Agilent Technologies OmnoBER 725 User manual
Quick Start Guide
Printed in U.K. 11/00
J1409-90001
In This Book
This guide tells you about the front panel
key functions, the indicators and the
connectors.
Agilent Technologies Limited
Telecommunications Networks Test Division
South Queensferry
West Lothian, Scotland EH30 9TG
Copyright 2000 Agilent
Technologies Limited
All rights reserved.
Reproduction, adaption, or
translation without prior
written permission is
prohibited, except as
allowed under the
copyright laws.
Agilent Part No.
J1409-90001
Printed in U.K. 11/00
Documentation
Warranty
The information contained
in this document is subject
to change without notice.
Agilent Technologies
makes no warranty of any
kind with regard to this
material, including, but
not limited to, the implied
warranties or
merchantabilityandfitness
for a particular purpose.
Agilent Technologies shall
not be liable for errors
contained herein or for
incidental or consequential
damages in connection
with the furnishing,
performance, or use of this
material.
WARNING
Warning Symbols Used on
the Product
The product is marked
with this symbol when the
user should refer to the
instruction manual in order
to protect the apparatus
against damage.
The product is marked
with this symbol to
indicate that hazardous
voltages are present
The product is marked
with this symbol to
indicate that a laser is
fitted. The user should
refer to the laser safety
information in the
Verification Manual.
!
frinside.fm Page 1 Friday, November 17, 2000 2:50 PM
Quick Start Guide
OmniBER 725
qs.bk Page 1 Friday, November 17, 2000 2:49 PM
2
This Quick Start Guide demonstrates the basic operation of the OmniBER 725. It shows you how to select
displays and use them to change the instrument settings. The Quick Start Guide includes the following
sections:
• Introducing the OmniBER Front Panel
• Introducing Smart Test
• Viewing Single or Multiple Windows
• Changing Instrument Settings
• Using the Pop-up Application
• Viewing Settings on an External Monitor
• Status Alarms
About This Book
qs.bk Page 2 Friday, November 17, 2000 2:49 PM
3
Contents
Contents
Keyboard and Display Conventions . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introducing the OmniBER Front Panel. . . . . . . . . . . . . . . . . . 6
Monitoring Status Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Introducing Smart Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Viewing Single or Multiple Windows . . . . . . . . . . . . . . . . . . 11
Multiple Window Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Single Window Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing Instrument Settings . . . . . . . . . . . . . . . . . . . . . . . . 13
Viewing the Contents of Folders . . . . . . . . . . . . . . . . . . . . . . . 15
Using the Pop-up Application . . . . . . . . . . . . . . . . . . . . . . . . . 16
Viewing Settings on an External Monitor . . . . . . . . . . . . . . . 19
Status Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
General Alarm Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Jitter Alarm Indicators (J1409A only). . . . . . . . . . . . . . . . . . . 20
SDH Alarm Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SONET Alarm Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
qs.bk Page 3 Friday, November 17, 2000 2:49 PM
4
Keyboard and Display Conventions
Keyboard and Display Conventions
The conventions used in this manual to illustrate instrument keys and display
information are as follows:
This is an example of a hardkey. Hardkeys (located to the right of the display) are
used to give access to different sets of instrument settings, or select dedicated
instrument functions. The key shown here displays the transmit settings.
This is an example of a softkey. Softkeys (located below the display) are used to
select instrument settings. The values associated with softkeys change as you move
the display cursor from one instrument setting to another.
These are the cursor control keys. They are used to move the display cursor from
one instrument setting to another.
This is an example of a pop-up menu. Pop-up menus are an alternative way of
selecting instrument settings (instead of using softkeys). To access a pop-up menu,
highlight an instrument setting, then use the key to complete the selection.
This symbol (when it appears next to settings on the display) indicates that there is a
pop-up menu associated with the instrument setting. To access a pop-up menu,
highlight the instrument setting which has this symbol, then use the key.
This symbol appears at the bottom right of the display when an optical transmit
module is fitted to the instrument. The symbol’s background changes from black to
yellow when the optical output is switched on.
TRANSMIT
PARALLEL
SET
SET
qs.bk Page 4 Friday, November 17, 2000 2:49 PM
5
Introduction
Introduction
Agilent’s OmniBER Communications Performance Analyzer provides the test
capability you need to verify the performance of today’s high-capacity transmission
systems and networks.
The main features of this instrument are:
• Framed and unframed SDH/SONET BER testing up to 2.5 Gb/s (STM-16/OC-
48) with J1408
• The addition of Jitter testing with J1409A.
• Optical and electrical interfaces.
• Seperate clock and data binary interfaces, electrically coded at 52Mb/s,
155Mb/s, 625Mb/s and 2.5Gb/s.
• Concatenated payload testing up to STM-16c/OC-48c.
• Measurement capabilities including protection switching tests, and pointer
processing.
• Fast access to key measurement tasks using Agilent’s Smart Test capability.
qs.bk Page 5 Friday, November 17, 2000 2:49 PM
6
Introducing the OmniBER Front Panel
Introducing the OmniBER Front Panel
Softkeys
Select instrument settings. The
values displayed on the softkeys
are associated with the instrument
control currently highlighted by the
cursor.
Press this key to access Smart Test settings.
Press this key to access settings associated with the transmitter.
Press this key to access settings associated with the receiver.
Press this key to access settings associated with the test timing and graph storage, and to
display measurement results.
Press this key to access settings associated with stored graphical results.
Press this key to access the following instrument utilities:
Stored Settings; Settings Control; Floppy Disk, Logging (printing); Remote Control;
Time & Date; Miscellaneous (settings); Options (and s/w revisions); Self Test; Trigger
Out
p
ut
;
Calibration and Color Control.
SMART TEST
TRANSMIT
RECEIVE
RESULTS
GRAPH
OTHER
Cursor control keys
Move the display cursor from
one instrument setting to
another.
Pop-up menu keys
An alternative way to select
instruments settings (instead of
using softkeys).
In-lid Printer
Connector
External
Monitor
Connector
Display
Operates in either single or
multiple window mode.
Hardkeys
qs.bk Page 6 Friday, November 17, 2000 2:49 PM
7
Introducing the OmniBER Front Panel
Press this key to immediately log
selected results or screen dumps to the
printer.
Press this key to advance the paper in the
internal printer.
PRINT NOW
PAPER FEED
Press this key to start a
new test period or
terminate the current test
period. The indicator
above the key lights when
a test period is in progress.
RUN/STOP
Press this key to add
a single error to the
transmitted signal.
The type of error
added is selected on
the Error & Alarm
display.
SINGLE
Press this key to change the instrument
from Remote to Local control. The
indicator above the key lights when the
instrument is under Remote control.
LOCAL
CAUTION Do not press while loading a new roll
of paper in the printer. Wait until the paper is fed
through the printer mechanism. A paper jam could
result which would disable the printer.
PAPER FEED
qs.bk Page 7 Friday, November 17, 2000 2:49 PM
8
Introducing the OmniBER Front Panel
Monitoring Status Alarms
The LED indicators provide information about the current status of the instrument’s
receiver. If an alarm has occurred during the current test period, the HISTORY
indicator lights up. The figure below shows the status indicators for the dual
standard SDH/SONET option (Option 002).
These three indicators change
from green to red when an alarm
conditions occurs.
Press and hold this key to view the alarm history. When this key is
released the status indicators return to displaying the current status.
The HISTORY indicator lights when an alarm has occurred during
the current test period.
SHOW
Press this key to reset the HISTORY store (all lit indicators
extinguish). If an alarm condition is present during the reset, then
the indicators associated with that alarm will remain lit after the
reset. The resetting of the HISTORY store also occurs when you
start a new test period.
RESET
The PDH, DSn and ATM Alarm
Indicators are not used by the
Omniber 725.
qs.bk Page 8 Friday, November 17, 2000 2:49 PM
Table of contents
Other Agilent Technologies Laboratory Equipment manuals
Agilent Technologies
Agilent Technologies AssayMAP Bravo Platform User manual
Agilent Technologies
Agilent Technologies InfinityLab LC Series User manual
Agilent Technologies
Agilent Technologies E7473A User manual
Agilent Technologies
Agilent Technologies 708-DS User manual
Agilent Technologies
Agilent Technologies 1260 Infinity II Quaternary System User manual
Agilent Technologies
Agilent Technologies Cary 8454 User manual
Agilent Technologies
Agilent Technologies 7683 User manual
Agilent Technologies
Agilent Technologies 1100 Series User manual
Agilent Technologies
Agilent Technologies ZORBAX RRHT Series User manual
Agilent Technologies
Agilent Technologies 240 Series AA User manual
Agilent Technologies
Agilent Technologies G1978B User manual
Agilent Technologies
Agilent Technologies PlateLoc User manual
Agilent Technologies
Agilent Technologies 1260Infinity II Bio-inert FractionCollector User manual
Agilent Technologies
Agilent Technologies Cary 3500 User manual
Agilent Technologies
Agilent Technologies Velocity11 VSpin User manual
Agilent Technologies
Agilent Technologies 75000 Series C User manual
Agilent Technologies
Agilent Technologies 5975C TAD VL MSD Operating manual
Agilent Technologies
Agilent Technologies 1260 Infinity User manual
Agilent Technologies
Agilent Technologies G1701EA User manual
Agilent Technologies
Agilent Technologies 1141A Manual
Popular Laboratory Equipment manuals by other brands
Endress+Hauser
Endress+Hauser Cleanfit CPA875 operating instructions
NI
NI PXI-5422 CALIBRATION PROCEDURE
Collomix
Collomix Aqix operating instructions
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series operating manual
Ocean Insight
Ocean Insight FLAME-NIR+ Installation and operation manual
Parker
Parker ALIGN-MG-NA Installation, operation and maintenance manual
