AGPtek BTS141 User manual
BTS141 User Manual
EN 01/14
DE 15/29
1
Thank you for purchasing AGPTEK product. Please read
this [User Manual] carefully before using the product,
retain it in for future use.
Note:
To find out how to use S2 or if you have a problem,
please refer to User Manual.
This [User Manual] can help you understand how to use
and troubleshoot the problem.
For better use this product, please connect the speaker
to computer with USB 2.0/3.0 port or a 5V/1A charger
(not quick charger) by the included USB cable. Usually,
it will be fully charged in 3hours.
Register AGPTEK Forum
Please visit www.agptek.com/forum and register
AGPTEK official forum to get better customer support.
Manufacturer: Betrue Technology Company Limited.
Address: D07, 5/F, King Yip Factory Building, 59 King Yip
Street, Kwun Tong, Kowloon, Hong Kong.
E-mail: support@agptek.com.
2
A. Buttons & Controls
1
MIC Hole (For Hand-Free)
2M
MButton (Cycle Time/Bluetooth/FM
/TF mode)
3
Volume down
4
Volume up
5/
Power On/Off, Pick up/Ignore/Hang
up/Last dialed call
⓬
❶
❷
❻
❺
❽
❸
❼
❹
❿
⓫
❾
3
6
Previous track
7
Play, Pause
8
Next track
9
TF card slot
10
Micro USB socket(Under Rubber Seal
Cover)
11
Reset hole(Under Rubber Seal Cover)
12
Vacuum Cupule
B.LED Digital Screen
→→→
❶❷❸❹
After booting up this product, this speaker will display
the Time Calibration Interface ❶firstly. Press M
button to cycle through different interface, such as
Bluetooth Mode❷, FM Function❸, TF Card
Mode❹(Available when TF card is inserted).
C. Time Calibration
1. In power on mode, press the “M” to switch to clock
4
mode if it is in other mode.
2. Press and hold the “M” to go to hour set, the
number of hour will blink on LED display.
3. Press the “ ” or “ ” button for adjusting the
hour time as current time.
4. Short press the “ ” button to confirm the hour
time set and go for Minute set. The number of
minute will blink on LED display.
5. Press the “ ” or “ ” button for adjusting the
minute time as current time.
6. Short press the “ ” button to confirm the minute
time set.
Note:
(1) For maintain the battery life and performance, if
speaker isn't used for a while, the battery might
need to be recharged. Charge the battery at least
once every month.
(2) Connect the Micro USB socket with the PC's USB
port Power or DC 5V, 1000mA through USB cable.
5
(3) Disconnect the USB cable when it is done.
D. Playing Music Via Bluetooth
Power on and Pairing
1. Press and hold button to turn on the device. A
series of tones will sound. If it is in clock mode, press
button Mto switch to Bluetooth mode, the icon
is blinking quickly.
2. Then turn on your device’s Bluetooth, the device will
enter to Bluetooth searching mode automatically, if
not, please search manually, then tap the related
selection to manually enter to searching mode.
(Refer to the user manual when necessary).
3. Your device show "AGPTEK S2" to select it for
Note: Please tighten the Rubber
Seal Cover after charging to
prevent water from penetrating
into the speaker.
6
pairing. Waiting for some seconds, you will see
connected message as shown on your device. (For
some Bluetooth devices, you may need to input
"0000" as pairing password).
4. If pairing is successful, the icon will constantly
show on the display. Then you can start to play
music by the device.
5. Press and hold to turn off the device when it is
not in use.
Disconnect from paired device
1. Press and hold to switch to new
"Searching/Pairing" mode, the paired device will be
disconnected. Or, you can choose "Disconnect" from
Bluetooth paired device list on your mobile device.
In this case; the Bluetooth Speaker will turn back
into "Searching/Pairing" mode in seconds, a series
of tones will sound and the is blinking fast.
2. Now, you can process for new mobile device pair or
power off the Bluetooth Speaker. Note: If Bluetooth
is not connected for more than 8 minutes, this
device will shut down automatically.
Auto re-connect with paired device and New
pairing
7
1. Every time you turn on the speaker and enter into
Bluetooth mode; it will firstly searching for the
mobile device, which has been paired previously
and still in record. The Speaker will re-connect this
mobile device as priority if it is in Bluetooth
searching device mode.
2. If not found in some seconds, the Bluetooth Speaker
then is turn into new pairing mode internally.
3. Now you can process for new mobile device pair.
(Refer to “Power on and Pairing”)
After Bluetooth Paring
After Bluetooth pairing, the speaker can be operated by
the following buttons while playing music.
press
to pause/resume the music
Press
increase the volume level
Press
decrease the volume level
Press
go to next music
Press
go to previous music
Note: When maximum or minimum volume is reached,
a series of tones will sound.
E. Call Function
8
About how to use Hand free Function
When there is an incoming call during Bluetooth music
playing mode;
The ringing sound will up and the playing music will
pause automatically.
Press /
pick up the call if you want
Press /
again
hang up the call when finished.
And the paused music will start to
play automatically
Press and hold
button /
for 3 seconds
ignore the incoming call
Tip: speak to the MIC hole directly with distance in
30~60cm to get the best speakerphone performance
when necessary.
Redial for last call Function
To redial for last called number by the Speaker, even it
is in music playing mode.
Press the
/ for
twice
enter into redial function, the
playing music will pause and
switch to hand free function for
redial.
9
Press the
/ again
hang up the redial call
Note: Make sure that your mobile phone has have last
dial call used, if not, the redial for last call function
cannot be activated.
F. FM Function
Auto Tune Radio Frequency:
In Bluetooth mode, press button M to enter into FM
mode.
Press and hold button to enter into auto searching
mode.
(1) The FM radio will search up the frequency from 87.5
MHz to 108.0MHz and will save the searched
stations automatically.
(2) When finished searching, it will play from the firstly
searched station automatically. You can select radio
station P01-P40 through the “ ” or “ ” button,
and press the “ ” button again to confirm.
FM playing control:
To switch back to Bluetooth mode, press twice button
M.
Press button
to pause/resume the music
Table of contents
Languages:
Other AGPtek Speakers manuals
