Advantech TPC-1560 User manual

TPC-1560

High performance operator interface

terminal with 15” flat panel display

User's Manual

This document is copyrighted 2001 by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd. reserves the right to make improve-

ments to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this manual

is intended to be accurate and reliable. However, Advantech Co., Ltd.

assumes no responsibility for its use, nor for any infringements upon

the rights of third parties which may result from its use.

Acknowledgments

TPC-1560 is a trademark of Advantech Co., Ltd. IBM, PC/AT, Micro-

Drive, and PS/2 are trademarks of International Business Machines

Corporation. MS-DOS and Windows CE are trademarks of Microsoft

Corporation. All other brand and product names mentioned herein are

trademarks or registered trademarks of their respective holders.

1st edition September 2001

Packing List

In the whole set of TPC-1560 there are items as listed below:

1. TPC-1560

2. Accessory kit which includes

(1) HDD cover screws

(2) HDD cushions

(3) Panel mounting clamper

(4) Panel mounting screws

(5) PC/104 plus expansion board standoff

(6) 3-pin power connector

(7) TPC-1560 support CD

(8) 32MB CompactFlash memory card with Windows CE operating

system

(9) 1 meter 9-pin to 9-pin null modem cable

(10) Microsoft Windows CE end user license agreement

(11) Y-cable to simultaneously connect mouse and keyboard

(12) PC/104 plus dummy connector

(13) CompactFlash to IDE adapter board (refer to Appendix E.2)

(14) 44-40-40 pins IDE cable

(15) Grounding wire

Remark: 1. Only available in the model bundled with

Windows CE OS

FCC Class A

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio

frequency energy. If not installed and used in accordance with this

user's manual, it may cause harmful interference to radio communica-

tions. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to

correct the interference at his own expense.

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this installation reference guide for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the equip-

ment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or electrical

shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If any of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the installation reference guide.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -

20° C (-4° F) OR ABOVE 60° C (140° F). IT MAY DAMAGE THE

EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982

is equal to or less than 70 dB(A).

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor

überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt

werden.

8. Beachten Sie beim AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es

sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es

vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine

Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten

in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag

auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

a. Netzkabel oder Netzstecker sind beschädigt.

b. Flüssigkeit ist in das Gerät eingedrungen.

c. Das Gerät war Feuchtigkeit ausgesetzt.

d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend

funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung

erzielen.

e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Bitte lassen Sie das Gerät nicht unbehehrt hinten unter -20° C (-4° F) oder

oben 60° C (140° F), weil diesen Temperaturen das Gerät zerstören könten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt

70dB(A) oder weiger.

DISCLAIMER: This set of instructions is provided according to IEC704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained therein.

Contents

CHAPTER 1 GENERAL INFORMATION1

1.1 Introduction.................................................................. 2

1.2 Specifications ............................................................... 3

1.2.1 System kernel (CPC-2365) ................................... 3

1.2.2 I/O ports ................................................................ 3

1.2.3 Storage .................................................................. 4

1.2.4 Safety and environment ......................................... 4

1.3 LCD specifications ...................................................... 5

1.4 Touchscreen specifications........................................ 6

1.5 Power ............................................................................ 6

1.6 I/O ports arrangement................................................ 6

1.7 Mounting ...................................................................... 7

1.7.1 Panel mounting ...................................................... 7

1.7.2 Wall mounting/desktop stand ................................. 8

1.8 Exploded diagram ....................................................... 9

1.9 Dimensions and cutout ............................................. 10

Chapter 2 System Quick Starting ............................ 11

Chapter 3 The Engine of the TPC-1560 .................. 17

3.1 Introduction................................................................ 18

3.2 CPC-2365 main board .............................................. 18

3.2.1 Connector pin assingments ...................................19

3.3 TPC-1560 I/O board ................................................. 20

Chapter 4 System Limitations ................................. 23

4.1 Compatibility with IBM MicroDrive...................... 24

4.2 System Hibernation and Resuming ........................ 25

4.3 Compatibility with IDE CD-ROM Drives ............. 25

4.4 USB Devices .............................................................. 26

4.5 Power Management .................................................. 26

Chapter 5 System Tuning ........................................ 27

5.1 LCD contrast tuning ................................................. 28

5.1 LCD brightness tuning.............................................28

5.2 Touchscreen calibration ........................................... 29

5.2.1 DOS/Windows Family ..........................................29

Chapter 6 Maintenance ............................................ 31

6.1 CPU board replacement .................................... 32

6.2 Fuse replacement ............................................... 34

Appendix A Serial Port Settings .............................. 35

A.1 Baud Rate Settings (SW1) ....................................... 36

A.2 Data Format/RS-422 Control Settings ................... 37

A.3 COM3 Mode Selecting ............................................ 37

Appendix B Watchdog Timer Programming..............39

B.1 Watchdog timer programming example ................. 40

Appendix C Windows 2000 Touch Screen

Installation ................................................. 41

C.1 Touchscreen driver in Windows 2000 ................... 42

Appendix D Fuse Specifications ............................. 51

Appendix E HDD Module Assembling/Dismounting .

Guide ........................................................... 53

E.1 HDD Module Assembling/Dismounting Guide .... 54

E.2 Install Operating System on the TPC-1560 .......... 60

Appendix F BIOS Setting ......................................... 57

F.1 Boot Devices ............................................................. 58

F.2 PC Status Monitoring ............................................... 59

Figure

Figure 1.6-1 Panel mounting .................................................................... 7

Figure 1.7-1 I/O ports arrangement .......................................................... 7

Figure 1.8-1Exploded diagram ................................................................. 9

Figure 1.9-1 Dimensions and cutout ...................................................... 10

Figure 2-1 Unpack the package ............................................................. 12

Figure 2-3 Install CompactFlash memory card ...................................... 13

Figure 2-4 Power connector and power lines ........................................ 13

Figure 2-5 Power connector pin assignment ........................................ 14

Figure 2-6 Plug the power lines to the system power receptor. ............. 14

Figure 2-7 Turn on power switch ............................................................ 15

Figure 3.2-1 TPC-1560 main board ........................................................ 18

Figure 3.3-1 TPC-1560 I/O board ............................................................ 20

Figure 5.1-1 Adjust LCD contrast ............................................................ 28

Figure 5.1-2 Remove the CPU Board cover ........................................... 28

Figure 5.1-3 Adjusting the LCD brightness ............................................ 29

Figure 6.1-1 CPU board cover ................................................................ 32

Figure 6.1-2 Remove the CPU board cover ............................................ 32

Figure 6.1-3 Remove the CPU board ..................................................... 33

Figure 6.2-1 Replace the fuse ................................................................ 34

Figure C-1 Hardware ............................................................................... 42

Figure C-2 Device manager .................................................................... 43

Figure C-3 Uninstall the driver ................................................................ 44

Figure C-4 Mouse properties ................................................................. 45

Figure C-5 Update driver ........................................................................ 46

Figure C-6 Select driver from known list ................................................ 47

Figure C-7 Find out TouchScreen in the manufacturers list .................. 48

Figure C-8 Re-install the driver .............................................................. 49

Figure C-9 Finish installation of touchscreen driver .............................. 50

Table

Table 1.1-1 LCD specifications ................................................................. 5

Table 1.2-1 Touchscreen specifications ................................................... 6

Table 3.2-1 TPC-1560 main board connector/jumper list ...................... 18

Table 3.2-2 J1 RTC control jumper ......................................................... 19

Table 3.3-1 TPC-1560 I/O board connector/jumper list .......................... 21

Table of contents

Other Advantech Touch Panel manuals

Advantech

Advantech TPC-51WP Series User manual

Advantech

Advantech POC-128 Instruction manual

Advantech

Advantech IPPC-8151S Series User manual

Advantech

Advantech PPC-3210SW User manual

Advantech

Advantech TPC-1260 User manual

Advantech

Advantech TPC-1550H User manual

Advantech

Advantech IPPC-7157 Series User manual

Advantech

Advantech IPPC-6152A User manual

Advantech

Advantech PPC-6151C User manual

Advantech

Advantech TPC-1250H User manual

Advantech

Advantech TPC-1260G User manual

Advantech

Advantech PPC-100 User manual

Advantech

Advantech SPC-57 User manual

Advantech

Advantech TPC-1881WP Series User manual

Advantech

Advantech TPC-1261H User manual

Advantech

Advantech POC-W211 Instruction manual

Advantech

Advantech PPC-3151-650AE Installation and operation manual

Advantech

Advantech PPC-157T User manual

Advantech

Advantech PPC-L126 User manual

Advantech

Advantech POC-W152 Instruction manual

Advantech

Advantech UltraSlim PPC-S153 User manual

Advantech

Advantech TPC-1770 User manual

Advantech

Advantech PPC-6121 User manual

Advantech

Advantech SPC-515 Series User manual

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

Acnodes

Acnodes PC 1150 installation guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

B&R Industries

B&R Industries MAPPC900-ENG user manual