upon receiving any signal

from Remote Controller (RC), the light will

come up strong and deemed after about 15

seconds.

IHEAT indicator

The indicator will light up if the operation

mode is set to "HEAT". After around 15

seconds, the icon will be deemed. Upon

receiving any signal from Remote Controller

(RC), the light will come up strong and

deemed after about 15 seconds.

J Fan Speed indicator

The indoor fan speed set by user will be

indicated as below:

a) Low

b) Medium

c) High

d) Strong

e) Auto

peration, the unit may perform outdoor coil

High outdoor

temperature.

HOW TO CLEAN THE FLAT PANEL

The at panel must be cleaned by soft cloth with water or

mild cleanser. Avoid using abrasive or corrosive cleaner.

Never apply any chemical for cleaning.

HOW TO REMOVE THE PANEL

Open the front panel and push it to the right, then pull out

the right crank, and then pull the front panel to the left and

take it out from the front frame.

CLEANING THE FILTER

Your air conditioner is provided with a lter cleaning

indicator. When the indicator lights up, the lters should

be removed for cleaning.

To remove the air lters, lift up the panel, push the air

lters up slightly to unlock them. Pull out the lters,

clean the lter by washing in warm soapy water and dry

thoroughly, align and t the lters in place, close the panel

by pushing it in the center to lock it in place.

RESET button to turn off indicator.

DO NOT OPERATE THE UNIT WITHOUT FILTERS!

Protect the indoor unit from direct sun or lighting.

This manual suits for next models

Table of contents

Other Airwell Air Conditioner manuals

Airwell

Airwell DLS series User manual

Airwell

Airwell DFMD-100N-01M25 User manual

Airwell

Airwell WNG9 User manual

Airwell

Airwell FLO 24 series User manual

Airwell

Airwell DC Inverter XLLDCI30RC User manual

Airwell

Airwell AWSI-CBV005-N11 User manual

Airwell

Airwell XDA User manual

Airwell

Airwell KXL 24 User manual

Airwell

Airwell AW-HDL007-N91 User manual

Airwell

Airwell HAF Series User manual

Airwell

Airwell ODU VRF VVEA Series User manual

Airwell

Airwell PNV007 User manual

Airwell

Airwell DLF 25 DCI User manual

Airwell

Airwell CD35 Manual

Airwell

Airwell DNC 955 User manual

Airwell

Airwell HKD User manual

Airwell

Airwell AW-FWDB018-N91 User manual

Airwell

Airwell HDL User manual

Airwell

Airwell ECF 9 A RC User manual

Airwell

Airwell YAV112 User manual

Airwell

Airwell SBF User manual

Airwell

Airwell HDLS-025N-01M25 Guide

Airwell

Airwell AWSI-FWD012-N11 User manual

Airwell

Airwell AWSI-HHF009-N11 Operating manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual